Introduction
Thank you for choosing the SOLIDEE 24 Inch White Bathroom Vanity. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new bathroom vanity. Please read all instructions carefully before beginning to ensure proper setup and long-lasting enjoyment of your product.
Important Safety Information
Failure to follow these instructions could result in property damage, injury, or death.
- Always unplug and turn off the water supply before performing any maintenance or installation.
- Be cautious of water and electrical hazards.
- Use appropriate safety gear when handling heavy components.
- Always follow the manufacturer's instructions for safe installation and use.
- This product requires self-assembly. Ensure all parts are present and undamaged before starting.
Package Contents
Your SOLIDEE Bathroom Vanity is shipped in two packages. Please verify that all components listed below are included in your shipment.
- Package 1: 1 x Main cabinet, 1 x All hardware includes, 1 x Installation Manual
- Package 2: 1 x Vessel sink, 1 x Faucet and Drain, 1 x All hardware includes
Image: The vanity is shipped in two separate boxes to ensure safe delivery of all components.
Product Dimensions
Refer to the diagrams below for detailed product dimensions.
- Bathroom Vanity size: 19"D x 24"W x 31.5"H
- Sink dimension: 21" L x 6.3'' W
- Bowl thickness: 0.5"
Image: Detailed dimensions of the vanity cabinet, including height, width, depth, and faucet hole measurements.
Image: Dimensions and material specifications for the vessel sink.
Image: Overall dimensions of the vanity with the vessel sink installed.
Assembly Instructions
This vanity requires self-assembly. Follow the step-by-step instructions provided in the included manual. Ensure all hardware is used correctly for a stable and secure structure.
- Identify all parts and hardware using the provided list.
- Assemble the cabinet frame according to the diagrams.
- Install the drawer slides and assemble the drawer.
- Attach the soft-close hinges to the cabinet doors and then to the cabinet frame.
- Place the marble texture countertop onto the assembled cabinet.
- Install the vessel sink, faucet, and pop-up drain according to their specific instructions.
For a visual guide on general vanity assembly, you may refer to the following video:
Video: General assembly guide for a classic bathroom vanity. While not specific to SOLIDEE, it demonstrates common assembly steps.
For detailed instructions on adjusting door hinges, refer to this guide:
Video: Operation guide for adjustable door hinges, useful for fine-tuning cabinet door alignment.
Image: Features of the vanity including marble texture top, eco-friendly board, and easy installation via alphanumeric labeling.
Installation
After assembly, position the vanity in your desired bathroom location. Connect the faucet to the hot/cold lines and the pop-up drain to your plumbing system. Ensure all connections are tight to prevent leaks. Secure the vanity to the wall using appropriate mounting hardware for stability.
Image: The SOLIDEE vanity installed in a bathroom, showcasing the gold boat glass sink and black faucet.
Operation
Your SOLIDEE vanity features soft-close doors, designed to prevent slamming and ensure quiet operation. Gently push the doors to close, and they will softly retract into place. The faucet operates by lifting and turning the handle to control water flow and temperature.
Image: The included faucet, pop-up drain, and water lines for installation.
Maintenance
To maintain the beauty and longevity of your SOLIDEE bathroom vanity, follow these care instructions:
- Clean the cabinet surfaces with a soft, damp cloth and mild soap. Avoid abrasive cleaners.
- Wipe spills immediately to prevent water damage, especially on the marble texture top.
- For the glass sink, use non-abrasive glass cleaner and a soft cloth.
- Regularly check plumbing connections for any signs of leaks and tighten if necessary.
- Inspect hinges and drawer slides periodically and lubricate if needed to ensure smooth operation.
Troubleshooting
If you encounter any issues with your vanity, consider the following common solutions:
- Leaking Faucet/Drain: Check all plumbing connections for tightness. Ensure Teflon tape or plumber's putty was used where recommended.
- Wobbly Cabinet: Verify that the vanity is securely fastened to the wall studs. Adjust leg levelers if present.
- Doors Not Closing Properly: Adjust the soft-close hinges as shown in the hinge adjustment video in the assembly section.
- Drawer Sticking: Ensure drawer slides are properly aligned and free of obstructions.
Specifications
| Feature | Detail |
|---|---|
| Brand | SOLIDEE |
| Model Name | BA20701 |
| Product Dimensions | 19"D x 24"W x 31.5"H |
| Color | White (Cabinet), Glod Boat Glass (Sink) |
| Material | MDF Wood (Frame), Marble-effect Laminate (Top), Tempered Glass (Sink) |
| Mounting Type | Floor Mount |
| Installation Type | Freestanding |
| Number of Shelves | 2 |
| Item Weight | 55 Pounds |
| Assembly Required | Yes |
Warranty and Support
Your SOLIDEE bathroom vanity is designed for quality and durability. For specific warranty details, please refer to the documentation included with your purchase or contact SOLIDEE customer support.
- Return Policy: This product is eligible for a 30-day refund/replacement policy.
- Customer Support: For assistance with assembly, parts, or any other inquiries, please contact SOLIDEE customer support.