Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your SOLIDEE 32 Inch Black Bathroom Vanity. Please read all instructions carefully before beginning assembly or use to ensure safe and proper functionality. Keep this manual for future reference.
Safety Information
Always unplug and turn off the water supply before installing or maintaining the vanity. Be cautious of sharp edges and heavy components to prevent injury. Use appropriate safety gear when handling heavy items. Keep the area around the vanity clear to prevent tripping hazards. Always supervise children around the vanity.
Package Contents
Your SOLIDEE Bathroom Vanity is shipped in two separate packages. Please ensure all components are present before beginning assembly.
Image: Contents are shipped in two packages, requiring self-assembly.
- Package 1: Main cabinet, all hardware for cabinet assembly, Installation Manual.
- Package 2: Vessel sink (Black and White Ceramic Sink), Faucet, Pop-up drain, Hot/cold lines, all hardware for sink and faucet installation.
If any parts are missing or damaged, please contact customer support immediately.
Setup and Assembly Instructions
Assembly of this vanity is required. It is recommended to have two people for assembly due to the size and weight of components. Gather all tools before starting. Tools typically required include a screwdriver (Phillips and flathead), adjustable wrench, and level.
Step 1: Unpack and Identify Components
Carefully unpack all items from both packages. Lay out all parts on a clean, soft surface to prevent scratches. Refer to the parts list in your installation manual to identify each component.
Step 2: Assemble the Vanity Cabinet
Follow the step-by-step diagrams provided in the separate installation manual for assembling the MDF wood cabinet. Ensure all cam locks and screws are tightened securely. The cabinet features soft-close doors and four side drawers for storage.
Image: Vanity cabinet dimensions and details.
Image: Interior view of the vanity cabinet showing storage layout.
Step 3: Install the Sink and Faucet
Place the black and white ceramic vessel sink onto the vanity top. Connect the faucet, pop-up drain, and hot/cold lines according to the plumbing instructions. Ensure all connections are watertight to prevent leaks.
Image: Black and white ceramic vessel sink with faucet.
Image: Ceramic sink dimensions and material details.
Image: Faucet, pop-up drain, and water lines included.
Step 4: Final Placement and Connection
Position the assembled vanity in its desired location. Connect the hot and cold water supply lines to your home's plumbing. Connect the drain to the P-trap. Turn on the water supply and check for any leaks. Adjust the vanity to be level using the rust-proof alloy leg pads if necessary.
Operating Instructions
The SOLIDEE Bathroom Vanity is designed for standard bathroom use. The faucet operates by lifting the handle for water flow and tilting it left for hot water or right for cold water. The soft-close doors and drawers ensure quiet operation and prevent slamming. Utilize the two-tier cabinet and four side drawers for organizing bathroom essentials.
Maintenance
Cleaning the Vanity Cabinet
- Wipe the engineered wood surfaces with a soft, damp cloth.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Promptly wipe up any water spills to prevent moisture damage.
Cleaning the Ceramic Sink
- Clean the ceramic sink with mild soap and water.
- For stubborn stains, use a non-abrasive bathroom cleaner.
- Rinse thoroughly after cleaning to remove all cleaner residue.
Faucet and Hardware Care
- Wipe chrome zinc alloy knobs and faucet with a soft, dry cloth to maintain shine.
- Avoid using abrasive cleaners on metal finishes.
- Periodically check all plumbing connections for tightness to prevent leaks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose plumbing connections; damaged seals. | Tighten all water supply and drain connections. Inspect seals and replace if damaged. |
| Drawers or Doors Stick/Don't Close Properly | Misalignment during assembly; obstruction. | Check assembly for proper alignment of hinges and drawer slides. Remove any obstructions. Adjust leg pads to ensure vanity is level. |
| Faucet Drips/Low Water Pressure | Worn washer; clogged aerator; water supply issue. | Replace worn washers. Clean or replace the faucet aerator. Check home's water supply pressure. |
| Vanity Wobbles | Uneven floor; loose assembly. | Adjust the rust-proof alloy leg pads to stabilize the vanity. Ensure all assembly screws are tight. |
Specifications
| Brand | SOLIDEE |
| Model Number | BA20701 |
| Color | Black and White Ceramic Sink |
| Material | Engineered Wood (Cabinet), Ceramic (Sink), Zinc Alloy (Handles) |
| Product Dimensions (D x W x H) | 19"D x 32"W x 31.5"H |
| Sink Dimensions (L x W x H) | 19.3" x 15.2" x 5.3" |
| Number of Drawers | 4 |
| Number of Doors | 2 |
| Number of Shelves | 1 (inside cabinet) |
| Installation Type | Freestanding, Floor Mount |
| Assembly Required | Yes |
| Item Weight | 96 Pounds |
Warranty Information
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact SOLIDEE customer support.
Customer Support
For assistance with assembly, missing parts, or any other inquiries, please contact SOLIDEE customer support. Refer to your purchase documentation for contact details or visit the official SOLIDEE website.
Online Support: Visit the SOLIDEE Store on Amazon