1. Introduction
This manual provides essential information for the safe and effective use of your FLEXISPOT 40-inch Standing Desk Converter. Please read these instructions thoroughly before assembly and operation, and retain them for future reference.
Image 1.1: The FLEXISPOT 40-inch Standing Desk Converter in a typical workstation environment.
2. Safety Information
Always ensure your existing desk is stable and sturdy enough to support the weight of the converter and its contents. Follow the assembly instructions carefully to avoid injury. Do not use the converter if your desk wobbles or feels unstable.
- Do not overload the desk converter. Refer to the 'Specifications' section for maximum weight capacities.
- Keep hands and fingers clear of moving parts during height adjustment.
- Ensure all connections are secure before placing equipment on the desk.
- Place the converter on a flat, stable surface.
3. Package Contents
Verify that all components are present before beginning assembly:
- Main Desk Converter Unit (pre-assembled frame and upper desktop)
- Keyboard Tray
- Assembly Hardware (screws, tools if included)
- Instruction Manual
4. Setup and Assembly
The FLEXISPOT Standing Desk Converter is designed for quick and straightforward assembly. The main unit comes largely pre-assembled.
4.1 Attaching the Keyboard Tray
- Carefully remove the main desk converter unit from its packaging and place it on your existing desk.
- Locate the keyboard tray and the designated attachment points on the underside of the main unit.
- Align the keyboard tray with the attachment points.
- Secure the keyboard tray using the provided screws and tools. Ensure it is firmly attached and stable.
Once the keyboard tray is attached, your desk converter is ready for use.
Image 4.1: The keyboard tray provides a dedicated area for input devices.
5. Operating Instructions
5.1 Height Adjustment
The desk converter features a quick-adjust mechanism for seamless transitions between sitting and standing positions. The versatile height range is 4.7 to 16.6 inches.
- To raise the desk: Locate the adjustment lever, typically on the side of the upper desktop. Squeeze the lever and gently lift the desktop to your desired standing height. Release the lever to lock it in place.
- To lower the desk: Squeeze the adjustment lever and gently push the desktop down to your desired sitting height. Release the lever to lock it in place.
Ensure all items on the desk are stable before adjusting the height.
Image 5.1: Visual representation of the height adjustment mechanism and range.
5.2 Workspace Utilization
The converter features a spacious two-tier design:
- Upper Desktop: Comfortably accommodates monitors or laptops. The unique U-shaped design allows for direct laptop placement on the keyboard tray while still providing space for monitors above.
- Keyboard Tray: Provides a dedicated area for your keyboard and mouse, promoting ergonomic wrist positioning.
Image 5.2: Overhead view demonstrating the spacious two-tier desktop layout.
6. Maintenance
To ensure the longevity and optimal performance of your desk converter, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Inspection: Periodically check all screws and connections to ensure they are tight. Tighten if necessary.
- Moving Parts: The hydraulic system is designed for maintenance-free operation. Do not attempt to lubricate or disassemble it.
7. Troubleshooting
If you encounter any issues with your desk converter, refer to the following common solutions:
- Difficulty Adjusting Height: Ensure the adjustment lever is fully engaged. Check for any obstructions beneath the desk converter. If the issue persists, verify that the weight on the desktop does not exceed the maximum capacity.
- Wobbling or Instability: Confirm that the desk converter is placed on a flat, stable surface. Check all assembly screws for tightness. Reduce the weight on the desktop if it exceeds the maximum capacity.
- Unusual Noises: Minor noises during adjustment are normal. If loud or persistent noises occur, ensure no components are rubbing or obstructed.
For issues not resolved by these steps, please contact FLEXISPOT customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model Name | MT137 |
| Product Dimensions | 24.9"D x 40"W x 19.6"H |
| Color | Black |
| Style | Modern |
| Base Material | Metal |
| Top Material Type | Wood |
| Finish Type | Polished |
| Special Feature | Adjustable, Adjustable Height, Ergonomic, Keyboard Tray Included |
| Item Weight | 26.7 Pounds |
| Maximum Weight Recommendation | 39 Pounds (Upper Desktop: 33 lbs, Keyboard Tray: 6.6 lbs) |
| Minimum Height | 4.7 Inches |
| Maximum Height | 19.6 Inches |
| Required Assembly | Yes (Minimal) |
| UPC | 810072862495 |
Image 8.1: Product dimensions and load capacities.
9. Warranty and Support
FLEXISPOT products are designed for durability and performance. For warranty information and customer support, please refer to the following:
- Warranty Type: Full
- Protection Plans: Additional protection plans may be available for purchase, offering extended coverage for 2 or 3 years.
- Customer Support: For assistance, please visit the official FLEXISPOT website or contact their customer service department.
- Returns: This product is returnable until January 31, 2026.
For the most current support information, please visit the FLEXISPOT Store on Amazon.
