1. Introduction
This manual provides essential information for the safe and efficient operation of your ICECO APL35 Dual Zone Portable Fridge Freezer. Please read these instructions thoroughly before initial use and retain for future reference. The APL35 is designed for portable refrigeration and freezing, suitable for various applications including RVs, camping, and travel.
Image 1.1: The ICECO APL35 Portable Fridge Freezer with its lid open, revealing two compartments filled with food and beverages.
2. Safety Information
- Ensure the power supply matches the voltage requirements of the unit (12/24V DC, 100-240V AC).
- Do not operate the unit if the power cord is damaged.
- Keep ventilation openings clear of obstructions.
- Avoid placing the unit in direct sunlight or near heat sources.
- Do not immerse the unit in water.
- Manual defrosting is required; do not use mechanical devices or other means to accelerate the defrosting process.
3. Package Contents
Verify that all items are present in the package:
- ICECO APL35 Portable Fridge Freezer Unit
- 100-240V~ Universal AC Adapter x1
- 12/24V DC Cigarette Lighter Plug Cable x1
- Instruction Manual (this document)
4. Setup
4.1 Placement
Place the fridge freezer on a stable, level surface. Ensure adequate ventilation around the unit, especially near the compressor area. The unit's dimensions are approximately 27 x 14.4 x 15.7 inches (L x W x H).
Image 4.1: A diagram illustrating the external dimensions and internal capacity of the APL35, indicating it can hold 57 cans, 25 water bottles, or 12 wine bottles.
4.2 Power Connection
Connect the appropriate power cable (AC or DC) to the unit and then to the power source. The unit supports both 12/24V DC and 100-240V AC inputs. Ensure the connection is secure.
4.3 Initial Use
After connecting to power, the unit will power on. It is recommended to run the unit empty for a few hours to allow it to reach the set temperature and stabilize before loading with contents.
5. Operating Instructions
5.1 Temperature Control
The APL35 features dual-zone temperature control, allowing you to set different temperatures for each compartment. The temperature range is from -4℉ to 68℉ (-20℃ to 20℃). Use the control panel on the unit to adjust settings. You can configure it as fridge/freezer, freezer/fridge, or operate in a single mode.
Image 5.1: An illustration demonstrating the flexible dual-zone temperature control settings, allowing for various fridge and freezer configurations.
5.2 Cooling Modes
The unit offers two cooling modes:
- MAX Mode: Provides fast cooling, ideal for quickly bringing contents to the desired temperature.
- ECO Mode: Optimizes energy consumption for extended operation, suitable for maintaining temperatures over longer periods.
Image 5.2: A graph illustrating the rapid cooling capability of the APL35, showing it cools from 77℉ to 32℉ in approximately 11 minutes.
5.3 App Control
The ICECO APL35 can be controlled via a dedicated smartphone application. This allows for remote temperature adjustment, status checks, and receiving alerts.
Image 5.3: A hand holding a smartphone showing the ICECO app interface, which enables smart control of the fridge freezer.
5.4 Lid Operation
The lid features special hinges that allow it to hover open at any angle between 45° and 110°. This design prevents accidental closures and potential hand injuries. A metal latch ensures a tight seal for improved insulation.
Image 5.4: The APL35 lid demonstrating its ability to stay open at multiple angles, from 45° to 110°, for user convenience.
6. Maintenance
6.1 Cleaning
Regularly clean the interior and exterior of the fridge freezer with a damp cloth and mild detergent. Avoid abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
6.2 Defrosting
The APL35 requires manual defrosting. When ice buildup becomes significant, unplug the unit, remove all contents, and allow the ice to melt naturally. Wipe away excess water with a clean cloth. Do not use sharp objects to remove ice.
6.3 Storage
When storing the unit for an extended period, ensure it is clean, dry, and the lid is slightly ajar to prevent odors and mildew.
7. Troubleshooting
- Unit not powering on: Check power connections, ensure the power source is active, and verify the correct voltage is being supplied.
- Insufficient cooling: Ensure the lid is properly sealed, ventilation openings are clear, and the ambient temperature is not excessively high. Check if the unit is in ECO mode; switch to MAX mode for faster cooling.
- Unusual noise: A slight humming sound from the compressor is normal. If the noise is excessive or unusual, ensure the unit is on a stable surface and not touching any objects.
- App connectivity issues: Ensure Bluetooth is enabled on your device and the unit, and that you are within range. Restart the app and the fridge freezer if necessary.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | ICECO |
| Model | APL35 |
| Capacity | 35 Liters (37 Quart) |
| Item Weight | 32 Pounds |
| Product Dimensions | 27 x 14.4 x 15.7 inches |
| Voltage | 12/24V DC, 100-240V AC |
| Temperature Range | -4℉ to 68℉ (-20℃ to 20℃) |
| Compressor | Secop Nano Compressor |
| Material Type | Aluminum |
| Defrost System | Manual |
| Special Features | Anti-Shake, App Control, Lightweight, Low Noise, Portable |
Image 8.1: The ICECO APL35 being carried, highlighting its ultra-lightweight design at 32 lbs.
9. Warranty and Support
9.1 Warranty Information
The ICECO APL35 comes with a 5-year warranty for the compressor and over 1 year of technical support for other parts. This warranty covers defects in materials and workmanship under normal use.
Image 9.1: A detailed view of the SECOP Nano Compressor, emphasizing the 5-year compressor guarantee.
9.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact the ICECO U.S.-based support team. Refer to the contact information provided with your purchase or visit the official ICECO website for details.
