Enhulk PC15 Cordless Handheld Pool Vacuum User Manual

1. Introduction

The Enhulk PC15 Cordless Handheld Pool Vacuum is designed for efficient cleaning of various pool types, including inground pools, above ground pools, spas, inflatable pools, and hot tubs. Featuring a powerful motor, a wide cleaning head, and a long-lasting rechargeable battery, this vacuum simplifies pool maintenance by effectively removing debris such as acorns, twigs, leaves, mud, and sand.

Figure 1: Enhulk PC15 Cordless Handheld Pool Vacuum with accessories.

2. Safety Information

Please read all instructions carefully before using the Enhulk PC15 Pool Vacuum. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the charging port is completely dry before connecting the charger.
• Do not operate the vacuum out of water for more than 1 minute to prevent motor damage. The device has a smart safety protection feature that will automatically stop operation if not submerged.
• Keep the device out of reach of children. This is not a toy.
• Use only the provided charger and accessories.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
• Regularly inspect the unit for any damage. Do not use if damaged.

3. Package Contents

Verify that all items are included in your package:

• Enhulk PC15 Pool Vacuum Main Unit
• 13.4-inch Removable Vacuum Head with Side Brushes
• Telescopic Pole (extends from 35.8" to 87.5")
• Short Handle
• Charger
• Filter Bags (4 pieces, including fine and coarse mesh)
• Product Manual

Figure 2: Detailed view of all included components in the Enhulk PC15 package.

4. Setup and Assembly

Follow these steps to assemble your Enhulk PC15 Pool Vacuum:

1. Attach Side Brushes: Match "L" and "R" brushes to the corresponding slots on the vacuum head and snap them into place.
2. Install Filter Bag: Insert the appropriate filter bag into the transparent collection chamber. Ensure it is securely seated.
3. Connect Brush Head: Align the brush head with the main unit and push until it clicks into place.
4. Attach Handle: Choose between the short handle for close-range cleaning or the telescopic pole for extended reach. Insert the chosen handle into the top of the main unit and secure it.

Figure 3: Visual guide for assembling the Enhulk PC15 Pool Vacuum.

Initial Charging:

Before first use, fully charge the PC15. A green light on the power adapter indicates a full charge. Charging typically takes 1.5 hours for up to 60 minutes of runtime.

Figure 4: The PC15 requires 1.5 hours for a full charge, providing up to 60 minutes of operation.

Assembly and Usage Video:

5. Operating Instructions

The Enhulk PC15 is designed for powerful and efficient cleaning:

1. Power On: Locate the ON/OFF switch on the main unit and slide it to the "ON" position.
2. Submerge: Carefully submerge the vacuum head into the pool water. The unit will begin operating once fully submerged.
3. Cleaning:
   • Use the 13.4-inch wide head for general floor cleaning. Its hydrodynamic design provides powerful suction up to 18.5 gal/min.
   • Utilize the innovative side brushes for efficient cleaning of pool floors, corners, and steps.
   • The vacuum includes two types of filter bags: a 180 micron filtration bag for larger debris like acorns, twigs, and leaves, and a 500 micron filtration bag for finer particles like dirt and sand. Choose the appropriate filter for your cleaning needs.
   • For hard-to-reach areas or deeper pools, attach the telescopic pole which extends up to 87.5 inches.
4. Smart Safety Protection: The vacuum will automatically stop if it is not submerged in water for 1 minute to prevent motor idling damage. If this occurs, turn the unit off and then restart it.
5. Power Off: Once cleaning is complete, remove the vacuum from the water and slide the ON/OFF switch to the "OFF" position.

Figure 5: The upgraded 13.4-inch brush head offers powerful suction for various debris.

Figure 6: The telescopic pole extends up to 87.5 inches for deep cleaning.

Figure 7: The PC15 includes both 180 micron and 500 micron filter bags for different debris sizes.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Enhulk PC15 Pool Vacuum:

1. Empty Filter Bag: A red flashing indicator signals a clogged filter bag that needs cleaning. Remove the collection chamber and empty the debris from the filter bag.
2. Clean Filter Bag: Rinse the filter bag thoroughly with clean water after each use. Ensure all debris is removed.
3. Recharge Battery: Always recharge the unit immediately after use. The quick-charge technology allows for a full recharge in just 1.5 hours. Ensure the charging port is completely dry before plugging in.
4. Storage: Store the vacuum in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

8. Specifications

• Model: PC15
• Brand: Enhulk
• Product Dimensions: 7.87"L x 4.72"W x 27.56"H
• Item Weight: 8.33 pounds
• Power Source: Battery Powered (5x2000mAh Lithium-Ion batteries)
• Battery Energy Content: 40 Watt Hours
• Runtime: Up to 60 minutes
• Charging Time: 1.5 hours
• Suction Power: Up to 18.5 gal/min
• Vacuum Head Width: 13.4 inches
• Telescopic Pole Length: 35.8" to 87.5"
• Control Method: Touch
• Assembly Required: Yes
• Country of Origin: China

9. Warranty and Support

For warranty information, please refer to the documentation included with your Enhulk PC15 Pool Vacuum at the time of purchase. For technical support or service inquiries, please contact Enhulk customer service through their official website or the retailer where the product was purchased.

Visit the Enhulk Store: Enhulk Official Store