Introduction
Thank you for choosing the KTGEE T08 Wireless Earbuds. These earbuds are designed to provide a superior audio experience with advanced features for convenience and durability. This manual will guide you through the setup, operation, and maintenance of your new earbuds.
What's Included
- KTGEE T08 Wireless Earbuds (Left and Right)
- LED Display Charging Case
- Type-C Charging Cable
- User Manual
Image: KTGEE T08 Wireless Earbuds and Charging Case with LED display.
Product Overview
Earbud Features
- Ergonomic Design: Lightweight (3.9g each) U-shaped arc semi-in-ear structure for comfortable and stable fit.
- Hi-Fi Sound Quality: 13.2mm large dynamic drivers with titanium-plated diaphragm for deep bass and pure treble.
- Smart Touch Control: Improved accuracy for playback/pause, call management, voice assistance, and volume control.
- IPX7 Waterproof: Protects earbuds from sweat and small raindrops (charging case not waterproof).
Charging Case Features
- LED Display: Shows remaining power of the charging case and charging status of earbuds.
- Extended Battery Life: Provides up to 40 hours of total playback time.
- Type-C Fast Charging: Quick and convenient charging.
- Compact Design: Sleek and portable for easy carrying.
Image: KTGEE T08 Earbuds and Charging Case demonstrating one-step auto pairing with a smartphone.
Setup and Pairing
- Initial Charge: Before first use, fully charge the earbuds and charging case. Connect the provided Type-C charging cable to the charging port on the case and a power source. The LED display will show the charging progress.
Image: Close-up of the KTGEE T08 charging case LED display indicating full charge.
- Power On & Pairing:
- Open the charging case lid. The earbuds will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for "T08".
- Select "T08" from the list of available devices to connect. A voice prompt will confirm successful pairing.
Image: KTGEE T08 Earbuds in their charging case, highlighting the advanced Bluetooth 5.3 chip for stable connection and reduced power consumption.
- Single Earbud Mode: You can use either the left or right earbud independently. Simply take one earbud out of the case, and it will automatically connect to your device if previously paired.
Operating Instructions
Touch Controls
The KTGEE T08 earbuds feature intuitive touch controls on each earbud. Refer to the table below for common functions:
| Action | Function |
|---|---|
| Single Tap (L/R) | Play/Pause Music, Answer/End Call |
| Double Tap (L) | Previous Track |
| Double Tap (R) | Next Track |
| Quick Triple Click (L/R) | Activate Voice Assistant (Siri, Google Assistant, etc.) |
| Long Tap (L) | Volume Down |
| Long Tap (R) | Volume Up |
Image: A user demonstrating the smart touch controls on the KTGEE T08 earbuds for various functions.
Charging the Earbuds and Case
- Charging Earbuds: Place the earbuds back into the charging case. They will automatically begin charging. The LED display on the case will show their individual charging status.
- Charging Case: Connect the provided Type-C USB cable to the charging port on the case and a USB power adapter (not included). The LED display will indicate the case's battery level. A full charge takes approximately 2 hours.
- Fast Charging: A 15-minute charge can provide up to 90 minutes of music playback.
Image: The compact design of the KTGEE T08 earbuds and charging case, emphasizing portability.
Maintenance and Care
- Clean the earbuds and charging case regularly with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents.
- Keep the charging contacts on the earbuds and inside the case clean to ensure proper charging.
- Store the earbuds in their charging case when not in use to protect them and maintain battery life.
- While the earbuds are IPX7 waterproof, the charging case is not. Avoid exposing the charging case to water.
Troubleshooting
| Problem | Solution |
|---|---|
| Earbuds not pairing/connecting. | Ensure earbuds are charged. Turn off and on Bluetooth on your device. Place earbuds back in case, close lid, then open again to re-enter pairing mode. Forget "T08" from your device's Bluetooth list and re-pair. |
| No sound from one earbud. | Ensure both earbuds are charged. Place both earbuds back in the case, close the lid, and then take them out together. Check device's audio balance settings. |
| Charging issue. | Check if the charging cable is securely connected. Ensure the charging contacts on the earbuds and case are clean and free of debris. Try a different USB port or power adapter. |
| Low volume/Poor sound quality. | Adjust volume on both your device and via earbud touch controls. Ensure earbuds are properly seated in your ears. Clean any earwax buildup from the earbud mesh. |
Specifications
- Model: T08
- Bluetooth Version: 5.3
- Bluetooth Range: 12 Meters
- Audio Driver Size: 13.2mm Dynamic Driver
- Earbud Weight: 3.9g (each)
- Charging Case Battery Capacity: 500 mAh
- Earbud Playback Time: Up to 8 hours (single charge)
- Total Playback Time: Up to 40 hours (with charging case)
- Charging Time: Approx. 2 hours (case)
- Water Resistance: IPX7 (earbuds only)
- Control Type: Touch Control
- Charging Port: Type-C
Warranty and Support
For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official KTGEE website. Keep your purchase receipt for warranty claims.
Manufacturer: Dongguan Huien Electronic Technology Co., Ltd
Brand Store: Visit the KTGEE Store on Amazon
Important Safety Information
- Do not disassemble or modify the product.
- Keep away from extreme temperatures and direct sunlight.
- Avoid dropping or subjecting the product to strong impacts.
- Do not expose to fire or dispose of in fire.
- Keep out of reach of children.