Kircuit 12V AC/DC Adapter User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Kircuit 12V AC/DC Adapter. This adapter is designed to convert standard AC power into the DC power required by your compatible device, enabling its operation or battery charging.

The Kircuit adapter is specifically compatible with the LYSMOSKI Hair Removal Cooling System IPL Permanent 3-in-1 At-Home Device, including models QL036-1203000U and QL0361203000U.

Image 1.1: Two Kircuit 12V AC/DC power adapters. The label on the front adapter shows input and output specifications.

2. Safety Information

Please read and understand all safety instructions before using the adapter. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected device.

• Ensure the adapter is used with devices that match its voltage and current specifications.
• The adapter supports a worldwide input voltage range of 100-240VAC, 50/60Hz.
• This adapter features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your devices.
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Do not disassemble or modify the adapter.
• Keep out of reach of children.
• Unplug the adapter from the power outlet when not in use for extended periods.

3. Setup

Follow these steps to properly set up your Kircuit AC/DC adapter:

1. Verify Compatibility: Ensure your device, such as the LYSMOSKI Hair Removal Device (models QL036-1203000U or QL0361203000U), requires a 12V DC power input and has a compatible barrel connector.
2. Connect to Device: Insert the barrel connector of the Kircuit adapter firmly into the power input port of your LYSMOSKI device.
3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard electrical wall outlet (100-240VAC).

Image 3.1: Kircuit 12V AC/DC power adapter with its attached cord, indicating a length of 6.5 feet.

Image 3.2: The Kircuit adapter plugged into a power strip, demonstrating a typical connection scenario.

4. Operating Instructions

Once the adapter is correctly connected to both your device and a power outlet, your LYSMOSKI Hair Removal Device should receive power. The adapter functions as a direct power source, allowing you to operate the device or charge its internal battery (if applicable).

• Ensure all connections are secure before powering on your device.
• Refer to your LYSMOSKI device's user manual for specific operating instructions.

5. Maintenance

Proper maintenance ensures the longevity and safe operation of your adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cord to prevent damage.
• Inspection: Periodically inspect the adapter and its cord for any signs of damage, such as cuts, frayed wires, or bent prongs. If damage is found, discontinue use immediately and replace the adapter.

6. Troubleshooting

If you encounter issues with your Kircuit AC/DC adapter, refer to the following common troubleshooting steps:

• Device Not Powering On:
  • Ensure the adapter is securely plugged into both the device and a working wall outlet.
  • Test the wall outlet with another device to confirm it has power.
  • Check the adapter's cord and connector for any visible damage.
• Adapter Feels Hot:
  • It is normal for adapters to feel warm during operation. However, if it is excessively hot to the touch or emitting smoke/smell, unplug it immediately.
  • Ensure the adapter is not covered or placed in an area with poor ventilation.
• Intermittent Power:
  • Check for loose connections at both the device and the wall outlet.
  • Inspect the adapter's cord for any internal breaks or damage.

If the problem persists after trying these steps, contact customer support or consider replacing the adapter.

7. Specifications

8. Warranty and Support

For warranty information or technical support regarding your Kircuit 12V AC/DC Adapter, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Ensure you have your purchase details and the adapter's model information available when seeking support.