Introduction
Thank you for choosing the MAF 5 Inch King Low Profile Box Spring. This manual provides essential information for the safe assembly, proper use, and maintenance of your new mattress foundation. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The MAF 5 Inch King Low Profile Box Spring, fully assembled.
Safety Information
Important Safety Precautions:
- Do not exceed the maximum weight recommendation of 3500 lbs. Overloading can cause structural damage and potential injury.
- Exercise caution with sharp edges during assembly and handling to prevent cuts or scrapes.
- Always assemble and move the product with care. It is recommended to have two adults for assembly and relocation.
- Ensure all bolts and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep small parts away from children during assembly to prevent choking hazards.
Package Contents
Before assembly, verify that all components are present. If any parts are missing or damaged, please contact customer support.
- Box Spring Frame Components (Metal Slats, Support Frames)
- Fabric Cover
- Installation Manual (this document)
- Assembly Tools (Allen wrench, small wrench)

Image: All components of the MAF Box Spring laid out before assembly.
Assembly Instructions
The MAF Box Spring features a folding design for easier setup. Follow these steps carefully for proper assembly. It is recommended to use a cordless drill with an appropriate bit for faster and easier tightening, though an Allen wrench is provided.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Refer to the parts list to ensure all pieces are present.
- Unfold Frame Sections: The metal frame comes in pre-assembled folding sections. Gently unfold these sections as indicated in the diagram below.
- Connect Frame Sections: Align the pre-drilled holes of the frame sections and secure them using the provided bolts and nuts. Do not fully tighten all bolts until the entire frame is assembled.
- Install Support Slats: Position the metal slats into their designated slots or attachment points on the frame. Ensure they are evenly spaced and securely fitted.
- Tighten All Fasteners: Once all frame sections and slats are in place, go back and securely tighten all bolts and nuts. Ensure the frame is stable and rigid.
- Apply Fabric Cover: Drape the removable fabric cover over the assembled box spring. The cover is designed to fit snugly. Ensure the rounded corners of the box spring align with the cover. The cover attaches with Velcro.

Image: Visual guide demonstrating the foldable design and easy setup process of the box spring.
Assembly Videos
Queen Box Spring Heavy Duty Queen Size BedBase Easy Assembly
Video: A demonstration of the easy assembly process for the MAF Box Spring. This video shows the assembly of a Queen size, but the King size follows a similar procedure.
Box Spring for Queen Bed with BoxSpring Cover
Video: This video highlights the box spring and its included cover, demonstrating how it fits onto a bed frame. Applicable to King size.
MAF Box Spring Bed Base 3500 lbs with BoxSpring Cover
Video: A detailed look at the MAF Box Spring, emphasizing its heavy-duty construction and the included cover. This video provides a good overview of the product's features.
MAF Box Spring for Queen Bed King Box Spring Installation
Video: This video demonstrates the installation of the box spring onto a bed frame, showing how it integrates with your existing bed setup.
Operating and Usage
The MAF 5 Inch King Low Profile Box Spring is designed to provide stable and silent support for your mattress.
- Placement: Place the assembled box spring directly onto your King size bed frame. Ensure it is centered and sits securely within the frame.
- Mattress Compatibility: This box spring is compatible with various mattress types, including innerspring, memory foam, and latex mattresses.
- Low Profile Design: The 5-inch height is ideal for taller mattresses or for users who prefer a lower bed height.
- Noise-Free Operation: The heavy-duty construction and U-shaped groove design minimize noise, providing a quiet sleep environment.
- Weight Capacity: The box spring is engineered to support up to 3500 lbs, ensuring durability and stability.
- Rounded Corners: The four rounded corners are a safety feature designed to protect against accidental injury.

Image: The MAF Box Spring positioned on a bed frame with a mattress on top, illustrating proper usage.
Maintenance
Proper care will extend the life of your MAF Box Spring.
- Cleaning the Cover: The included fabric cover is removable and washable. Follow the care instructions on the cover's label for best results.
- Frame Cleaning: Wipe the metal frame with a dry cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners.
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if any looseness is detected.

Image: The MAF Box Spring with its removable fabric cover, highlighting the easy-clean feature.
Troubleshooting
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
- Squeaking Noise: If the box spring develops a squeak, first ensure all assembly bolts are fully tightened. Loose connections are the most common cause of noise. Check that the box spring is sitting evenly on your bed frame.
- Difficulty Assembling: If you find assembly challenging, ensure you are following the instructions step-by-step. Using a cordless drill with an appropriate Allen bit can significantly ease the process of tightening bolts. Do not fully tighten all bolts until the entire frame is loosely assembled.
- Missing Parts: Before discarding packaging, thoroughly check for all components. If parts are genuinely missing, contact MAF customer support immediately for assistance.
- Uneven Support: Verify that the box spring is correctly positioned on your bed frame and that all slats are properly seated. Ensure your bed frame itself is level and stable.
Specifications
| Feature | Detail |
|---|---|
| Model Number | MAF-MT33-05K |
| Size | King |
| Product Dimensions (L x W x H) | 78.8" x 75.5" x 5" |
| Material | Metal |
| Maximum Weight Recommendation | 3500 lbs |
| Special Feature | Foldable, Low Profile, Noise-Free, Rounded Corners |
| Included Components | Box Spring, Fabric Cover, Installation Manual, Assembly Tools |
| Product Care Instructions | Wipe with Dry Cloth |

Image: Diagram illustrating the dimensions of the MAF Box Spring.
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase documentation or visit the official MAF website. Please have your model number (MAF-MT33-05K) and purchase date ready when contacting support.