1. Introduction
This manual provides essential information for the Jada Toys Fast & Furious 1:24 Scale Die-Cast 2007 Porsche 911 GT3 model. This 1:24 scale replica is designed for display and light interaction, featuring details inspired by the vehicle seen in Fast X. Please read these instructions carefully to ensure proper handling and longevity of your model.
2. Product Features
- Authentic 1:24 scale replica of the 2007 Porsche 911 GT3, officially licensed.
- Constructed from durable die-cast metal with a high-gloss finish.
- Equipped with rubber tires for a realistic appearance.
- Features opening doors, a detailed interior, and an opening hood/engine compartment.
- Designed for collectors and enthusiasts.
Image 2.1: Front-left view of the Jada Toys 2007 Porsche 911 GT3 die-cast model with the hood and both doors open, showcasing the detailed engine and interior.
3. Setup
3.1 Unboxing
Carefully remove the model from its collector-grade packaging. Retain packaging for future storage or display if desired.
3.2 Placement
Place the model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to prevent damage or fading.
Image 3.1: Front-left view of the Jada Toys 2007 Porsche 911 GT3 die-cast model in green.
4. Operating the Model
4.1 Opening Doors
Gently open the driver and passenger doors by pulling them outwards. Avoid excessive force to prevent damage to hinges.
4.2 Opening Hood and Engine Compartment
The front hood and rear engine cover can be opened to reveal interior details. Use care when opening and closing these parts.
4.3 Steering
The front wheels may have limited steering capability. Avoid forcing the wheels beyond their natural range of motion.
4.4 Rolling
The model features functional rolling wheels with rubber tires. It is designed for display and gentle movement, not for high-impact play.
Image 4.1: Front view of the Jada Toys 2007 Porsche 911 GT3 die-cast model with the hood and driver's side door open, revealing interior details.
5. Maintenance
5.1 Cleaning
Use a soft, dry cloth to gently wipe dust from the model. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
5.2 Storage
When not on display, store the model in its original packaging or a protective case to prevent dust accumulation and accidental damage.
5.3 Handling
Always handle the model by its body, avoiding delicate parts like mirrors, spoilers, or antennas.
6. Troubleshooting
6.1 Stiff Moving Parts
If doors or the hood feel stiff, gently work them open and closed a few times. Do not apply lubricants.
6.2 Loose Parts
Small parts may become loose over time. If a part detaches, it may be reattached with a small amount of model-safe adhesive, if appropriate.
6.3 Paint Chipping
Avoid impacts or rubbing against rough surfaces to prevent paint chipping.
7. Specifications
| Model Number | 34919 |
| Scale | 1:24 |
| Product Dimensions | 8.5 x 3.63 x 2.5 inches (Length x Width x Height) |
| Item Weight | 1.28 pounds |
| Material | Die-cast metal with rubber tires |
| Recommended Age | 8 - 12 years |
| Release Date | December 11, 2024 |
| Manufacturer | Jada Toys |
Image 7.1: Side view of the Jada Toys 2007 Porsche 911 GT3 die-cast model next to a ruler, illustrating its 1:24 scale dimensions.
8. Warranty Information
This product is covered by the standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase. For specific warranty details, refer to the product packaging or contact Jada Toys customer support.
9. Customer Support
For assistance with your Jada Toys product, please visit the official Jada Toys website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
