MOKiN 8-in-1 USB C Docking Station
MOKiN USB C Docking Station 8-in-1 Dual DisplayPort Instruction Manual
Model: 8-in-1 USB C Docking Station
1. Introduction
This manual provides detailed instructions for the MOKiN 8-in-1 USB C Docking Station. This device expands the connectivity of your USB-C enabled laptop, offering multiple display outputs, USB data ports, and power delivery capabilities. Please read this manual thoroughly before use to ensure proper setup and operation.
2. Product Overview
The MOKiN 8-in-1 USB C Docking Station is designed to enhance your productivity by providing a comprehensive set of ports through a single USB-C connection to your host device.
2.1 Port Configuration
- 2 x DisplayPort (DP): Supports up to 4K@60Hz resolution each.
- 1 x HDMI: Supports up to 4K@60Hz resolution.
- 1 x VGA: Supports up to 1080P@60Hz resolution.
- 1 x USB C 2.0: Data transfer up to 480Mbps.
- 3 x USB A 2.0: Data transfer up to 480Mbps.
- 1 x PD Charging Port: Supports up to 100W Power Delivery for host device charging.

Image 2.1: Overview of the MOKiN 8-in-1 USB C Docking Station, illustrating its various input and output ports including DisplayPort, HDMI, VGA, USB-C, USB-A, and Power Delivery port.
3. Setup Instructions
3.1 Compatibility Check
Ensure your laptop's USB-C port supports DisplayPort Alternate Mode (Alt Mode), Power Delivery, and data transfer. Not all USB-C ports are full-featured.

Image 3.1: Visual guide for identifying compatible USB-C ports on your laptop. Look for ports supporting data transfer, display output, and charging.
3.2 Connecting the Docking Station
- Connect the integrated USB-C cable from the docking station to a compatible USB-C port on your laptop.
- For power delivery to your laptop, connect your laptop's original USB-C power adapter to the PD Charging Port on the docking station. The docking station supports up to 100W input, providing up to 87W for laptop charging (13W is reserved for the docking station's operation).
- Connect your external monitors to the available DisplayPort, HDMI, and/or VGA ports on the docking station.
- Connect any USB peripherals (keyboard, mouse, USB drives, etc.) to the USB A 2.0 or USB C 2.0 data ports.

Image 3.2: The MOKiN docking station with its integrated USB-C cable connected to a laptop, and various cables for external displays and USB devices.
4. Operating Instructions
4.1 Display Configuration
After connecting your monitors, your operating system should automatically detect them. You may need to adjust display settings within your OS.
4.1.1 Windows Laptops (DP 1.4)
Windows laptops typically support extended display modes across multiple monitors.
- Dual Monitors: HDMI + DP1 + DP2 (all 4K@60Hz).
- Triple Monitors: DP1 + DP2 + HDMI (e.g., DP1 4K@30Hz, HDMI 4K@60Hz, DP2 1080@60Hz).
- Quadruple Monitors: HDMI + DP1 + DP2 + VGA (e.g., VGA 1080P@60Hz, HDMI 1080P@60Hz, DP1 1080P@60Hz, DP2 1080P@60Hz).

Image 4.1: Examples of dual, triple, and quadruple monitor setups for Windows laptops, detailing resolution capabilities for each port.
4.1.2 macOS Laptops (DP 1.4 Protocol)
macOS devices typically support mirror mode across multiple external monitors. Extended mode for multiple distinct displays is generally not supported.
- Dual Monitors: HDMI + DP1 (both 4K@60Hz).
- Triple Monitors: DP1 + DP2 + HDMI (e.g., DP1 4K@30Hz, HDMI 4K@30Hz, DP2 4K@30Hz).

Image 4.2: Examples of dual and triple monitor setups for macOS laptops. Note that macOS typically mirrors content across external displays rather than extending it uniquely to each.
4.2 Data Transfer
The USB C 2.0 and USB A 2.0 ports allow for data transfer up to 480Mbps. These ports are suitable for connecting keyboards, mice, USB flash drives, and other compatible peripherals.

Image 4.3: Illustration of the docking station's USB ports being used for data transfer with various devices like a mouse, keyboard, and hard drive.
4.3 Power Delivery
The PD Charging Port supports a maximum input of 100W. This power is distributed, with approximately 13W used by the docking station itself and up to 87W delivered to the connected laptop for charging.

Image 4.4: Visual representation of the 100W power input to the docking station and the resulting 87W output for laptop charging.
5. Maintenance
- Keep the docking station clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Ensure proper ventilation around the docking station during operation to prevent overheating.
6. Troubleshooting
6.1 Common Issues and Solutions
- No Display Output:
- Ensure your laptop's USB-C port supports DisplayPort Alt Mode.
- Verify that all display cables are securely connected to both the docking station and the monitors.
- Try connecting one monitor at a time to isolate the issue.
- Restart your laptop.
- For macOS, remember that extended mode for multiple distinct external displays is not supported; monitors will mirror content.
- Laptop Not Charging:
- Ensure your laptop's USB-C port supports Power Delivery.
- Verify that your laptop's original power adapter is connected to the PD Charging Port on the docking station.
- Check if the power adapter is functioning correctly.
- Note that the docking station reserves 13W for its own operation, so the actual charging power to your laptop will be less than the input power (e.g., 87W output from 100W input).
- USB Devices Not Recognized or Slow Data Transfer:
- Ensure USB devices are properly inserted into the docking station's USB ports.
- Try connecting the USB device directly to your laptop to confirm functionality.
- The USB 2.0 ports offer speeds up to 480Mbps. For higher speeds, ensure your laptop and device support faster USB standards if connecting directly.
- Docking Station Overheating:
- Ensure the docking station is placed in a well-ventilated area.
- Avoid covering the device.
- If the device becomes excessively hot, disconnect it and allow it to cool down before resuming use.
- Laptop Screen Goes Black with Four Monitors:
- This is a known limitation. If you connect four monitors, the laptop's internal screen may turn off. This behavior is dependent on the host device's graphics capabilities and operating system.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | MOKiN |
| Model | 8-in-1 USB Hub |
| Hardware Interface | USB-C, DisplayPort, HDMI, VGA, USB 2.0 |
| Display Outputs | 2x DisplayPort (4K@60Hz), 1x HDMI (4K@60Hz), 1x VGA (1080P@60Hz) |
| USB Data Ports | 1x USB C 2.0 (480Mbps), 3x USB A 2.0 (480Mbps) |
| Power Delivery | Up to 100W input (87W output for charging) |
| Item Weight | 3.52 ounces |
| Package Dimensions | 8.07 x 2.6 x 0.75 inches |
| Special Feature | Fast Charging, Portable |
8. Warranty and Support
8.1 Warranty Information
The MOKiN 8-in-1 USB C Docking Station comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
8.2 Customer Support
If you encounter any issues or have questions regarding the use, setup, or functionality of your MOKiN docking station, please contact MOKiN customer support. Refer to the product packaging or the MOKiN official website for contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







