Introduction
Thank you for choosing the DWVO Enclosed Cat Litter Box. This manual provides essential information for the safe and efficient use of your new litter box. Please read these instructions carefully before assembly and use, and retain them for future reference.
This enclosed cat litter box features a two-way entry/exit system, a hooded anti-splash design, a lid, and a hidden litter scoop for convenience and cleanliness.
Important Safety Information
- Ensure all parts are securely assembled before allowing your pet to use the litter box.
- Do not exceed the maximum weight capacity of 45 lbs on the top surface.
- Keep the litter box away from open flames or excessive heat sources.
- Regularly clean the litter box to maintain hygiene and prevent odors.
- This product is designed for indoor use only.
Parts List
Please verify that all components are present before beginning assembly.
- Main Enclosure Body (Top and Bottom sections)
- Slide-out Litter Tray
- Front Entry Door (translucent)
- Litter Scoop (hidden compartment)
- Top Exit Ring
Image: Overview of the DWVO Enclosed Cat Litter Box, showing its main structure and design. A cat is sitting next to it.
Setup and Assembly
- Unpack Components: Carefully remove all parts from the packaging.
- Assemble Main Body: Connect the top and bottom sections of the main enclosure body. Ensure they snap securely into place.
- Insert Slide-out Tray: Slide the litter tray into the designated slot at the bottom front of the enclosure. Ensure it slides smoothly.
- Attach Front Door: Secure the translucent front entry door into its hinges. This door provides a sheltered environment for your pet.
- Place Top Exit Ring: Insert the top exit ring into the circular opening on the lid. This feature helps filter lingering litter from your cat's paws as they exit.
- Store Litter Scoop: Place the provided litter scoop in its hidden compartment, typically located near the slide-out tray.
Image: A cat sitting on top of the assembled DWVO Enclosed Cat Litter Box, demonstrating the top exit feature.
Operating Instructions
Litter Filling
Once assembled, pull out the slide-out tray and fill it with your preferred cat litter. Ensure the litter level is appropriate for your cat, typically 2-3 inches deep. Slide the tray back into the enclosure.
Two-Way Entry/Exit
- Front Entry: Cats can enter through the translucent front door.
- Top Exit: Cats can exit by jumping out from the top opening. The hollowed-out area on the ceiling helps to filter lingering litter from their paws, reducing tracking.
Image: Diagram illustrating the two-way entry (front) and top exit design of the litter box, with arrows indicating cat movement.
Image: An overhead view showing a cat comfortably inside the spacious interior of the enclosed litter box.
Maintenance and Cleaning
Daily Cleaning
- Scooping: Pull out the slide-out tray. Use the hidden litter scoop to remove solid waste and clumps daily.
- Litter Level: Replenish litter as needed to maintain the recommended depth.
Image: A hand demonstrating how to pull out the slide-out litter tray for easy cleaning and scooping.
Deep Cleaning
- Empty Litter: Completely empty all old litter from the tray.
- Wash Components: Wash the litter tray and the main enclosure body with mild soap and water. The polished surface ensures effortless cleaning.
- Rinse and Dry: Rinse thoroughly and allow all parts to dry completely before refilling with fresh litter.
- Odor Control: The enclosed design helps contain odors, but regular cleaning is crucial for optimal odor management.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Litter tracking outside the box | Cat exiting from front; insufficient litter filtering from top exit. | Encourage top exit use. Ensure the top exit ring is properly installed to maximize litter filtering. Consider a litter mat outside the box. |
| Odor issues | Infrequent cleaning; type of litter used. | Increase frequency of scooping and deep cleaning. Try a different type of litter with better odor control properties. |
| Tray not sliding smoothly | Litter buildup or debris in tracks; misaligned tray. | Remove the tray and clean the tracks thoroughly. Ensure the tray is inserted correctly and aligned with the guides. |
| Cat hesitant to use the box | New environment; unfamiliar design. | Place the new box in the same location as the old one initially. Gradually introduce your cat to the new entry/exit points. Reward positive use. |
Specifications
- Model Name: Enclosed Cat Litter Box
- Model Number: MADWVB4mLm
- Brand: DWVO
- Color: Gray
- Material: Premium PP (Polypropylene)
- Product Dimensions (L x W x H): 20 x 15 x 15 inches (50.8 x 38.1 x 38.1 cm)
- Item Weight: 6.15 pounds (2.79 kg)
- Litter Box Type: Covered Litter Box
- Entry/Exit: Two-Way (Front and Top)
- Special Features: Slide-out tray, hidden litter scoop, anti-splash design, top exit litter filtering.
- Target Audience: House-cats
- UPC: 197839878082
Image: A detailed diagram illustrating the dimensions of the DWVO Enclosed Cat Litter Box, including length, width, and height.
Product Overview Video
Video: An official product video demonstrating the features and functionality of the DWVO Enclosed Cat Litter Box, including its two-way entry/exit and slide-out tray. Duration: 0:35.
Warranty and Support
Warranty: The product specifications state "Warranty Description: No". Please refer to the retailer's return policy for any issues.
Customer Support: For any questions or concerns regarding your DWVO Enclosed Cat Litter Box, please contact DWVO customer service through the retailer's platform or visit the official DWVO store page on Amazon: DWVO Store.
