Noaton AVC220 Cordless Wet and Dry Vacuum Cleaner User Manual

Introduction

The Noaton AVC220 is a versatile cordless wet and dry vacuum cleaner designed to simplify your floor cleaning routine. This 2-in-1 device vacuums and mops simultaneously, making it suitable for various hard floor surfaces such as vinyl, tiles, and sealed wood. Equipped with a self-cleaning function, HEPA filter, and a dual tank system, it ensures efficient and hygienic cleaning. This manual provides essential information for safe operation, maintenance, and troubleshooting to help you get the most out of your appliance.

Important Safety Instructions

• Read all instructions before using the appliance.
• Use only the charging adapter provided by the manufacturer.
• Do not immerse the appliance, charging station, or adapter in water or other liquids.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not vacuum flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Ensure the HEPA filter is correctly installed before operation.
• This appliance is for household use only.

Package Contents

Please check the package for the following items:

• Noaton AVC220 Cordless Wet and Dry Vacuum Cleaner
• Charging Station
• Power Adapter
• Cleaning Solution (500ml)
• Cleaning Brush
• Replacement Brush Roller (2x)
• Replacement HEPA Filter (2x)
• User Manual

Setup and First Use

1. Assembly

1. Attach the Handle: Insert the handle into the main body of the vacuum cleaner until it clicks securely into place.
2. Install the Clean Water Tank: Ensure the clean water tank is properly seated in its designated slot.
3. Install the Dirty Water Tank: Ensure the dirty water tank is properly seated in its designated slot.

2. Charging the Appliance

1. Place the charging station on a flat, stable surface near a power outlet.
2. Connect the power adapter to the charging station and plug it into a wall outlet.
3. Place the Noaton AVC220 onto the charging station. The LED display will indicate the charging status.
4. For first use, fully charge the appliance (approximately 4-5 hours) to ensure optimal battery performance.

Operation

1. Filling the Clean Water Tank

• Remove the clean water tank from the appliance.
• Open the tank cap and fill it with clean tap water. For enhanced cleaning and polishing, add the recommended amount of Noaton cleaning solution (provided). Do not exceed the MAX fill line.
• Close the cap securely and reinsert the tank into the appliance.

2. Powering On and Selecting Cleaning Modes

• Press the power button to turn on the appliance. The LED display will illuminate.
• The Noaton AVC220 offers multiple cleaning modes:
  • Low-Speed Suction Mode: For light dry debris.
  • High-Speed Suction Mode: For heavier dry debris.
  • Wet Cleaning Mode (Mopping Mode): For wet spills and mopping hard floors.
• Use the mode selection button to switch between cleaning modes. The LED display will show the active mode.
• The appliance provides voice announcements to guide you through mode selection and operational status.

3. Cleaning Performance

• The AVC220 is designed to handle various types of messes on hard floors, including liquids, crumbs, sauces, pet hair, and eggs.
• The motorized floor brush provides forward propulsion, making it easier to maneuver the vacuum.
• The dual tank system ensures that only clean water is used for mopping, while dirty water is collected separately.

Maintenance

1. Self-Cleaning Function

• After each use, place the vacuum cleaner back on the charging station.
• Press the self-cleaning button (refer to your device's specific button layout if not clearly marked on the display).
• The appliance will automatically clean the brush roller and internal pathways using clean water from the tank.
• Empty the dirty water tank after the self-cleaning cycle is complete.

2. Emptying the Dirty Water Tank

• Regularly empty the dirty water tank after each cleaning session or when the "dirty water tank full" indicator appears.
• Remove the dirty water tank from the appliance.
• Open the tank and dispose of the dirty water. The tank includes a small sieve to trap larger debris and hair.
• Rinse the tank thoroughly with clean water and allow it to air dry before reinserting.

3. Cleaning the Brush Roller

• Even with the self-cleaning function, it is recommended to periodically remove and manually clean the brush roller.
• Turn off the appliance and remove the brush cover.
• Remove the brush roller. Use the provided cleaning brush to remove any tangled hair or debris.
• Rinse the brush roller under running water and allow it to dry completely before reinstallation.

4. HEPA Filter Maintenance

• The HEPA filter captures fine dust particles and allergens. It should be cleaned regularly and replaced periodically (every 3-6 months, depending on usage).
• Remove the HEPA filter from its housing (usually located within the dirty water tank assembly).
• Tap the filter gently to remove loose dust. You can rinse it under cool running water, but ensure it is completely dry before reinstallation to prevent mold growth and damage to the vacuum.
• Replace with a new HEPA filter when necessary to maintain optimal suction and air filtration.

Troubleshooting

Specifications

Warranty and Support

Noaton products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included in your package or visit the official Noaton website. If you encounter any issues or require technical assistance, please contact Noaton customer support through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.