1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your THOMSON QY-BG002 BB82532 Wall Art Wireless Bluetooth Speaker. Please read this manual thoroughly before using the product to ensure proper function and safety.
2. Product Overview
2.1 Key Features
- Wall-mounted design: Space-saving, stylish and functional, perfect for home or office setups.
- Bluetooth 5.2: Supports TWS (True Wireless Stereo) for dual speaker pairing, with a 10m Bluetooth range for easy wireless music playback.
- High and low-frequency speakers: Equipped with both high and low-frequency drivers, delivering richer sound quality, with 4*10W output.
- Long battery life: Built-in 6000mAh lithium battery for extended use, 10 hours playback, with convenient TYP-C charging.
2.2 Package Contents
Verify that all items are present in the package:
- THOMSON QY-BG002 BB82532 Wall Art Wireless Bluetooth Speaker
- USB Type-C Charging Cable
- User Manual
- Wall Mounting Hardware (screws, anchors)
2.3 Product Components
3. Setup
3.1 Charging the Speaker
Before initial use, fully charge the speaker. Connect the provided USB Type-C cable to the charging port on the bottom of the speaker (refer to Figure 4) and the other end to a compatible USB power adapter (not included).
A full charge provides approximately 10 hours of playback.
3.2 Wall Mounting
The speaker is designed for wall mounting. Use the integrated brackets on the back of the speaker (refer to Figure 3) with appropriate screws and wall anchors (included) for secure installation. Ensure the mounting surface can support the speaker's weight (approximately 5.95 lbs).
Caution: Improper installation may result in damage or injury. If unsure, consult a professional.
4. Operating Instructions
4.1 Power On/Off
- To power on: Press and hold the power button (located on the bottom panel, Figure 4) until the indicator light illuminates.
- To power off: Press and hold the power button again until the indicator light turns off.
4.2 Bluetooth Pairing (Single Speaker)
- Ensure the speaker is powered on and within 10 meters of your Bluetooth device.
- The speaker will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "THOMSON QY-BG002" from the list of devices.
- Once paired, the LED indicator will stop flashing and remain solid. You can now play audio through the speaker.
4.3 True Wireless Stereo (TWS) Pairing (Two Speakers)
To achieve a stereo sound experience, you can pair two THOMSON QY-BG002 speakers together.
- Ensure both speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be your primary speaker), double-press the power button. It will enter TWS pairing mode, indicated by a specific LED pattern (refer to product LED guide for details).
- The primary speaker will automatically search for the secondary speaker.
- Once connected, both speakers will indicate a successful TWS connection (e.g., solid LED on both, or a specific color).
- Now, connect your Bluetooth device to the primary speaker as described in Section 4.2. Audio will play in stereo through both speakers.
- To disconnect TWS: Double-press the power button on either speaker.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker using the provided USB Type-C cable. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far from device. | Ensure speaker is on and flashing LED. Turn Bluetooth on your device. Move device closer to speaker (within 10m). |
| No sound after pairing. | Volume too low; incorrect audio output selected on device. | Increase volume on both speaker and connected device. Check device's audio output settings. |
| TWS pairing fails. | Speakers already connected to another device; speakers too far apart. | Disconnect both speakers from any Bluetooth devices. Ensure speakers are close to each other during TWS pairing. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | QY-BG002 BB82532 |
| Speaker Type | Wall Mount |
| Compatible Devices | Desktop, Laptop, MP3 Player, Smartphone, Tablet, Television |
| Surround Sound Channel Configuration | 2.0 |
| Product Dimensions | 18.11"D x 1.85"W x 13"H |
| Item Weight | 5.95 Pounds |
| Is Waterproof | False |
| Warranty Type | Limited |
| Maximum Range (Bluetooth) | 10 Meters |
| Control Method | App, Touch |
| Wireless Communication Technology | Bluetooth |
| Speaker Size | 47 Millimeters |
| Power Source | Battery Powered |
| Audio Driver Type | Dynamic Driver |
| Battery Capacity | 6000 Milliamp Hours |
| Speaker Maximum Output Power | 180 Watts |
| Connectivity Technology | USB |
| Audio Output Mode | Stereo |
| Audio Material | PVC Plastic + MDF Board |
| BT IC | MVSILICON/BP1082 |
| BT Version | 5.2 |
| Frequency Response | 80HZ-20KHZ |
| Sensitivity | 500±50mV |
8. Safety Information
- Do not expose the speaker to water or moisture.
- Avoid extreme temperatures and direct sunlight.
- Do not attempt to disassemble or repair the speaker yourself. This will void the warranty.
- Keep out of reach of children and pets.
- Use only the specified charging cable.
9. Warranty and Support
The THOMSON QY-BG002 BB82532 speaker comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support or service inquiries, please contact THOMSON customer service through their official website or the contact information provided with your purchase.
