1. Product Overview
The BlueRigger Digital Toslink Optical 3x1 Switch allows you to connect up to three digital optical audio sources to a single optical input on your audio receiver, soundbar, or amplifier. This device provides a convenient solution for managing multiple audio sources without frequently swapping cables. It supports various audio formats, ensuring high-quality sound transmission.
Figure 1: Front and rear view of the BlueRigger Digital Toslink Optical 3x1 Switch, showing input/output ports, power connection, and LED indicators.
2. Key Features
- 3-in-1 Toslink Switching: Connects three Toslink audio devices to one output device.
- Audio Format Support: Supports LPCM 2.0, 192kHz/24Bit sampling frequency, DTS/Dolby-AC3, Dolby Digital, and DTS 5.1.
- Control Options: Features both an IR remote control and a manual switch button for source selection.
- Durable Construction: Housed in a metal casing for enhanced heat dissipation and longevity.
- Stable Transmission: Incorporates an advanced IC chipset for lossless and stable audio signal transmission.
- Wide Compatibility: Compatible with any digital audio device featuring a Toslink/Optical port, including soundbars, speakers, gaming consoles (Xbox, PS4/PS3/PS2), Blu-ray players, HDTVs, amplifiers, and TV boxes.
3. Setup Instructions
3.1 Package Contents
Before installation, please verify that all items are present:
- BlueRigger Digital Toslink Optical 3x1 Switch
- IR Remote Control
- USB Power Cable (Note: Power adapter is not included)
3.2 Connection Diagram
Figure 2: Illustrative diagram for connecting input sources and an output device to the Toslink switch, including power connection.
3.3 Step-by-Step Installation
- Connect Input Devices: Use Toslink optical cables to connect your audio source devices (e.g., gaming console, HDTV, Blu-ray player) to the IN1, IN2, and IN3 ports on the BlueRigger Toslink Switch.
- Connect Output Device: Connect one end of a Toslink optical cable to the OUT port on the BlueRigger Toslink Switch and the other end to the optical input of your audio receiver, soundbar, or amplifier.
- Power Connection: Connect the provided USB power cable to the POWER port on the switch. Plug the other end into a USB power source (e.g., a USB port on your TV, a USB wall adapter, or a computer USB port). A power adapter is not included. Ensure the power LED illuminates.
- Cable Length Note: Ensure all Toslink cables used are shorter than 50 feet (approximately 15 meters) for optimal performance.
Figure 3: Visual representation of compatible Toslink ports and a Toslink cable, emphasizing the cable length recommendation.
4. Operating Instructions
The BlueRigger Digital Toslink Optical 3x1 Switch offers two methods for selecting your desired audio source:
4.1 Manual Switching
Press the 'SWITCH' button on the front panel of the device to cycle through the input sources (IN1, IN2, IN3). The corresponding LED indicator will light up to show the currently active input.
4.2 Remote Control Switching
Use the included IR remote control to directly select the desired input source. Point the remote towards the IR receiver on the front of the switch and press the button corresponding to the input you wish to activate (IN1, IN2, or IN3).
Figure 4: Illustration of the two switching methods: manual button on the device and IR remote control.
Important Note: This switch does NOT support auto-switching. You must manually select the input source using either the button on the device or the IR remote control.
5. Maintenance
To ensure the longevity and optimal performance of your BlueRigger Digital Toslink Optical 3x1 Switch, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or aerosols, which may damage the unit.
- Environment: Keep the switch in a cool, dry place away from direct sunlight, high temperatures, and excessive humidity.
- Handling: Avoid dropping or subjecting the device to strong impacts.
- Cable Care: Handle Toslink optical cables carefully. Do not bend them sharply or apply excessive force, as this can damage the fiber optic core.
6. Troubleshooting
If you encounter issues with your BlueRigger Digital Toslink Optical 3x1 Switch, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No audio output |
|
|
| Remote control not working |
|
|
| Poor audio quality or intermittent sound |
|
|
7. Product Specifications
| Specification | Detail |
|---|---|
| Model Number | 301TS-TOSLINK-SWITCH |
| Product Dimensions | 3.3 x 4.7 x 7.8 cm |
| Item Weight | 250 g |
| Interface Type | Optical (Toslink) |
| Number of Inputs | 3 |
| Number of Outputs | 1 |
| Audio Output Mode | Stereo, Surround Sound |
| Supported Audio Formats | LPCM 2.0, DTS/Dolby-AC3, Dolby Digital, DTS 5.1 |
| Sampling Frequency | Up to 192kHz/24Bit |
| Control | Manual Button, IR Remote Control |
| Power Supply | USB Powered (cable included, adapter not included) |
| Housing Material | Metal |
| UPC | 810146952206 |
8. Warranty and Support
BlueRigger stands behind the quality of its products.
- Warranty: This product is covered by a Lifetime Warranty.
- Customer Support: For any questions, technical assistance, or warranty claims, please contact BlueRigger's US-based customer support. Refer to the contact information provided with your product or visit the official BlueRigger website for details.