usogood TC30 4K 36MP Trail Camera User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your usogood TC30 4K 36MP Trail Camera. Please read this manual thoroughly before using the camera to ensure optimal performance and longevity.

Package Contents

• usogood TC30 Trail Camera
• 8 x AA Batteries
• 32GB SD Card
• Mounting Strap
• USB Cable
• User Manual

Image: The usogood TC30 Trail Camera, 8 AA batteries, and a 32GB SD card.

Product Overview

The usogood TC30 Trail Camera is designed for wildlife monitoring and outdoor security. It features a robust, waterproof casing and advanced imaging capabilities.

Key Components:

• Main Lens: Captures 4K video and 36MP photos.
• PIR Sensors: Detect motion with a 120° wide detection angle.
• IR LEDs (36pcs 850nm): Provide enhanced night vision up to 65ft.
• 2.0” LCD Screen: For menu navigation and footage preview.
• Control Buttons: MENU, UP, DOWN, OK, MODE.
• Battery Compartment: Holds 8 AA batteries.
• SD Card Slot: Supports up to 128GB SD cards.
• Mounting Points: For strap and tripod.
• Waterproof Latch: Secures the camera for outdoor use.

Image: Front view of the usogood TC30 Trail Camera, showing the lens, IR lights, and motion sensors.

Setup

1. Battery Installation

1. Open the camera's side latches and swing open the front cover.
2. Locate the battery compartment at the bottom of the camera.
3. Insert 8 AA batteries, ensuring correct polarity (+/-) as indicated. The camera can operate with only 4 batteries in one side, but 8 are recommended for extended use.
4. Close the battery compartment securely.

Image: Battery installation diagram for the TC30 camera.

2. SD Card Installation

1. With the camera open, locate the SD card slot on the side.
2. Insert the provided 32GB SD card (or your own, up to 128GB) into the slot until it clicks into place.
3. It is recommended to format the SD card before first use via the camera's menu.

Image: Inserting the SD card into the camera.

3. Mounting the Camera

The camera can be mounted using the included strap or a standard tripod mount.

• Strap Mounting: Thread the provided strap through the slots on the back of the camera and secure it around a tree or post.
• Tripod Mounting: Use the 1/4"-20 threaded insert at the bottom of the camera to attach it to a tripod or compatible mounting bracket.

Image: Securing the camera to a tree using the mounting strap.

Operating Instructions

Power Modes

The camera has three power modes controlled by a switch inside the casing:

• OFF: Camera is powered off.
• TEST: Allows access to the menu, settings, and manual photo/video capture. The LCD screen is active in this mode.
• ON: Camera is in active monitoring mode. The LCD screen turns off, and the camera will capture photos/videos based on motion detection.

Menu Navigation and Settings

In TEST mode, use the control buttons to navigate and adjust settings:

• MENU: Enters/exits the main menu.
• UP/DOWN: Navigates through menu options.
• OK: Confirms selection or enters sub-menus.
• MODE: Switches between Photo, Video, and Photo+Video capture modes.

Setting Date and Time: Access this option in the menu to ensure accurate timestamps on your recordings.

Capture Modes

• Photo Mode: Captures still images when motion is detected.
• Video Mode: Records video clips when motion is detected.
• Photo+Video Mode: Captures a still image followed by a video clip.

Sensitivity Settings

Adjust the PIR sensor sensitivity (Low, Medium, High) in the menu to prevent false triggers from small movements like swaying branches or to ensure capture of smaller animals.

Viewing and Deleting Footage

In TEST mode, you can review captured photos and videos directly on the LCD screen. You can also delete unwanted files from the SD card through the menu.

Image: Reviewing footage on a computer after transferring the SD card.

Features

• High Resolution: Captures 36MP photos and 4K 30fps video for clear and detailed footage.
• Fast Trigger Speed: A rapid 0.3-second trigger ensures minimal delay in capturing motion.
• Wide Detection Angle: 120° PIR detection angle covers a broad area.
• Advanced Night Vision: Equipped with 36pcs 850nm IR LEDs for clear night vision up to 65ft without startling animals.
• Durable & Waterproof: IP66 rated housing protects against rain, snow, and extreme temperatures.
• Extended Standby Time: Optimized power consumption with 8 AA batteries for long operational periods.
• Loop Recording: Automatically overwrites the oldest files when the SD card is full, ensuring continuous recording.

Image: Example of 4K 30fps video quality capturing wildlife.

Image: Comparison of night vision clarity, highlighting the TC30's performance.

Image: The camera's IP66 waterproof design in a rainy environment.

Maintenance

• Cleaning: Regularly wipe the camera lens and PIR sensors with a soft, dry cloth to ensure clear images and proper motion detection.
• Battery Replacement: Replace all 8 AA batteries when the low battery indicator appears on the screen or when performance degrades.
• SD Card Management: Periodically review and back up your footage. Format the SD card every few months or after significant use to maintain optimal performance and prevent data corruption.
• Storage: When not in use for extended periods, remove batteries and the SD card, and store the camera in a cool, dry place.

Troubleshooting

Specifications

Warranty & Support

The usogood TC30 Trail Camera comes with a 2-year warranty. For any issues or support inquiries, please contact our customer service team. We aim to resolve any concerns within 48 hours.

Email: support@usogood.co