1. Introduction
Thank you for purchasing the Brilliant Xino Rechargeable Wall Lamp. This manual provides essential information for the safe and efficient use of your new lighting product. Please read this manual thoroughly before installation and operation, and retain it for future reference.
The Brilliant Xino is a wireless, rechargeable LED wall lamp designed for indoor use, offering flexible lighting solutions without the need for permanent wiring.
2. Safety Instructions
- Read all instructions: Before using the lamp, read all safety and operating instructions.
- Indoor use only: This lamp is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
- Power source: Use only the specified charging method (e.g., USB cable) to recharge the lamp. Do not use unauthorized chargers.
- Avoid water: Do not immerse the lamp in water or other liquids.
- Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners.
- No user-serviceable parts: Do not attempt to open, disassemble, or repair the lamp. This may void the warranty and pose a safety risk.
- Disposal: Dispose of the lamp and its internal battery according to local regulations. Do not dispose of with household waste.
3. Package Contents
Please check the package for the following items:
- Brilliant Xino Rechargeable Wall Lamp (Model G80605/05)
- Mounting hardware (screws, wall plugs)
- USB Charging Cable
- User Manual (this document)
Note: Product images are not available for display in this manual.
4. Setup
4.1 Initial Charging
- Before first use, fully charge the lamp.
- Connect the small end of the provided USB charging cable to the charging port on the lamp.
- Connect the larger end of the USB cable to a standard USB power adapter (not included) or a powered USB port (e.g., computer).
- The charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
- Charging time may vary, typically 2-4 hours for a full charge.
4.2 Mounting the Lamp
- Choose a suitable indoor location on a wall where you wish to install the lamp. Ensure the surface is clean and dry.
- Mark the desired drilling points on the wall using the lamp's mounting bracket as a template.
- Drill holes at the marked positions. Use an appropriate drill bit size for the provided wall plugs.
- Insert the wall plugs into the drilled holes.
- Align the mounting bracket with the holes and secure it to the wall using the provided screws.
- Attach the lamp body to the mounted bracket according to the design (e.g., slide it on, click it into place). Ensure it is securely fastened.
5. Operating Instructions
5.1 Power On/Off
Locate the power button or switch on the lamp. Press or toggle it to turn the lamp on or off.
5.2 Brightness/Mode Adjustment (if applicable)
If your lamp features adjustable brightness or multiple lighting modes, refer to the specific controls:
- Single press: May cycle through different brightness levels or color temperatures.
- Long press: May activate stepless dimming or a special mode.
Experiment with the controls to find your preferred setting.
5.3 Recharging
When the light output diminishes or the battery indicator (if present) signals low power, recharge the lamp following the steps in Section 4.1.
6. Maintenance
6.1 Cleaning
Ensure the lamp is turned off and disconnected from any charging source before cleaning. Wipe the exterior of the lamp with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
6.2 Battery Care
To prolong battery life, avoid fully discharging the lamp frequently. If storing the lamp for an extended period, charge it to approximately 50% every few months.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp fully. |
| Lamp does not turn on. | Power button/switch is not engaged. | Ensure the power button/switch is pressed or toggled correctly. |
| Lamp light is dim. | Low battery. | Recharge the lamp. |
| Lamp does not charge. | USB cable or power adapter is faulty. | Try a different USB cable or power adapter. Ensure the power source is active. |
| Lamp is loose on the wall. | Mounting screws are loose or lamp not properly attached. | Tighten mounting screws or re-attach the lamp securely to the bracket. |
If you encounter issues not listed here, or if troubleshooting steps do not resolve the problem, please contact customer support.
8. Specifications
- Model: G80605/05
- Brand: Brilliant
- Product Dimensions: 16 x 6.3 x 9.5 cm
- Weight: 500 grams
- Material: Plastic
- Lighting Type: LED
- Features: Wireless, Rechargeable
- Power Source: Integrated rechargeable battery (charged via USB)
- Intended Use: Indoor
9. Warranty and Support
For warranty information, please refer to the warranty card included with your purchase or visit the official Brilliant website. Keep your proof of purchase for warranty claims.
If you require technical assistance or have questions about your Brilliant Xino Rechargeable Wall Lamp, please contact Brilliant customer support through their official website or the retailer from whom you purchased the product.
No official product videos are available for embedding in this manual.