Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS P5660FR 2-in-1 Socket Thermostat and Timer. This device is designed to control heating and cooling appliances by regulating room temperature and managing operation times. Please read this manual thoroughly before use to ensure safe and efficient operation.
Important Safety Information
- Ensure the device is used with compatible electrical outlets and appliances.
- Do not exceed the maximum load capacity of 16A / 3680W.
- This product is designed for indoor use only.
- Keep away from water and high humidity.
- Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
- Unplug the device from the wall socket before cleaning.
- Country Compatibility: This product is manufactured to French standards and is suitable for use in France, Poland, Czech Republic, Slovakia, or Belgium. It is not suitable for use in Germany, Austria, Spain, Netherlands, Sweden, or Italy due to differing socket standards.
Image Description: A graphic illustrating the country compatibility of the EMOS P5660FR. It shows green checkmarks for France, Poland, Czech Republic, Slovakia, and Belgium, indicating suitability. Red crosses are shown for Germany, Spain, Netherlands, and Italy, indicating non-suitability due to differing socket standards.
Product Overview
The EMOS P5660FR combines a digital room thermostat and a programmable timer in a single socket device. It features a backlit display for clear visibility and intuitive controls for setting temperature and time programs.
Image Description: Front view of the EMOS P5660FR device. It features a large digital display showing time (7:00), mode (ON, AUTO, P1), and a flame icon for heating. Below the display are control buttons: '-', 'TIME', 'PROG', '+', 'BOOST', and 'MODE'. At the bottom is a French-standard electrical socket.
Key Features:
- Temperature Control: Regulates room temperature between 5-40°C.
- Timer Function: Programmable schedules for automatic operation.
- Heating and Cooling Modes: Suitable for various appliances.
- Backlit Display: Easy to read in different lighting conditions.
- Backup Battery: Retains settings during power outages (1x 3V CR2032 included).
- Maximum Load: 16A / 3680W.
Image Description: A graphic highlighting the features of the EMOS P5660FR. It shows the device plugged into a wall socket next to a heater. Text indicates "Multifunction Socket," "16A 3680W Max. Load," "Heating/Cooling," "Backlit Display," and "1x 3V CR2032 Included" for backup battery.
Setup
- Unpacking: Carefully remove the thermostat from its packaging.
- Battery Installation: The device comes with a pre-installed CR2032 backup battery. Ensure the battery tab is removed if present, or replace the battery if the display is not functioning.
- Plug In: Insert the EMOS P5660FR into a suitable wall socket. Ensure the socket is compatible with French standards.
- Connect Appliance: Plug your heating or cooling appliance (e.g., radiator, fan heater, air conditioner) into the socket on the front of the EMOS P5660FR.
- Initial Power On: The display should light up, showing the current time and temperature.
Image Description: The EMOS P5660FR thermostat plugged into a wall socket, with a white fan heater connected to its integrated socket. The display shows a room temperature of 24.4°C and a timer setting.
Operating Instructions
Setting the Current Time:
- Press and hold the TIME button until the hour digit flashes.
- Use the + or - buttons to adjust the hour.
- Press TIME again to move to the minute setting. Adjust with + or -.
- Press TIME again to set the day of the week. Adjust with + or -.
- Press TIME to confirm and exit.
Setting Temperature Mode (Heating/Cooling):
- Press the MODE button to cycle through available modes.
- Look for icons on the display:
- Flame icon: Heating mode. The device will activate the connected appliance when the temperature drops below the set point.
- Snowflake icon: Cooling mode. The device will activate the connected appliance when the temperature rises above the set point.
Setting the Desired Temperature:
- In normal operating mode, press the + or - buttons. The set temperature will flash.
- Use + or - to adjust the desired temperature.
- The display will return to showing the current room temperature after a few seconds, and the new set point will be saved.
Programming the Timer:
The device allows for multiple programmable periods (P1, P2, etc.) for different times of the day or week.
- Press and hold the PROG button until the program number (e.g., P1) flashes.
- Use + or - to select the program number you wish to edit.
- Press PROG again. The start time for the selected program will flash. Adjust with + or -.
- Press PROG again. The end time for the selected program will flash. Adjust with + or -.
- Press PROG again. The desired temperature for this program period will flash. Adjust with + or -.
- Repeat for other program periods (P2, P3, etc.) as needed.
- Press MODE to exit programming mode.
Using BOOST Function:
The BOOST function provides a temporary override of the current program or temperature setting for a specified duration.
- Press the BOOST button. The display will show a temporary temperature or duration.
- Use + or - to adjust the boost duration or target temperature.
- The device will operate at the boost setting for the set duration, then return to the programmed schedule.
Image Description: The EMOS P5660FR thermostat plugged into a wall socket, with a black power cable from a radiator connected to its integrated socket. The display shows a time of 7:00 and program P1, indicating active timer control for heating.
Maintenance
- Cleaning: Disconnect the device from the power supply before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: If the display becomes dim or settings are lost frequently, the CR2032 backup battery may need replacement. Open the battery compartment (usually on the back) and replace with a new 3V CR2032 battery, observing polarity.
- Storage: If storing the device for an extended period, remove the backup battery to prevent leakage. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on / Display blank. | No power from wall socket; backup battery depleted. | Check wall socket power; replace CR2032 backup battery. |
| Appliance not turning on/off as expected. | Incorrect temperature setting; incorrect timer program; appliance not plugged in correctly or faulty. | Verify set temperature and mode (heating/cooling); check timer program; ensure appliance is functional and properly connected. |
| Settings are lost after power outage. | Backup battery is depleted or missing. | Replace the CR2032 backup battery. |
| Inaccurate temperature readings. | Sensor obstructed or exposed to direct heat/cold sources. | Ensure the device is placed in an area with stable ambient temperature, away from drafts or direct heat/cold. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | P5660FR |
| Product Dimensions | 8.2D x 6.2W x 14.6H centimeters |
| Weight | 250 g |
| Brand | EMOS |
| Controller Type | Digital display |
| Temperature Range | 5-40°C |
| Maximum Load | 16A / 3680W |
| Special Features | Lighted, Programmable |
| Color | White |
| Connectivity Technology | Wired |
| Included Components | Thermostat |
| Backup Battery | 1x 3V CR2032 (Included) |
Image Description: A diagram showing the dimensions of the EMOS P5660FR. The front view indicates a width of 62 mm and a height of 146 mm. The side view shows a depth of 82 mm (including the plug).
Warranty and Support
For warranty information or technical support, please refer to the official EMOS website or contact your local distributor. Keep your purchase receipt as proof of purchase.
For further assistance, you may visit the EMOS brand page on Amazon.
