Introduction
This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Kalecope Shockwave Therapy Machine, model KPCH800. Please read this manual thoroughly before using the device to ensure proper usage and to maximize its benefits for muscle and joint pain relief.
Safety Information
WARNING: Always consult a healthcare professional before use. Do not use on broken skin or over cancerous lesions. Avoid use on the throat, eyes, or genitals. Keep the device dry and clean to prevent electrical shock. Do not use while sleeping or unconscious. Discontinue use if you experience pain or discomfort.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
What's in the Box
Verify that all components are present upon unpacking:
- 1 x Main Shockwave Therapy Machine
- 1 x Handpiece
- 5 x Working Heads (various sizes)
- 1 x Brush
- 1 x Tweezer
- 1 x Instruction Manual
- 2 x Handpiece Holders
- 2 x Replacement Bullets
- 1 x Power Cable
Product Features
- Efficient Pain Relief: Designed for rapid alleviation of joint and muscle pain, effective for sports-related muscle injuries.
- Stronger and More Stable Energy Output: Features a full metal case for consistent energy delivery, superior stability, and longevity.
- Versatile Treatment Modes: Includes 12 specific modes and 5 different emitters, offering therapeutic pressures up to 0.5-10 bar and a pulse frequency range of 1 to 22 Hz, with a penetration depth of up to 3 inches.
- Non-Invasive Treatment: Provides a safe and efficient treatment without anesthesia or surgery, improving blood circulation to activate cell tissue self-repair.
- Easy and Safe Operation: Equipped with a user-friendly HD touch screen with pre-set parameters for direct use.
Technical Specifications
| Specification | Detail |
|---|---|
| Model Number | KPCH800 |
| Voltage | AC110V/AC220V (automatic switch) |
| Frequency | 1-22 Hz |
| Power | 350W Max |
| Energy | 0.5-10.0 Bar |
| Working Heads | 5 pcs |
| Screen Size | 8 inch |
| Product Dimensions | 14 x 13.5 x 8.5 inches |
| Machine Weight | 38 Pounds |
Setup
- Unpack: Carefully remove all components from the packaging. Refer to the "What's in the Box" section to ensure all parts are present.
- Placement: Place the main machine on a stable, flat surface. Ensure adequate ventilation around the unit.
- Connect Handpiece: Connect the handpiece cable securely to the designated port on the main machine.
- Insert Working Head: Select the appropriate working head for your treatment area and securely attach it to the handpiece.
- Power Connection: Connect the power cable to the machine and then to a suitable electrical outlet.
- Power On: Turn on the main power switch, usually located at the back of the machine. The touch screen should illuminate.
Video: Overview of the Kalecope CH800 Shockwave Therapy Machine, demonstrating its components and basic setup. This video shows the machine's parts, assembly of the handpiece, and initial power-on sequence.
Operating Instructions
General Operation
- Power On: After connecting the power, turn on the main switch. The HD touch screen will display the main interface.
- Select Language: If necessary, navigate to 'Settings' to select your preferred language.
- Choose Treatment Area: On the main screen, select the specific body part you intend to treat (e.g., Waist, Shoulder, Knee Joints). The screen will display recommended settings for that area.
- Adjust Parameters: Adjust the 'Running count', 'Strength setting' (Bar), and 'Frequency setting' (Hz) as needed. Start with lower settings and gradually increase to a comfortable level.
- Apply Gel: Apply a conductive gel (not included) to the skin over the treatment area. This ensures optimal energy transmission.
- Begin Treatment: Press the 'Start' button on the screen or the trigger on the handpiece to begin the shockwave therapy.
- Move Handpiece: Gently move the handpiece in slow, circular motions over the treatment area.
- Monitor Progress: The screen will display the running time and count.
- Stop Treatment: Press the 'Stop' button on the screen or release the trigger on the handpiece to pause or end the treatment.
Image: Visual guide for operating the device, showing how to identify treatment areas, select settings on the touchscreen, apply gel, and use the handpiece.
Interchangeable Working Heads
The device comes with 5 interchangeable working heads, each designed for specific body parts and treatment depths:
- #1 (0.23 inch): Suitable for small areas like finger joints.
- #2 (0.4 inch) & #3 (0.59 inch): Suitable for treatment areas like elbows and Achilles tendons.
- #4 (0.79 inch): Suitable for treatment areas such as knees and soles of the feet.
- #5 (0.98 inch): Suitable for large muscle areas such as the waist, back, and shoulder.
Tip: These are suggestions only. Choose the working head that best suits your specific treatment needs and comfort.
Maintenance
- Cleaning: After each use, clean the handpiece and working heads with a soft, damp cloth. Ensure no gel residue remains. Do not use abrasive cleaners or immerse the device in water.
- Handpiece Care: Regularly inspect the handpiece for any signs of wear or damage. Ensure the bullet chamber is clean and free of debris. A small amount of sewing machine oil can be applied to the bullet and chamber for smooth operation.
- Condensation Drainage: Periodically drain any condensation from the compressor system as instructed in the detailed manual.
- Storage: Store the device and its accessories in a clean, dry place away from direct sunlight and extreme temperatures. Use the provided holders for the handpiece and working heads.
- Power Cable: Inspect the power cable for any damage before each use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Power cable not connected; Main switch off; Power outlet issue. | Ensure power cable is securely connected. Turn on the main power switch. Test the power outlet with another device. |
| Handpiece not generating shockwaves. | Handpiece not properly connected; Settings too low; Internal bullet issue. | Check handpiece connection. Increase strength and frequency settings. Ensure the internal bullet is correctly seated and not worn. Replace if necessary. |
| Screen unresponsive. | Temporary software glitch. | Turn off the device, wait 30 seconds, then power it back on. |
| Unusual noise during operation. | Internal component issue; Handpiece not assembled correctly. | Discontinue use and contact customer support. Re-check handpiece assembly. |
Warranty and Support
Your Kalecope Shockwave Therapy Machine is covered by a manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions.
For technical assistance, troubleshooting, or any questions regarding your device, please contact Kalecope customer support. We provide detailed user manuals and professional assistance whenever you need it.
Image: Kalecope offers 24/7 customer support and professional assistance.