LOVENSE Solace Pro & Mission 2 Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your LOVENSE Solace Pro Automatic Male Masturbator and LOVENSE Mission 2 Dildo Machine. Please read this manual thoroughly before first use and retain it for future reference.

Package Contents:

• LOVENSE Solace Pro Automatic Male Masturbator
• LOVENSE Mission 2 Dildo Machine
• USB-C Charging Cable (for Solace Pro)
• User Manual (this document)

2. Safety Information

Before using the devices, please observe the following safety precautions:

• Cleaning: Always clean the devices thoroughly before and after each use with warm water and a mild, toy-safe soap. Ensure they are completely dry before storage.
• Lubrication: For optimal comfort and to prevent damage to the materials, use only water-based lubricants. Oil-based lubricants can degrade silicone and other materials. LOVENSE water-based lubricant is recommended.
• Charging: Use only the provided USB-C charging cable. Do not use the device while it is charging.
• Storage: Store the devices in a clean, dry place away from direct sunlight and extreme temperatures. Keep out of reach of children.
• Discontinue Use: If you experience any discomfort, irritation, or pain during use, discontinue immediately. Consult a healthcare professional if symptoms persist.
• Legal Disclaimer: Statements regarding these products have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

3. Setup and Charging

3.1 LOVENSE Solace Pro

1. Initial Charge: Before first use, fully charge the Solace Pro. Connect the USB-C charging cable to the device's charging port and plug the other end into a compatible USB power source. The charging indicator will show the charging status. A full charge takes approximately 2 hours and provides up to 14 hours of playtime.
2. Cleaning: Detach the inner sleeve cups and wash them thoroughly with warm water and toy-safe soap. Rinse completely and allow to air dry.
3. Assembly: Once dry, reinsert the inner sleeve cups into the main unit.

Figure 1: LOVENSE Solace Pro charging via USB-C. The image highlights its 14-hour playtime on a 2-hour charge, body-safe material, ease of use, and USB-C rechargeability.

3.2 LOVENSE Mission 2

The Mission 2 Dildo Machine typically comes pre-assembled. Ensure all components are securely attached. No charging is required for the dildo itself, as it is powered by the machine.

1. Cleaning: Wash the dildo attachment thoroughly with warm water and toy-safe soap. Rinse completely and allow to air dry.
2. Suction Base: For hands-free use, ensure the suction base is clean and dry. Press it firmly onto a smooth, clean, non-porous surface to secure it.

Figure 2: LOVENSE Mission 2 Dildo Machine demonstrating its 180-degree adjustable suction cup base for versatile positioning on smooth, clean surfaces.

4. Operating Instructions

4.1 LOVENSE Solace Pro Automatic Male Masturbator

The Solace Pro offers both automatic hands-free operation and manual use with detachable sleeves.

• Power On/Off: Press and hold the power button to turn the device on or off.
• Automatic Mode: Place the device on a stable surface using its 180° adjustable tabletop stand. Apply water-based lubricant to the inner sleeve. Adjust the speed and depth settings using the controls on the device. The Solace Pro can achieve up to 300 strokes per minute with a depth of up to 2.55 inches (65 mm).
• Manual Mode: The inner sleeve cups are individually detachable. Remove a sleeve for manual use, allowing for flexible control.
• App Control (AI Sync): For an immersive experience, connect the Solace Pro to the LOVENSE app via Bluetooth. The app allows for advanced control, custom patterns, and AI Sync features.

Figure 3: LOVENSE Solace Pro demonstrating its 2-in-1 functionality, allowing for hands-free automatic use with its 180-degree adjustable stand or manual use by detaching the inner sleeve.

Figure 4: LOVENSE Solace Pro illustrating its controls for customizing stroke speed and depth, capable of up to 300 strokes per minute and 2.55 inches (65 mm) of thrusting depth.

Figure 5: LOVENSE Solace Pro demonstrating its AI Sync support, connecting to a laptop and smartphone for an immersive and customizable experience.

4.2 LOVENSE Mission 2 Dildo Machine

The Mission 2 can be used hands-free with its suction base or held manually.

• Power On/Off: Press and hold the power button on the base to turn the device on or off.
• Hands-Free Use: Secure the suction base to a smooth, clean surface. Adjust the dildo's angle up to 180° for desired positioning. Apply water-based lubricant.
• Manual Use: Detach the dildo from the suction base for handheld operation.
• Vibration Control:
  • Button Control: Cycle through 3 levels and 4 patterns of vibration using the control buttons on the device.
  • Touch-Sense Technology: The device features Touch-Sense Technology, where vibrations intensify with deeper penetration. This mode offers 3 gears of vibration.
  • App Remote Control: Connect to the LOVENSE app for access to over 10,000 patterns and remote control capabilities.

Figure 6: LOVENSE Mission 2 Dildo Machine illustrating its versatility with both handheld and hands-free usage options, providing double the functionality.

Figure 7: LOVENSE Mission 2 Dildo Machine detailing its quiet operation (below 47 dB), extensive app remote control with over 10,000 patterns, button control with 3 levels and 4 patterns, and a touch-sense mode offering 3 gears of vibration.

Figure 8: LOVENSE Mission 2 Dildo Machine showcasing its Touch-Sense Technology, which increases vibration intensity as penetration depth increases.

5. Maintenance and Care

• Cleaning: Always clean both devices immediately after each use. Use warm water and a mild, toy-safe soap. For the Solace Pro, detach the inner sleeves for thorough cleaning. For the Mission 2, clean the dildo attachment and the base. Rinse all parts thoroughly to remove any soap residue.
• Drying: Allow all components to air dry completely before reassembly or storage. Avoid using abrasive cloths or harsh chemicals.
• Storage: Store the devices in a cool, dry, and dust-free environment, away from direct sunlight and extreme temperatures. Keep them separate from other toys made of different materials to prevent material degradation.
• Lubricant: Only use water-based lubricants with these devices. Oil-based lubricants, massage oils, or hand creams can damage the silicone and other materials, voiding any potential warranty.

6. Troubleshooting

7. Specifications

LOVENSE Solace Pro:

• Strokes per Minute: Up to 300
• Thrusting Depth: Up to 2.55 inches (65 mm)
• Battery Life: Up to 14 hours (on a single charge)
• Charging Time: Approximately 2 hours
• Charging Type: USB-C Rechargeable
• Material: Body-safe materials
• Features: 180° adjustable tabletop stand, detachable inner sleeves, AI Sync supported.

LOVENSE Mission 2:

• Noise Level: ≤ 47 dB
• Vibration Patterns (App): 10,000+
• Vibration Patterns (Button): 4 patterns, 3 levels
• Touch-Sense Mode: 3 gears of vibration
• Adjustability: 180° adjustable suction cup
• Features: Strong suction base, flexible tip for G-spot targeting, Touch-Sense Technology.

8. Warranty and Support

LOVENSE products are manufactured to high-quality standards. For warranty information, product support, or to report any issues, please contact LOVENSE customer service directly. Keep your proof of purchase for warranty claims.

You can typically find support contact information on the official LOVENSE website or through the retailer where you purchased the product.