Axial SCX24 Base Camp 4x4 Rock Crawler (AXI-1219T1) Instruction Manual

1. Safety Information

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property, and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation, and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

2. What's in the Box

Upon unpacking, verify that all components listed below are present:

• 1/24 SCX24 Base Camp 4x4 Rock Crawler Brushed RTR - White
• (1) Spektrum SLT2 2.4GHz Transmitter
• (1) Spektrum 10A Brushed ESC / SLT Receiver Combo
• (1) Spektrum 350mAh LiPo Battery and USB Charger
• (1) Dynamite 88T Brushed Motor
• (1) Axial AS-1 Micro Servo
• Product Manual

Image: The Axial SCX24 Base Camp 4x4 Rock Crawler shown with its included Spektrum 350mAh LiPo battery and USB charger.

3. Setup

3.1 Charging the Battery

1. Connect the included Spektrum 350mAh LiPo battery to the USB charger.
2. Plug the USB charger into a compatible USB power source (e.g., computer, USB wall adapter).
3. The charger's LED indicator will show the charging status. Refer to the charger's specific instructions for LED indications.
4. Once fully charged, disconnect the battery from the charger.

3.2 Installing the Battery

1. Carefully remove the body clips or unlatch the body of the rock crawler to access the chassis.
2. Locate the battery tray on the chassis.
3. Place the charged LiPo battery into the battery tray.
4. Secure the battery using the provided strap or retainer.
5. Connect the battery to the ESC/Receiver combo. Ensure correct polarity.
6. Reattach the body of the rock crawler.

3.3 Transmitter Preparation

Image: The Spektrum SLT2 2.4GHz Transmitter.

1. Install 4 AA batteries (not included) into the Spektrum SLT2 2.4GHz Transmitter.
2. Ensure the transmitter is powered off before proceeding.

4. Operating Instructions

4.1 Powering On

1. Turn on the transmitter first.
2. Then, turn on the rock crawler by pressing the power button on the ESC/Receiver.
3. Wait for the system to bind (LEDs will indicate successful binding).

4.2 Basic Controls

• Steering Wheel: Turn left or right to control the direction of the front wheels.
• Throttle Trigger: Pull to move forward, push to brake/reverse.
• Trim Dials: Adjust steering and throttle trim for straight tracking and neutral throttle.

Image: The Axial SCX24 Base Camp 4x4 Rock Crawler demonstrating its off-road capability.

4.3 Driving Tips

• Start slowly to get accustomed to the controls.
• Practice steering and throttle control in open areas before attempting challenging terrain.
• The 4x4 system and high-grip tires are designed for rock crawling and uneven surfaces.

5. Maintenance

5.1 General Cleaning

• After each use, clean dirt and debris from the chassis, suspension, and drivetrain using a soft brush or compressed air.
• Avoid using water directly on electronic components.

5.2 Inspection

• Regularly check for loose screws, damaged parts, or worn tires.
• Inspect the motor and servo for any signs of wear or damage.

Image: Underside view of the Axial SCX24 Base Camp chassis, showing the drivetrain and suspension components.

5.3 Battery Care

• Always store LiPo batteries in a cool, dry place, away from direct sunlight and heat.
• Do not overcharge or over-discharge the battery.
• If the battery shows signs of swelling or damage, discontinue use immediately and dispose of it properly.

6. Troubleshooting

• Vehicle not responding: Ensure both the transmitter and vehicle are powered on and the battery is charged. Re-bind the transmitter and receiver if necessary.
• Poor performance: Check for debris in the drivetrain, ensure all wheels spin freely, and verify battery charge.
• Steering issues: Adjust the steering trim on the transmitter. Inspect the servo and steering linkages for damage.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or replacement parts, please refer to the official Axial or Horizon Hobby website. Keep your proof of purchase for warranty claims.

Online Resources:

• Axial Racing Official Website
• Horizon Hobby Official Website