4DRC V8
4DRC V8 Mini Drone User Manual
Model: V8 (Grey-V8)
Brand: 4DRC
1. Introduction
Thank you for choosing the 4DRC V8 Mini Drone. This compact and versatile quadcopter is designed for both beginners and experienced pilots, offering a range of features including a 1080P HD camera, altitude hold, headless mode, and various stunt capabilities. Please read this manual thoroughly before operating the drone to ensure safe and optimal performance.

Image 1.1: The 4DRC V8 Mini Drone package contents, including the drone, remote controller, two batteries, spare propellers, a charging cable, and a compact carrying case.
2. Package Contents
Verify that all items are present in your package:
- 4DRC V8 Mini Drone (Grey)
- Remote Controller
- Lithium Ion Batteries (2 pieces)
- Propeller Guards (4 pieces, pre-installed or separate)
- USB Charging Cable
- Spare Propellers
- User Manual
3. Product Overview
Familiarize yourself with the main components of your 4DRC V8 Mini Drone.

Image 3.1: The drone features a 1080P HD FPV camera for high-quality video and photo capture.
- Drone Body: Houses the main electronics, battery compartment, and camera.
- Propellers: Four propellers for lift and movement. Each is protected by a guard.
- Propeller Guards: Built-in guards to protect propellers and enhance safety.
- 1080P HD Camera: Integrated camera for photo and video recording.
- LED Indicators: Lights on the drone to indicate status (e.g., power, pairing, low battery).
- Battery Compartment: Located at the rear of the drone for battery insertion.
- Remote Controller: Used for manual flight control.
4. Setup
4.1 Charging the Batteries
The drone comes with two rechargeable Lithium Ion batteries, providing up to 20 minutes of flight time (approximately 10 minutes per battery).
- Connect the USB charging cable to the drone battery.
- Plug the other end of the USB cable into a 5V/1A USB power adapter (not included) or a computer USB port.
- The indicator light on the charging cable will show charging status (e.g., red for charging, off or green for fully charged).
- Charging typically takes 60-80 minutes per battery. Do not overcharge.
Note: The remote controller requires 3 AAA batteries (not included). Install them according to the polarity markings inside the battery compartment.

Image 4.1: The drone's two batteries provide a combined flight time of up to 20 minutes.
4.2 Propeller Guards Installation
The 4DRC V8 Mini Drone comes with built-in propeller guards for enhanced safety, especially for new users and indoor flights. Ensure they are securely attached before flight.

Image 4.2: The drone's propeller guards are designed for safety, protecting both the drone and its surroundings.
4.3 App Download and Connection
To utilize the FPV camera and advanced features, download the official 4DRC app on your smartphone.
- Scan the QR code in the quick start guide (or search for "4DRC" in your app store) to download the app.
- Turn on the drone.
- Go to your phone's Wi-Fi settings and connect to the drone's Wi-Fi network (usually named "4DRC-V8-XXXXXX").
- Open the 4DRC app. The live video feed from the drone's camera should appear.

Image 4.3: Real-time FPV transmission allows you to see what the drone sees directly on your smartphone.
5. Operating Instructions
5.1 Pairing the Remote Controller
- Place the drone on a flat, level surface.
- Turn on the drone's power switch. The drone's indicator lights will flash.
- Turn on the remote controller.
- Push the left joystick (throttle) all the way up, then all the way down. The drone's lights will stop flashing and become solid, indicating successful pairing.
5.2 Calibration
After pairing, calibrate the gyroscope for stable flight.
- With the drone on a flat surface, push both joysticks down and to the right simultaneously.
- The drone's lights will flash rapidly and then become solid, indicating successful calibration.
5.3 Takeoff and Landing
- One Key Takeoff/Landing: Press the One Key Takeoff/Landing button on the remote. The drone will automatically ascend to a stable altitude or descend and land gently.
- Manual Takeoff: After pairing and calibration, slowly push the left joystick (throttle) upwards to make the drone ascend.
- Palm Takeoff: With the drone in your palm, perform the pairing and calibration. Gently toss the drone upwards, and it will automatically stabilize and hover.

