JOYMOR B0DM25SBK4
JOYMOR Pretend Hospital Kids Doctor Kit User Manual
Model: B0DM25SBK4
Introduction
Thank you for choosing the JOYMOR Pretend Hospital Kids Doctor Kit. This wooden play set is designed to provide an engaging and educational experience for toddlers and preschoolers, encouraging imaginative role-play and fostering an understanding of healthcare. This manual provides essential information for assembly, operation, maintenance, and care of your new doctor play set.

Package Contents
Please verify that all components listed below are present in your package before beginning assembly:
- 1 x Kids Doctors Play Set (Main Hospital Structure and Examination Table)
- 1 x Tool Kits (Assorted Medical Toy Accessories)
- 1 x Instruction Manual (This document)

Setup Instructions
Follow these steps to assemble your JOYMOR Pretend Hospital Kids Doctor Kit. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging and lay them out. Identify each piece by comparing it with the parts list or diagrams in the included instruction sheet.
- Assemble Main Hospital Structure: Begin by connecting the side panels to the back panel of the hospital unit. Ensure all connections are secure.
- Attach Shelves: Insert the shelves into the designated slots within the hospital structure.
- Assemble Examination Table: Connect the legs to the tabletop of the examination table. Secure any lower shelves or storage compartments.
- Connect Units: If applicable, connect the examination table to the main hospital structure using the provided connectors or bridge piece.
- Install Accessories: Place the eye chart, IV stand, and other larger accessories in their designated positions.
- Organize Tools: Arrange the smaller medical toy accessories on the shelves and in the storage areas.

Operating Instructions
The JOYMOR Pretend Hospital Kids Doctor Kit is designed for imaginative play. Here are some ways to utilize its features:
- Patient Check-ups: Use the examination table for pretend patient check-ups. Utilize the stethoscope to listen to heartbeats, the thermometer to check temperature, and the blood pressure cuff to monitor vitals.
- Eye Chart Practice: Have children read the eye chart to practice their letters and numbers, simulating an eye exam.
- Administering Medicine: Use the pill bottles and packs for pretend medication administration. The syringe can be used for mock injections.
- Surgical Play: The scalpel and scissors can be used for safe, pretend surgical procedures on toy patients.
- IV Drip Simulation: The IV stand and bag allow for realistic simulation of intravenous fluid administration.
- Record Keeping: Use the medical card and clipboard to record patient information and treatment plans.


Maintenance and Care
To ensure the longevity and safety of your JOYMOR Pretend Hospital Kids Doctor Kit, please follow these maintenance guidelines:
- Cleaning: Wipe down all wooden and plastic surfaces with a soft, damp cloth. Use mild soap if necessary, but avoid harsh chemicals or abrasive cleaners. Ensure all parts are completely dry before storage.
- Storage: Store the play set in a dry, cool place away from direct sunlight and extreme temperatures. Proper storage helps prevent warping or damage to the wooden components.
- Inspection: Periodically inspect all parts for any signs of wear, damage, or loose connections. Tighten any loose screws or fasteners as needed. Discontinue use if any part is broken or damaged.
- Avoid Water Immersion: Do not immerse any wooden parts in water, as this can cause swelling, cracking, or mold growth.
Troubleshooting
If you encounter any issues with your JOYMOR Pretend Hospital Kids Doctor Kit, please refer to the following common solutions:
- Issue: Parts do not fit together during assembly.
Solution: Ensure you are using the correct parts as per the assembly diagram. Sometimes, parts may need to be rotated or aligned precisely. Do not force components together. - Issue: The set feels wobbly after assembly.
Solution: Check all screws and fasteners to ensure they are tightened securely. Make sure the set is placed on a flat, even surface. - Issue: Wooden parts appear discolored or damaged.
Solution: This may be due to exposure to moisture or extreme temperatures. Ensure proper storage conditions. If damage is significant, contact customer support for replacement parts. - Issue: Missing accessories.
Solution: Double-check the packaging and surrounding area. If still missing, refer to the warranty and support section to contact customer service.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 26.77 x 34.65 x 39.84 inches (L x W x H) |
| Item Weight | 29.1 pounds |
| Recommended Age | 3 years and up |
| Material | High-quality, sustainable wood |
| Model Number (ASIN) | B0DM25SBK4 |
| Manufacturer | JOYMOR |

Safety Information
This product is designed with safety in mind. Please note the following:
- No specific warnings applicable beyond general toy safety.
- Adult supervision is recommended during play, especially for younger children.
- Keep small parts away from children under 3 years of age to prevent choking hazards.
Warranty and Support
JOYMOR stands behind the quality of its products. This product comes with a standard manufacturer's warranty covering defects in materials and workmanship under normal use. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact customer support.
For technical support, missing parts, or warranty claims, please contact JOYMOR customer service through the retailer where the product was purchased or visit the official JOYMOR website for contact information.