1. Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Always ensure the desk is properly anchored to the floor to prevent tipping.
- Do not exceed the maximum weight limit of 270 lbs (122.5 kg) on the desk frame.
- Keep children and pets away from the desk during operation.
- Ensure no obstacles are in the path of the desk's movement (up or down).
- Do not disassemble or modify the product. Contact customer support for any issues.
- Disconnect power before cleaning or maintenance.
2. Product Overview
The Okin Dual Motor Electric Standing Desk Frame provides a robust and adjustable base for your workspace, allowing seamless transitions between sitting and standing positions.
Figure 2.1: Main components of the Okin Dual Motor Electric Standing Desk Frame, including the silver frame and the black memory controller.
Key Features:
- Dual Motor System: Ensures smooth, quiet, and stable height adjustments.
- Adjustable Height Range: From 23.7 inches (60 cm) to 49.3 inches (125 cm).
- Weight Capacity: Supports up to 270 lbs (122.5 kg).
- Memory Controller: Features an intuitive control panel with 3 programmable height presets.
- Adjustable Frame Width: Crossbars extend from 43.3 inches (110 cm) to 70.9 inches (180 cm) to accommodate various desktop sizes.
- Off-Center C-Leg Design: Allows for additional storage options like drawers underneath the tabletop.
- Quiet Operation: Operates at a low noise level of 48 dB.
Figure 2.2: Diagram illustrating the adjustable dimensions of the desk frame, including height range (23.7" to 49.3") and width range (43.3" to 70.9").
Figure 2.3: Close-up view of the 3-stage sturdy frame, highlighting its robust construction for strong support and durability.
Figure 2.4: Illustration showing the dual high-performance motors and the desk's capacity to steadily lift up to 270 lbs.
3. Setup and Assembly
The Okin Electric Standing Desk Frame is designed for easy assembly. All necessary tools and parts are included. It is recommended to assemble the desk with two people.
3.1. Before You Begin:
- Unpack all components and verify against the parts list in the included installation manual.
- Clear a spacious area for assembly.
- Ensure you have a suitable desktop (not included) with recommended dimensions: 47.2"–78.8" in length and 23.6"–39.4" in depth, and a minimum thickness of 0.6 inches.
Figure 3.1: Visual guide for selecting a suitable desktop, showing recommended dimensions and minimum thickness.
3.2. Assembly Steps (General Guide):
- Attach the lifting columns to the foot supports.
- Connect the crossbar sections between the lifting columns, adjusting the width to match your desktop.
- Secure the side brackets to the lifting columns.
- Mount the control box and motors to the frame according to the detailed instructions in the manual.
- Connect all cables (motor cables, power cable, control panel cable) to the control box. Ensure connections are secure.
- Carefully place your desktop onto the assembled frame and secure it using the provided screws.
- Attach the control panel to your preferred side of the desktop (left or right).
- Plug the power cord into a grounded electrical outlet.
Refer to the comprehensive installation manual included in your package for detailed, step-by-step instructions and diagrams specific to your model.
4. Operating Instructions
The Okin Electric Standing Desk Frame features an intuitive control panel for easy height adjustment and memory functions.
Figure 4.1: The multi-function intelligent keypad, showing the memory presets (1, 2, 3), up/down arrows, and LED display.
4.1. Basic Operation:
- Adjusting Height: Use the ▲ (Up) and ▼ (Down) arrow buttons to raise or lower the desk to your desired height. The current height will be displayed on the LED screen.
- Changing Display Unit: Press the "CM/IN" button (if available on your model) to switch between centimeters and inches.
4.2. Memory Presets:
The control panel allows you to save up to 3 preferred height settings for quick adjustments.
- Saving a Preset:
- Adjust the desk to your desired height using the up/down arrows.
- Press the "M" button. The LED display will show "S-".
- Within 3 seconds, press the desired preset number button (1, 2, or 3). The display will show the number, confirming the height is saved.
- Recalling a Preset: Simply press the corresponding preset number button (1, 2, or 3). The desk will automatically move to the saved height.
4.3. Initializing the System (Reset):
If the desk encounters an error or does not move smoothly, a system reset may be required.
- Press and hold the ▼ (Down) button until the desk reaches its lowest position and then slightly retracts. Release the button.
- If the issue persists, unplug the power cord for 10-15 minutes, then plug it back in and repeat the reset procedure.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Okin Electric Standing Desk Frame.
- Cleaning: Wipe the desk frame with a dry cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
- Cable Management: Periodically check all cables to ensure they are securely connected and not pinched or tangled. Proper cable management helps prevent damage and ensures smooth operation.
- Fasteners: Occasionally check all screws and bolts to ensure they are tight. Retighten if necessary.
- Weight Distribution: Distribute weight evenly on the desktop to prevent strain on the motors and frame.
6. Troubleshooting
If you encounter issues with your desk frame, refer to the following common problems and solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; control box not connected; overload; system error. | Check power connection. Ensure all cables are securely plugged into the control box. Reduce weight on the desk. Perform a system reset (see Section 4.3). |
| Desk moves unevenly or makes unusual noise. | Uneven weight distribution; loose connections; obstruction. | Redistribute weight evenly. Check all fasteners and connections. Ensure no objects are obstructing the lifting columns. |
| LED display shows an error code. | System error; motor fault. | Perform a system reset (see Section 4.3). If the error persists, contact customer support with the error code. |
| Memory presets not working. | Presets not saved correctly; system error. | Re-save the memory presets (see Section 4.2). Perform a system reset. |
7. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Okin |
| Model Number | DS2.451.3S.01.WU.110 |
| Product Dimensions (D x W x H) | 42.52" x 14.17" x 8.66" (packaged) |
| Color | Silver |
| Base Material | Alloy Steel |
| Minimum Height | 23.7 inches (60 cm) |
| Maximum Height | 49.3 inches (125 cm) |
| Adjustable Crossbar Length | 43.3" (110 cm) to 70.9" (180 cm) |
| Weight Capacity | 270 lbs (122.5 kg) |
| Motor Type | Dual Motor |
| Noise Level | 48 dB |
| Assembly Required | Yes (Tools Included) |
| Desk Design | Standing Desk (Off-Center C Feet) |
8. Warranty Information
This Okin Electric Standing Desk Frame comes with a Limited Warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration of coverage.
The warranty typically covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the weight capacity.
9. Customer Support
For any questions, concerns, or assistance with your Okin Dual Motor Electric Standing Desk Frame, please contact our dedicated support team.
- Manufacturer: Okin
- Seller: Okin America
- For prompt assistance, please have your model number (DS2.451.3S.01.WU.110) and purchase details ready.
- You can often find support contact information on the seller's page or within your product packaging.
