1. Introduction
This manual provides detailed instructions for the safe and effective use of your EVFOFO MZ05 7-Color LED Face Mask. Please read this manual thoroughly before operating the device and retain it for future reference.
The EVFOFO MZ05 LED Face Mask is designed for at-home light therapy, offering seven distinct light colors to address various skin concerns. Its comfortable, wireless design allows for convenient use.
2. Product Overview
2.1 Key Features
- 7 LED Colors: Provides a range of light wavelengths for different skin benefits.
- Comfortable Silicone Material: Ensures a snug and comfortable fit during use.
- Wireless Operation: Allows freedom of movement during therapy sessions.
- One-Button Control: Simplifies power on/off and color selection.
- Type-C Charging: Convenient and versatile charging interface.
- Soft Eye Pads: Designed to protect the eyes from direct light exposure.
- Adjustable Strap: For a personalized and secure fit.
- 240 High-Quality LEDs: Ensures comprehensive light coverage.
- Long Battery Life: Approximately 2 hours of use per full charge.
2.2 Components
The EVFOFO MZ05 LED Face Mask package includes:
- EVFOFO MZ05 LED Face Mask
- USB Type-C Charging Cable
- User Manual

Image: The EVFOFO MZ05 LED Face Mask, showcasing its design and the red light in use.

Image: Visual representation of the mask's key features including 7 LED colors, silicone material, wireless design, soft eye pads, adjustable strap, and 240 LEDs.
3. Safety Information
Please observe the following safety precautions to ensure proper operation and prevent injury or damage to the device:
- Do not use if you are pregnant, breastfeeding, or have epilepsy.
- Consult a physician before use if you have any pre-existing medical conditions, are taking photosensitizing medications, or have sensitive skin.
- Avoid direct eye contact with the LED lights. Always use the provided eye protectors.
- Keep out of reach of children.
- Do not immerse the device in water or use it in wet environments.
- Discontinue use if you experience any discomfort, irritation, or adverse reactions.
- Use only the provided charging cable.
4. Setup
Before your first use, ensure the device is fully charged.
- Charge the Mask: Connect the USB Type-C charging cable to the mask's charging port and a suitable power source. The indicator light will show charging status. A full charge provides approximately 2 hours of use.
- Install Eye Protectors: Insert the two silicone eye protectors into their designated slots on the inside of the mask. These are crucial for eye safety.
- Adjust Strap: Attach and adjust the head strap to ensure a comfortable and secure fit on your face. The mask should feel snug but not tight.

Image: Close-up view of the Type-C charging port and the single control button on the mask.
5. Operating Instructions
5.1 Usage Steps
Follow these steps for an optimal light therapy session:
- Prepare Your Skin: Cleanse your face thoroughly and apply a light serum if desired.
- Wear the Mask: Place the mask on your face, ensuring the eye protectors are correctly positioned and the strap is comfortably adjusted.
- Power On and Select Color: Long press the control button located on the top of the mask to turn it on. Tap the button repeatedly to cycle through the 7 available light colors.
- Begin Therapy: Lie down or relax in a comfortable position with your eyes closed. Enjoy the light therapy for approximately 15 minutes per session.
- Post-Therapy Care: After the session, remove the mask and apply your preferred moisturizer to your skin.

Image: A visual guide illustrating the five easy steps for using the EVFOFO LED Face Mask, from skin preparation to post-therapy moisturizing.
5.2 Light Color Functions
The EVFOFO MZ05 offers 7 distinct light colors, each with specific properties:
| Color | Wavelength | Primary Function |
|---|---|---|
| Red Light | 630nm | Supports skin rejuvenation, reduces appearance of fine lines. |
| Yellow Light | 590nm | Aids in improving skin tone and reducing redness. |
| Green Light | 520nm | Helps balance skin tone and calm the skin. |
| Blue Light | 470nm | Assists in managing oily skin and promoting clarity. |
| Bluish Light (Cyan) | Mixed | Combines benefits of green and blue light. |
| Purple Light | Mixed | Combines benefits of red and blue light. |
| White Light | Mixed | Full spectrum light, supports overall skin health. |

Image: Diagram illustrating the 7 different light colors (Red, Yellow, Green, Blue, Bluish, Purple, White) and their respective wavelengths or mixed light properties.
6. Maintenance
6.1 Cleaning
- After each use, gently wipe the mask with a soft, damp cloth.
- Do not use abrasive cleaners, alcohol, or harsh chemicals, as these can damage the device.
- Ensure the mask is completely dry before storing or recharging.
6.2 Storage
- Store the mask in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the mask in its original packaging or a protective case to prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mask does not turn on. | Low battery or not charged. | Charge the mask fully using the provided Type-C cable. Ensure the charging cable is securely connected. |
| Lights are dim or flickering. | Low battery. | Recharge the mask. |
| Cannot change light color. | Button not pressed correctly. | Ensure the mask is on, then tap the control button firmly to cycle through colors. |
| Discomfort during use. | Strap too tight or eye protectors misplaced. | Adjust the strap for a looser fit. Reposition the eye protectors to ensure they are covering your eyes properly. Discontinue use if discomfort persists. |
8. Specifications
- Model: MZ05
- Brand: EVFOFO
- Material: Silicone
- Number of LEDs: 240
- Light Colors: 7 (Red, Yellow, Green, Blue, Bluish, Purple, White)
- Battery: 1 Lithium Ion battery (included)
- Charging Interface: USB Type-C
- UPC: 725086516855
- Manufacturer: Shenzhen Liyoutong Technology Co., Ltd.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact EVFOFO customer service through the retailer where the product was purchased. Please have your model number (MZ05) and UPC (725086516855) available when contacting support.