DUMOS 24-Inch Counter Height Bar Stools (Set of 4)

Important Safety Information

Failure to follow these safety instructions may result in injury or damage to the product.

• Always assemble the stool according to the provided instructions to ensure stability and prevent accidents.
• Do not exceed the maximum weight recommendation of 250 pounds (113 kg) to maintain safety and product integrity.
• Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
• Avoid standing on the stool or using it as a ladder.
• Keep children away from the assembly area. Small parts can be a choking hazard.
• Do not expose the base to excessive moisture or water to prevent rust and damage.

Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 4 x Bar Stool Seats (PU Leather)
• 4 x Gas Lift Cylinders
• 4 x Footrests
• 4 x Base Plates
• 1 x Assembly Hardware Kit (screws, washers, Allen wrench)
• 1 x Instruction Manual

Setup and Assembly

Assembly is straightforward and typically takes about 20 minutes per stool. Follow these steps carefully:

1. Attach the Seat to the Top Plate: Align the holes on the bottom of the bar stool seat with the holes on the top plate of the gas lift mechanism. Secure with the provided screws and Allen wrench.
2. Insert the Gas Lift Cylinder: Place the narrow end of the gas lift cylinder into the central hole of the base plate. Ensure it sits firmly.
3. Attach the Footrest: Slide the footrest ring over the gas lift cylinder, ensuring it rests on the designated groove or support.
4. Connect Seat Assembly to Base: Carefully place the assembled seat (with the top plate attached) onto the wider end of the gas lift cylinder. Press down firmly to secure the connection.
5. Final Check: Ensure all connections are tight and the stool is stable before use.

Image: Product dimensions and weight capacity. Note the adjustable height from 24.2 to 32.5 inches and a maximum load of 250 lbs.

Image: Key components of the bar stool, including the comfortable backrest, sturdy gas cylinder, and built-in footrest.

Operating Instructions

• Height Adjustment: To adjust the seat height, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at the desired height.
• 360-Degree Swivel: The seat is designed to swivel freely 360 degrees. Simply rotate the seat in any direction for easy movement and access.
• Footrest: Utilize the built-in footrest for added comfort and support, especially during prolonged seating.

Image: Demonstrating the 360-degree swivel and height adjustment capabilities of the bar stool.

Maintenance

Proper care will extend the life and appearance of your DUMOS bar stools:

• Cleaning: Wipe the PU leather and metal surfaces with a dry, soft cloth. For stubborn spots, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
• Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
• Avoid Moisture: Do not allow liquids to pool on the metal base to prevent rust.
• Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or cracking of the PU leather.

Troubleshooting

Specifications

Warranty and Customer Support

DUMOS products are manufactured with quality and care. For any questions, missing parts, or issues not covered in this manual, please refer to your purchase documentation for warranty details or contact DUMOS customer support directly. Please have your model number (C-8100-BK-4P) and purchase date available when contacting support.

You can often find contact information on the retailer's website or on the original packaging.