Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Tribesigns HOGA-NY248 2-Tier Round Coffee Table. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
Image: The Tribesigns HOGA-NY248 2-Tier Round Coffee Table, featuring a brown wood finish and a white accent on the top tier, positioned in a modern living room.
Safety Information
- Always assemble with at least two people to prevent injury and ensure proper construction.
- Do not exceed the maximum weight limit of 150 pounds (68 kg) on the tabletop or lower shelf. Overloading can cause structural damage or collapse.
- Secure the table to the wall or floor if there is any risk of tipping, especially in households with children or pets. Anti-tip hardware may be required (not included).
- Keep small parts and packaging materials away from children to avoid choking hazards.
- Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as needed.
- Avoid placing hot items directly on the tabletop without protective coasters.
- Do not stand or sit on the table.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Round Tabletop (1)
- Lower Storage Shelf (1)
- L-shaped Legs (4)
- Assembly Hardware (screws, dowels, etc.)
- Installation Tool (Allen wrench)
- Assembly Guide (This manual)
Assembly Instructions
Assembly requires two people. Follow these steps carefully:
Image: A visual guide demonstrating the four steps for assembling the Tribesigns coffee table, showing how the legs connect to the lower shelf and then to the tabletop.
- Step 1: Attach Legs to Lower Shelf. Insert the L-shaped legs into the designated slots on the lower storage shelf. Secure with the provided hardware.
- Step 2: Connect Legs to Tabletop. Carefully align the top of the assembled legs with the underside of the main tabletop. Secure the legs to the tabletop using the appropriate screws.
- Step 3: Final Tightening. Once all components are loosely connected, gently place the table upright. With assistance, ensure the table is stable and then fully tighten all screws. Do not overtighten.
- Step 4: Inspection. Verify that the table is stable and all connections are secure before placing any items on it.
For visual assistance, refer to the assembly diagram provided in the package or the image above.
Operating Instructions
Your Tribesigns coffee table is designed for versatile use in your living space.
- Top Surface: Use the main tabletop for placing beverages, books, decorative items, or for serving snacks. The two-tone finish with a faux marble veneer provides a stylish and durable surface.
- Lower Shelf: Utilize the lower tier for additional storage or display. It is ideal for magazines, remote controls, small baskets, or other living room essentials, helping to keep your space organized.
- Weight Distribution: Distribute weight evenly across both tiers to maintain stability and prevent stress on any single point.
Image: The coffee table showcasing its two-tier design, with decorative items on the top and books on the lower shelf, demonstrating its storage and display capabilities.
Maintenance
Proper care will extend the life and appearance of your coffee table.
- Cleaning: Wipe with a dry cloth. For spills, immediately wipe with a slightly damp cloth and then dry thoroughly. Avoid abrasive cleaners or harsh chemicals that can damage the finish.
- Protection: Use coasters under drinks and placemats under hot dishes to protect the tabletop from heat and moisture rings.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
- Regular Checks: Periodically check all hardware connections and tighten any loose screws to maintain structural integrity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Loose screws or uneven floor. | Ensure all screws are tightened. Adjust foot pads if present, or place shims under legs on uneven surfaces. |
| Parts do not align during assembly. | Incorrect orientation of parts or manufacturing defect. | Review assembly steps and diagrams carefully. If parts are still misaligned, contact customer support. |
| Scratches or damage to surface. | Impact or abrasive contact. | Use furniture polish or repair kits for minor scratches. Prevent future damage by using coasters and avoiding sharp objects. |
Specifications
Image: A detailed diagram illustrating the dimensions of the Tribesigns HOGA-NY248 coffee table, including overall diameter, height, and shelf spacing.
- Model: HOGA-NY248
- Brand: Tribesigns
- Material: MDF (Medium-Density Fiberboard)
- Color: White + Brown
- Product Dimensions (D x W x H): 31.5" x 31.5" x 17.7" (80 cm x 80 cm x 45 cm)
- Tabletop Thickness: 1.57" (4 cm)
- Item Weight: 34 Pounds (15.4 kg)
- Maximum Weight Recommendation: 150 Pounds (68 kg)
- Number of Tiers: 2
- Assembly Required: Yes (Recommended 2 people)
- Included Components: Assembly Guide, Installation Tool
- Care Instructions: Wipe with Dry Cloth
Image: An infographic comparing the properties of Exterior Grade MDF, used in this table, with Regular MDF, highlighting its higher density, strength, durability, load-bearing capacity, and moisture resistance.
Warranty and Support
Tribesigns is committed to providing high-quality products. For any questions, concerns, or issues regarding your coffee table, please contact Tribesigns customer support. Please have your model number (HOGA-NY248) and purchase information ready when contacting support.
For more information or to register your product, visit the official Tribesigns website: Tribesigns Store
