Introduction
The Raddy WS-64 Automatic Plant Waterer is designed to provide precise and automated watering for up to 15 potted plants, suitable for indoor gardens, balconies, patios, or greenhouses. This system ensures your plants receive optimal hydration with customizable schedules, offering convenience and peace of mind, especially when you are away.
Image: The Raddy WS-64 main unit connected to plants, demonstrating its function.
What's in the Box?
Verify that all components are present in your package:
- Water Timer x 1
- 33ft 1/4" Pipe x 1
- Micro Dripper x 15
- T-barb Connector x 15
- Cross Connector x 1
- Sealing End x 2
- Filter x 1
- Regulating Valve x 1
- Tag Plate x 10
- Charging Port Cover x 2
- Hook x 1
- Check Valve x 1
- Type-C Cable x 1
- AA Battery x 4
- Cable Tie x 12
Image: Contents of the Raddy WS-64 package.
Key Features
- Tailored Watering Schedules: Customize precise watering plans with flexible settings, including start times (AM 12:00–PM 11:59), durations (0 min 0 sec to 30 min 59 sec), and intervals ranging from 1 hour to 30 days.
- Easy DIY Installation: The complete kit provides all necessary components for quick setup.
- Dual Watering Modes: Supports both automatic and manual watering for up to 15 potted plants.
- IPX4 Waterproof Design: Ensures reliable performance in damp conditions.
- Dual Power Options: Can be powered via a wired Type-C connection or 4 AA batteries (included).
- Travel-Ready & Reliable: Features anti-siphon valves and durable soft tubing for leak-free operation.
Setup Guide
Follow these steps for initial setup:
- Prepare the Water Timer: Insert 4 AA batteries into the battery compartment or connect the Type-C cable for power.
- Customize Pipe Length: Measure and cut the 1/4" tubing to appropriate lengths based on the layout of your plants and the water source.
- Connect Tubing to Timer: Connect one end of the main tubing to the 'IN' port and another piece to the 'OUT' port on the water timer.
- Install Check Valve and Regulating Valve: Attach the check valve and regulating valve to the outlet tube near the timer.
- Connect Drippers: Use T-barb connectors to branch off the main tubing and connect micro drippers for each plant. Secure connections with cable ties if needed.
- Attach Filter: Place the filter on the end of the inlet pipe and submerge it in your water reservoir (e.g., a bucket). Ensure the water source is placed below the watering system for proper function.
- Insert Drippers: Insert the micro drippers into the soil of each potted plant.
- Seal End: Install the sealing end cap at the end of the tubing line.
Image: Easy setup guide for the Raddy WS-64 system.
Image: System capacity and water source placement.
Operating Instructions
The Raddy WS-64 features an LCD screen, a setting knob, and control buttons for easy programming.
Image: Detailed view of the Raddy WS-64 control panel and ports.
Setting Watering Schedules
Use the setting knob and buttons to navigate the menu and set your desired watering parameters:
- Start Time: Set the time of day for watering to begin (AM 12:00 to PM 11:59).
- Duration: Specify how long the system should water (from 0 minutes 0 seconds to 30 minutes 59 seconds).
- Interval: Choose the frequency of watering, ranging from 1 hour to 30 days.
Press the 'OK' button to confirm settings and 'M' to switch between modes or menu options.
Manual Watering
The system also supports manual watering for immediate needs. Refer to the on-screen prompts or the quick start guide for specific steps to initiate manual watering.
Power Options
The Raddy WS-64 offers flexible power solutions:
- Type-C Connection: For continuous power, connect the provided Type-C cable to a compatible USB power adapter (not included).
- AA Batteries: For portability or backup, insert 4 AA batteries. Fresh AA batteries can last 2–3 months, ensuring uninterrupted operation.
Image: Raddy WS-64 demonstrating its dual power options: AA batteries and Type-C cable.
Adjustable Water Flow Control
The system includes a built-in regulating valve to control the overall water flow. This allows you to fine-tune the amount of water delivered to your plants, accommodating different plant needs and environmental conditions.
Image: Adjustable water flow control feature with regulating valve.
IPX4 Waterproof Rating
The Raddy WS-64 is designed with an IPX4 waterproof rating, meaning it is resistant to splashing water from any direction. This ensures reliable performance even in damp outdoor environments like balconies or patios, protecting the internal electronics from light rain or accidental splashes.
Image: Raddy WS-64 demonstrating IPX4 waterproof design.
Applications
The Raddy WS-64 is versatile and can be used in various settings:
- Indoor Garden: Ideal for maintaining houseplants within your home.
- Balcony Garden: Perfect for potted plants on balconies, providing consistent watering.
- Greenhouse: Suitable for automated irrigation in controlled greenhouse environments.
- Patio Planter: Ensures outdoor patio plants receive regular hydration.
Image: Various application scenarios for the Raddy WS-64.
Maintenance
To ensure optimal performance and longevity of your Raddy WS-64 system:
- Clean Filter Regularly: Periodically check and clean the water filter to prevent clogging and ensure consistent water flow.
- Inspect Tubing and Drippers: Check for any kinks, blockages, or leaks in the tubing and drippers. Clear any debris that may accumulate.
- Battery Replacement: If using AA batteries, replace them every 2-3 months or when the low battery indicator appears on the LCD screen.
- Winterization (if applicable): If storing the system in freezing temperatures, drain all water from the tubing and pump to prevent damage.
- Store Properly: When not in use for extended periods, clean all components and store them in a dry, cool place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow | Clogged filter or drippers; Kinked tubing; Empty water reservoir; Pump malfunction. | Clean filter and drippers; Straighten tubing; Refill water reservoir; Check pump connection. |
| Inconsistent watering | Partial clog in system; Low battery; Incorrect schedule setting. | Check and clear partial clogs; Replace batteries; Verify schedule settings. |
| Leaks in tubing | Loose connections; Damaged tubing; Improperly installed sealing end. | Ensure all connections are secure; Replace damaged tubing; Re-install sealing end cap. |
| Timer display not working | Dead batteries; No power from Type-C; Unit off. | Replace batteries; Check Type-C cable and power source; Turn unit on. |
Specifications
- Model Name: WS-64
- Brand: Raddy
- Material: Plastic
- Dimensions (L x W x H): 7.09 x 5.2 x 3.54 inches
- Item Weight: 1.76 pounds (0.8 Kilograms)
- Power Source: Battery Powered (4x AA) / Type-C
- Hose Length: 10 Meters (33 feet)
- Control Type: Button Control
- Special Features: Digital Timer, Automatic Watering, Programmable, IPX4 Waterproof
- Max Potted Plants Supported: 15
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Raddy website. Keep your purchase receipt for warranty claims.
Raddy Official Store: Visit the Raddy Store on Amazon
