Beizun Anti-Spy & Privacy Screen Protector for iPhone 15/iPhone 16 (6.1-inch)

Introduction

This manual provides detailed instructions for the installation, use, and maintenance of your Beizun Anti-Spy & Privacy Screen Protector. Designed for iPhone 15 and iPhone 16 (6.1-inch) models, this tempered glass screen protector offers enhanced privacy and robust protection for your device's display.

What's in the Box

• Three (3) Beizun Anti-Spy & Privacy Screen Protectors
• One (1) Dust-free installation tool box (alignment frame)
• One (1) Cleaning kit (alcohol wipes, dry wipes, dusting stickers)
• One (1) Instruction manual

Image: Contents of the Beizun Anti-Spy & Privacy Screen Protector package, including three screen protectors, an auto-install frame, and cleaning accessories.

Setup & Installation

Follow these steps for a bubble-free installation using the provided auto-install kit.

1. Clean Your Device: Use the alcohol wipe (Wet Wipe 1) to thoroughly clean your iPhone screen. Follow with the dry wipe (Dry Wipe 2) to remove any moisture. Use the dust-absorber sticker to remove any remaining dust particles. Ensure the screen is completely clean and dry.
2. Position the Installation Frame: Place your iPhone into the dust-free installation tool box (alignment frame), ensuring it is securely seated.
3. Apply the Screen Protector: Remove the protective film from the screen protector. Align the screen protector with the top edge of the installation frame. Gently lower the screen protector onto your phone's screen. The alignment frame will guide it into the correct position.
4. Activate Adhesion: Press firmly along the center of the screen protector, then gently swipe outwards towards the edges to ensure full adhesion and remove any air bubbles.
5. Remove the Frame: Once the screen protector is fully adhered, carefully remove the installation frame from your iPhone.
6. Final Touches: Use the dry cloth to gently wipe down the screen protector, ensuring no smudges or remaining bubbles.

Image: The auto-install kit in use, demonstrating how the screen protector is aligned and applied to the iPhone screen for a dust-free, bubble-free result.

Installation Videos

Operating Instructions

Privacy Feature

The Beizun Anti-Spy Screen Protector features a 28° viewing angle, providing dual-side anti-spy protection. This means your screen content is visible only to you when viewed directly, becoming obscured to those viewing from the sides. This design ensures your sensitive information remains private without significantly compromising front-view brightness or touch sensitivity.

Image: Visual representation of the 28-degree privacy angle, showing how the screen content is visible only to the direct viewer and obscured from side angles.

Touch Sensitivity & Clarity

The screen protector maintains the original touch sensitivity of your iPhone. Its AR optical clarity and anti-reflective coating minimize pixel distortion and enhance brightness by 30% for a clear viewing experience. A built-in low-light filter also helps reduce eye strain without affecting device sensors.

Case Compatibility

Designed with 0.3mm ultra-narrow borders, this screen protector ensures edge-to-edge coverage that is compatible with most phone cases, preventing lifting or interference.

Maintenance

Cleaning

The electroplated oil-repellent surface repels fingerprints and smudges. To clean, gently wipe the screen protector with a soft, lint-free cloth. Avoid harsh chemicals or abrasive materials that could damage the coating.

Image: Close-up of the screen protector's anti-contaminant nano-coating, showing its ability to repel liquids and resist smudges.

Troubleshooting

Bubble Removal

If small bubbles appear along the edges after installation, use a dry cloth or the provided squeegee to gently press them towards the nearest edge until they disappear. For larger bubbles in the middle of the screen, gently lift the nearest corner of the screen protector until it reaches the bubble, then slowly lower the screen protector back into place, allowing it to re-adhere smoothly.

Specifications

Durability

The screen protector is made from military-grade 9H hardness tempered glass, designed to resist drops, scratches, and impacts. It features 3D curved edges for seamless integration with your device.

Image: A visual test illustrating the 9H hardness of the tempered glass, showing its resistance to scratches and impacts.

Warranty and Support

Beizun offers a 12-month warranty on this product. For any inquiries or assistance, please contact our lifetime US support team. Refer to the product packaging or the official Beizun website for contact details.