ECHTPower Wireless PC Gaming Controller User Manual

Introduction

Thank you for choosing the ECHTPower Wireless PC Gaming Controller. This manual provides detailed instructions on setting up, operating, and maintaining your controller to ensure optimal performance and an enhanced gaming experience. This controller is designed for multi-platform compatibility, including PC, Switch, iOS, and Android devices, offering versatile connection options such as 2.4G wireless, Bluetooth, and USB-C wired.

Figure 1: ECHTPower Wireless PC Gaming Controller (Black)

Setup and Connection

The ECHTPower controller offers multiple ways to connect to your devices. Ensure the mode switch on the back of the controller is set to the appropriate platform before attempting to connect.

1. 2.4G Wireless Connection (PC/Android TV/Laptop)

For a stable and high-polling rate connection, use the included 2.4G USB receiver.

1. Locate the mode switch on the back of the controller.
2. Slide the switch to the "Receiver" mode (often indicated by a symbol or "A" for Android/PC).
3. Insert the 2.4G USB receiver into an available USB port on your PC, Android TV, or laptop.
4. Press the HOME button on the controller. The green light on the controller will indicate a successful connection.

Figure 2: 2.4G Wireless Connection Setup

2. Bluetooth Connection (Android/iOS/Tablet/Steam Deck)

Connect your controller wirelessly to compatible mobile devices and Steam Deck via Bluetooth.

1. Slide the mode switch on the back of the controller to the "Bluetooth" mode (often indicated by "BT").
2. Press and hold the HOME button on the controller for 3 seconds until the green light flashes, indicating it's in pairing mode.
3. On your Android/iOS device, go to Bluetooth settings and turn Bluetooth on.
4. Select "Xbox Wireless Controller" from the list of available devices to pair. The green light will become solid upon successful connection.

Figure 3: Bluetooth Connection Setup

3. Wired Connection (PC/Android TV/Steam Deck)

For a direct and reliable connection, use a USB-C cable.

1. Slide the mode switch on the back of the controller to the "Wired" mode (often indicated by a symbol or "A" for Android/PC).
2. Connect the controller to your PC, Android TV, or Steam Deck using a USB-C cable.
3. The green light on the controller will indicate a successful connection.

Figure 4: Wired Connection Setup

4. Nintendo Switch Connection

Connect your controller to your Nintendo Switch console.

1. Slide the mode switch on the back of the controller to the "NS" mode.
2. On your Nintendo Switch, navigate to "Controllers" > "Change Grip/Order".
3. Press and hold the HOME button on the controller until the white light flashes. The controller will then pair with the Switch.

Figure 5: Nintendo Switch Connection Setup

Operating Instructions

Turbo Function

The controller supports both manual and auto turbo functions, along with adjustable turbo speeds.

• Manual Turbo: Press the 'M' button and the desired action button (e.g., A, B, X, Y, LT, RT) simultaneously to activate manual turbo for that button.
• Auto Turbo: After setting manual turbo, press the 'M' button and the same action button again to activate auto turbo. The button will continuously trigger without needing to be held down.
• Disable Turbo: To disable turbo for a specific button, press the 'M' button and the action button a third time.
• Adjust Turbo Speed: Press and hold the 'M' button, then push the left joystick left or right to cycle through fast, medium, and slow turbo speeds. The light will blink according to the set speed.

Figure 6: Three Level Turbo Speed

Adjustable Vibration

Customize your gaming immersion with four adjustable vibration settings. This allows you to fine-tune the haptic feedback to your preference, from subtle rumbling to intense shakes.

Figure 7: Adjustable Vibration Settings

Dynamic RGB Lighting

Personalize your controller with dynamic RGB lighting. Choose from 9 colors and 4 lighting modes (Rainbow Flow, Steady, Breathing, Off) to match your setup or mood.

• Change RGB Mode: Press and hold the 'M' button, then press the R3 (right joystick press) button to cycle through different RGB modes (trigger-tracing, solid, breathing, flowing).
• Adjust Brightness: In trigger-tracing mode, the RGB brightness will change according to the same side trigger input.

Figure 8: Adjustable RGB Lighting

Hall Effect Joysticks

Experience flawless control with Hall Effect Joysticks, designed to eliminate joystick drift and provide precise input for millions of cycles. This technology ensures long-lasting accuracy and reliability.

Figure 9: Hall Effect Joysticks - No Drift

1000Hz Polling Rate

Achieve lightning-fast input registration with a 1000Hz polling rate when using 2.4G wireless or wired connections. This ensures minimal latency, crucial for competitive gameplay.

Figure 10: 2.4G & Wired 1000 Hz Polling Rate

Durable Gel Buttons

The conductive gel buttons are designed for enhanced tactile feedback and exceptional durability, tested for 1 million clicks to ensure long-lasting performance.

Figure 11: Conductive Adhesive Key Buttons

Battery Information

The controller is equipped with an 800mAh battery, providing up to 15 hours of playtime on a single charge. This ensures extended gaming sessions without frequent interruptions.

• Charging: Connect the controller to a power source using the provided USB-C cable. The indicator light will show charging status.
• Battery Life: A full charge provides approximately 15 hours of continuous gameplay.

Figure 12: 800mAh Large-Capacity Battery

Maintenance and Care

To ensure the longevity and optimal performance of your ECHTPower controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the controller. For stubborn dirt, slightly dampen the cloth with water or a mild electronic cleaner. Avoid harsh chemicals or abrasive materials.
• Storage: Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and excessive humidity.
• Handling: Avoid dropping the controller or subjecting it to strong impacts, as this can damage internal components.
• Charging: Do not overcharge the battery. Disconnect the charging cable once the controller is fully charged.

Troubleshooting

If you encounter any issues with your ECHTPower controller, refer to the following common troubleshooting steps:

• Controller Not Connecting:
  • Ensure the mode switch on the back of the controller is set correctly for your device (2.4G, BT, NS, Wired).
  • For wireless connections, ensure the controller is fully charged.
  • Try re-pairing the controller by following the connection steps for your specific device.
  • Restart your device (PC, Switch, phone) and try connecting again.
  • If using 2.4G wireless, try a different USB port for the receiver.
• Input Lag or Unresponsive Buttons:
  • Ensure you are within the effective range for wireless connections.
  • Check for interference from other wireless devices.
  • For PC, ensure your drivers are up to date.
  • Try connecting via wired mode to rule out wireless interference.
• Joystick Drift:
  • The Hall Effect Joysticks are designed to prevent drift. If you experience this, ensure the controller's firmware is up to date (check the manufacturer's website).
  • Perform a calibration if your system or game allows for it.
• Short Disconnect/Sleep Time (for Switch):
  • Some users have reported this. You may be able to adjust the "no operation shutdown time" using the KeyLinker app on your smartphone, if supported by the controller's firmware.

Product Specifications

Warranty and Support

ECHTPower products are designed for quality and reliability. For specific warranty details and technical support, please refer to the warranty card included with your product or visit the official ECHTPower website. You can also contact ECHTPower customer service through the platform where you purchased the product for assistance.

For the latest information and support resources, please visit: ECHTPower Official Store