Image 5.1: The drone offers easy-to-use features like One Key Take Off/Landing and Headless Mode.
5.4 Flight Controls
The remote controller uses a standard drone control layout:
- Left Joystick (Throttle/Yaw):
- Up/Down: Ascend/Descend
- Left/Right: Rotate Left/Right (Yaw)
- Right Joystick (Pitch/Roll):
- Up/Down: Fly Forward/Backward (Pitch)
- Left/Right: Fly Left/Right (Roll)

Image 5.2: The drone supports both traditional remote control and intuitive hand-operated flight.
5.5 Special Flight Modes and Features
- Altitude Hold Mode: The drone will automatically maintain its current altitude, making it easier to control and capture stable photos/videos.
- Headless Mode: In this mode, the drone's orientation is irrelevant. It will fly forward relative to the pilot's position, regardless of which way the drone's "head" is facing. Activate by pressing the Headless Mode button.
- 3 Speed Modes: Press the speed button on the remote to cycle through low, medium, and high speeds. Low speed is recommended for beginners and indoor flight.
- 3D Flips: Press the 3D Flip button, then move the right joystick in any direction (forward, backward, left, or right) to perform a 360-degree flip in that direction. Ensure sufficient altitude (at least 2 meters) before attempting.
- Circle Flight: Activate this feature via the app. The drone will fly in a circular path around a central point.
- Custom Flight Path (Tap Fly): In the app, draw a desired flight path on your screen. The drone will follow this path automatically.
- Hand Operated Mode: The drone features gravity sensors allowing it to be controlled by hand gestures. With 5 sensors (front, back, left, right, bottom), it can respond to hand movements for basic flight.
- Emergency Stop: In case of an emergency or loss of control, press the emergency stop button on the remote. The drone will immediately cease propeller rotation and fall. Use with caution as this may cause damage.
- Low Battery Warning: The drone is equipped with a low battery warning system. When the battery is low, the drone's indicator lights will flash, signaling it's time to land.

Image 5.3: The drone is capable of performing exciting 3D flips with a single button press.

Image 5.4: Engage Circle Flight mode for automated circular flight paths.
5.6 Camera Operation
The 1080P HD FPV camera allows you to capture photos and videos directly to your smartphone via the app.
- Photo Capture: Tap the camera icon in the app to take a photo. Some models support gesture control for photos (e.g., V-sign gesture).
- Video Recording: Tap the video icon in the app to start/stop recording.
- Real-time Transmission: View the live feed from the drone's camera on your smartphone screen.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the drone body and camera lens. Do not use harsh chemicals or liquids.
- Propeller Replacement: If a propeller is damaged, carefully remove it and replace it with a spare, ensuring the correct propeller type (A or B) is installed in the corresponding position.
- Battery Care:
- Store batteries in a cool, dry place.
- Do not fully discharge batteries. Charge them to about 50% for long-term storage.
- Do not expose batteries to extreme temperatures or direct sunlight.
- Storage: When not in use, store the drone and remote in a safe place, away from direct sunlight and moisture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not respond to remote. | Not paired or low battery. | Ensure drone and remote are fully charged. Re-pair the drone and remote. |
| Drone drifts during flight. | Not calibrated or uneven surface at takeoff. | Perform gyroscope calibration on a flat surface. Use trim buttons on the remote to adjust. |
| Short flight time. | Battery not fully charged or old battery. | Ensure batteries are fully charged before each flight. Consider replacing old batteries. |
| FPV feed is laggy or disconnected. | Weak Wi-Fi signal or interference. | Ensure strong Wi-Fi connection between phone and drone. Reduce distance or move to an area with less interference. |
| Drone crashes frequently. | Pilot inexperience or propeller damage. | Practice in low-speed mode. Check propellers for damage and replace if necessary. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | 4DRC |
| Model Name | V8 |
| Product Dimensions | 13 x 11 x 4 cm |
| Item Weight | 180 g |
| Batteries | 2 Lithium Ion batteries (included) |
| Flight Time | Up to 20 minutes (with 2 batteries) |
| Video Capture Resolution | 1080p |
| Connectivity Technology | Wi-Fi |
| Special Features | 360 Degree Flip, Long Distance Control, One Key Rotation, Long Battery Life, One Button Return, Altitude Hold, Headless Mode, Gravity Sensor Mode, Palm Takeoff, QuickShots |
| Included Components | Drone, Remote, 2 Batteries, 4 Propeller Guards, USB Charging Cable, Spare Propellers |
9. Warranty and Support
Your 4DRC V8 Mini Drone is covered by a standard manufacturer's warranty. Please refer to the product packaging or the official 4DRC website for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact 4DRC customer service through their official channels. You can also visit the 4DRC Store on Amazon for more information and product updates.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





