Avisontek OKP-BX Wireless Overhead Door Keypad Instruction Manual

Product Overview

The Avisontek OKP-BX Wireless Overhead Door Keypad provides convenient and secure access to your garage. This keypad is designed for compatibility with various Overhead Door and Genie garage door openers manufactured from 1995 to the present. It features rolling code encryption for enhanced security, a night light function for visibility, and a temporary password option for guests.

Key Features:

• Compatible with 1995 to Present Overhead Door Legacy, Python, Odyssey, Destiny, Phantom Garage Door Openers. Also replaces OKP-BX, GK-R, GK-BX, GWKPD-BL, GWK-IC, GWKP, ACSDA1, ACSDG, ACSD1G, B8QACSDA1, B8QACSDA.
• Wireless entry without a remote.
• Enhanced security with rolling code encryption and temporary password function.
• Long-lasting performance with a high-capacity AAA Alkaline battery.
• User-friendly design with night light function.
• Easy, wireless installation.

Note: This keypad does not support Dip Switch Garage Door Openers.

Package Contents

The package includes:

• Avisontek OKP-BX Wireless Keypad
• 1 C battery (pre-installed or included separately)
• User Manual (this document)
• Visor Clip

Setup and Programming

Follow these steps to set up and program your Avisontek OKP-BX Wireless Keypad. It is recommended to complete programming before mounting the keypad.

Step 1: Set a PIN on the Keypad

1. Ensure the keypad backlight is off. Do not press any buttons.
2. Press 3, 5, 7 in sequence, then press the PROGRAM button.
3. The LED will blink. Now, enter a unique 3-8 digit PIN number.
4. Press the PROGRAM button again.
5. The keypad will blink twice and shut off, confirming successful PIN programming.

Image: Keypad programming steps for setting a PIN. The image displays the keypad and the sequence of buttons to press (3, 5, 7, PROGRAM, your PIN, PROGRAM).

Step 2: Sync Keypad with Garage Door Opener

This step involves activating the "Learn" mode on your garage door opener and then entering your PIN on the keypad. The specific method for activating "Learn" mode varies by opener model. Refer to your garage door opener's manual for exact instructions.

Opener Programming Mode Option 1

A) Press and hold the program button on your opener until the LED button illuminates, then release.

B) The round LED will turn off and the long LED will begin flashing.

C) Return to Step 2 in Keypad to Opener Programming above.

Image: Diagram illustrating Opener Programming Mode Option 1, showing a button labeled "Program" and LED indicators.

Opener Programming Mode Option 2

A) Press then release the learn code button.

B) The LED will flash, indicating programming mode (30 seconds).

C) Return to Step 2 in Keypad to Opener Programming above.

Image: Diagram illustrating Opener Programming Mode Option 2, showing a "Learn Code" button and flashing LED indicators.

3. Confirm that the keypad backlight is off (do not press any buttons).
4. Enter your previously set PIN (from Step 1) into the keypad.
5. Press the UP or Down key on the opener 3-4 times until it operates to confirm successful programming.

Video Tutorial: Keypad Programming

Video: This video demonstrates the programming process for the Avisontek wireless keypad with a garage door opener. It shows how to set the PIN and sync the keypad with the opener's learn button.

Operation

Once programmed, operating your Avisontek OKP-BX Wireless Keypad is straightforward.

Opening/Closing the Garage Door

1. Enter your programmed 3-8 digit PIN.
2. Press the PROGRAM button.

The garage door opener will activate, opening or closing the door.

Temporary PIN Function

The keypad supports temporary PINs for guests or service personnel. Consult the full user manual for detailed instructions on setting and managing temporary access codes.

Image: The Avisontek keypad highlighting its night light feature for visibility in low light and the temporary PIN function for guest access.

Maintenance

Battery Replacement

The keypad is powered by one AAA Alkaline battery. When the keypad's backlight becomes dim or the keypad fails to respond, it is time to replace the battery.

1. Open the keypad cover.
2. Locate the battery compartment.
3. Remove the old AAA battery.
4. Insert a new AAA Alkaline battery, ensuring correct polarity.
5. Close the battery compartment and keypad cover.

Image: The Avisontek keypad with its battery compartment open, showing the location for AAA alkaline batteries.

Troubleshooting

If you encounter issues with your Avisontek OKP-BX Wireless Keypad, try the following troubleshooting steps:

• Keypad not responding: Check the battery. Replace if necessary.
• Door not opening/closing: Ensure the keypad is within range of the garage door opener (up to 164 feet). Re-verify programming steps.
• Incorrect PIN entry: Ensure you are entering the correct 3-8 digit PIN. If forgotten, you may need to reset and reprogram the keypad.
• Interference: Ensure there are no obstructions or strong radio frequency interference between the keypad and the opener.

If problems persist, refer to the support section for contact information.

Specifications

Image: Detailed product parameters for the OKP-BX keypad, including dimensions, working range, frequency, and battery type.

Warranty and Support

Warranty Information

The Avisontek OKP-BX Wireless Overhead Door Keypad comes with a 10-year warranty. This warranty covers manufacturing defects and ensures long-lasting performance.

Customer Support

For any queries, technical assistance, or warranty claims, please contact Avisontek customer support.

• Visit the Avisontek store homepage on Amazon and use the "Ask a question" feature.
• Contact support via email (refer to product packaging or official website for email address).

Avisontek provides 24-hour Amazon online tech support.

Image: Avisontek customer support information, highlighting 24-hour online tech support and warranty details.