Graco TurboBooster 2.0 Backless Booster Car Seat

1. Introduction

This instruction manual provides important information for the correct installation, use, and maintenance of your Graco TurboBooster 2.0 Backless Booster Car Seat. This booster seat is designed to ensure your child's safety and comfort during vehicle travel. Please read this manual thoroughly before using the product and retain it for future reference.

The Graco TurboBooster 2.0 Backless Booster Car Seat, Hot Wheels Gamer, is suitable for children aged 4 to 10 years, weighing between 40 and 100 pounds, and with a height up to 57 inches. It is engineered with Graco ProtectPlus Engineering for rigorous crash protection.

2. Safety Information

Your child's safety is paramount. Adhere to all safety guidelines to ensure proper use of the booster seat.

• Graco ProtectPlus Engineered: This booster seat provides robust protection in frontal, rear, and rollover crashes.
• Safety Standards: The seat is engineered and crash tested to meet or exceed US standard FMVSS 213. It is rigorously crash tested to meet or exceed US safety standards.
• Child Requirements: A booster seat is no longer needed once the vehicle seat belt fits properly, typically when the child reaches 4 feet 9 inches tall and is between ages 8-12. Always check your local and state laws, as well as AAP and NHTSA recommendations, for car seat usage.
• Temperature Testing: The booster seat has undergone additional testing based on the New Car Assessment Program and for extreme car interior temperatures.
• No Latches: This model does not include latches. It is designed for use with the vehicle's lap and shoulder belt system.

Image: The Graco TurboBooster 2.0 highlighting its ProtectPlus Engineered safety features, indicating protection in frontal, rear, and rollover crashes.

3. Product Features

The Graco TurboBooster 2.0 offers several features designed for comfort and convenience:

• Adjustable Armrests: Height-adjustable armrests provide superior comfort for your child.
• Proper Seating Position: The booster seat helps position your growing child at the correct height for the vehicle's seat belt.
• Integrated Cup Holders: Equipped with hide-away cup holders to keep drinks and snacks within reach.
• Modern Design: Features unique modern design elements, including the Hot Wheels Gamer theme.

Image: A top-down view of the Graco TurboBooster 2.0 Hot Wheels Gamer backless booster car seat, showcasing its design and integrated cup holders.

Image: A diagram highlighting key features of the Graco TurboBooster 2.0, including the machine-washable seat pad, comfort for big kids, hideaway cup holders, and lap belt guides.

4. Setup and Installation

Proper installation is critical for your child's safety. Always refer to your vehicle owner's manual for specific instructions regarding child restraint installation.

1. Placement: Place the booster seat firmly on the vehicle's seat. Ensure it is positioned correctly and does not overhang the edge of the vehicle seat.
2. Child Positioning: Seat your child in the booster seat. Ensure their back is flat against the booster seat back and their bottom is fully on the seat.
3. Vehicle Seat Belt Routing: Guide the vehicle's lap and shoulder belt around your child and through the designated belt guides on the booster seat.
4. Lap Belt Fit: The lap belt must lie low across your child's hips, touching the tops of their thighs. It should not rest on their abdomen.
5. Shoulder Belt Fit: The shoulder belt must lie snugly across the center of your child's shoulder and chest. It should not touch their neck or fall off their shoulder. Adjust the vehicle's shoulder belt height if possible, or adjust the booster's armrests to achieve proper fit.
6. Tighten Belt: Pull the shoulder belt to remove any slack, ensuring a snug fit for both the lap and shoulder portions of the belt.

Image: A child seated in the Graco TurboBooster 2.0, demonstrating the correct positioning of the vehicle's lap and shoulder belt for optimal safety.

5. Operating Instructions

Once installed, using the Graco TurboBooster 2.0 is straightforward:

1. Secure Child: Ensure your child is seated correctly with their back against the booster seat.
2. Buckle Up: Guide the vehicle's lap and shoulder belt through the booster's belt guides and buckle it.
3. Check Fit: Always double-check that the lap belt is low on the hips and the shoulder belt is centered on the shoulder and chest. The belt should be snug, with no slack.
4. Cup Holders: Utilize the hide-away cup holders for beverages or small items. Push them in when not in use.

Image: A child happily seated in the Graco TurboBooster 2.0, demonstrating the use of the convenient hideaway cup holders.

6. Maintenance

Regular cleaning and maintenance will prolong the life of your booster seat.

• Seat Pad: The seat pad is machine-washable. Refer to the care label on the pad for specific washing instructions.
• Cleaning Agents: Do not use bleach to clean any part of the booster seat. Use mild soap and cool water for plastic and metal parts.
• Drying: Allow all components to air dry completely before reassembly or use.

7. Troubleshooting

If you encounter issues with your Graco TurboBooster 2.0, consider the following:

• Loose Seat Belt: Ensure the vehicle's lap and shoulder belt are routed correctly through the booster's guides and pulled snug. There should be no slack.
• Improper Belt Positioning: Re-check that the lap belt is low on the hips and the shoulder belt is centered on the shoulder and chest. Adjust the child's position or the vehicle's belt if necessary.
• Booster Instability: Ensure the booster seat is placed flat and securely on the vehicle's seat. It should not wobble or move excessively.
• Child Discomfort: Verify that the child meets the minimum weight and height requirements. Adjust armrests for comfort.

If problems persist, consult the full product manual or contact Graco customer support.

8. Specifications

9. Warranty and Support

For detailed warranty information, product registration, or customer support, please visit the official Graco website or contact their customer service department. Retain your proof of purchase for warranty claims.