Introduction
The HyperX Cloud III Wireless Gaming Headset is designed to provide an immersive audio experience and superior comfort for extended gaming sessions. Compatible with PC, PlayStation 5, PlayStation 4, and Nintendo Switch, this headset features powerful 53mm drivers, DTS Headphone Spatial Audio, and a long-lasting battery. Its durable yet lightweight design ensures reliability and ease of use across various gaming platforms.
What's in the Box
- HyperX Cloud III Wireless Gaming Headset (Black)
- Detachable Noise-Canceling Microphone
- USB-C Wireless Dongle
- USB-A Adapter
- USB-C Charging Cable
- Headphone Stand (Black)
- Diginerds Cleaning Kit (7-in-1)
- Cable Wraps
Image: HyperX Cloud III Wireless Headset shown with its detachable microphone, USB-C dongle, USB-A adapter, USB-C charging cable, headphone stand, Diginerds cleaning kit, and cable wraps.
Setup
1. Charging the Headset
Before first use, fully charge the headset. Connect the supplied USB-C charging cable to the headset's USB-C port and the other end to a powered USB port (e.g., computer, wall adapter). The LED indicator on the headset will show charging status.
Image: A detailed view of the left earcup of the HyperX Cloud III Wireless Headset, highlighting the USB-C charging port, power button, and microphone mute button.
2. Connecting to Devices
The HyperX Cloud III Wireless Headset connects wirelessly via a 2.4 GHz USB-C dongle.
Image: The USB-C wireless dongle and the USB-A adapter for the HyperX Cloud III Wireless Headset.
For PC (Windows):
- Insert the USB-C wireless dongle directly into an available USB-C port on your PC. If your PC only has USB-A ports, attach the USB-A adapter to the USB-C dongle, then insert into a USB-A port.
- Power on the headset by pressing and holding the power button until the LED indicator illuminates.
- The headset should automatically pair with the dongle. Once connected, the LED on the dongle will be solid.
- In Windows Sound Settings, select "HyperX Cloud III Wireless" as your default playback and recording device.
For PlayStation 5 / PlayStation 4:
- Insert the USB-C wireless dongle into an available USB-C port on your console. If using PS4 or a PS5 without a USB-C port, use the USB-A adapter.
- Power on the headset.
- The headset will automatically connect. Adjust audio settings in the PlayStation system menu if necessary.
For Nintendo Switch:
- Insert the USB-C wireless dongle into the USB-C port on the bottom of the Nintendo Switch (in handheld mode) or into a USB-A port on the dock.
- Power on the headset.
- The headset will automatically connect.
3. Attaching the Microphone
The headset features a detachable microphone. Align the microphone's connector with the port on the left earcup and push firmly until it clicks into place. Ensure the microphone is fully inserted for proper function.
Image: The HyperX Cloud III Wireless Headset with its detachable microphone attached, ready for use.
Operating the Headset
Power On/Off
- To power on: Press and hold the power button on the left earcup for 3 seconds.
- To power off: Press and hold the power button for 3 seconds.
Volume Control
Adjust the volume using the scroll wheel located on the right earcup. Scroll up to increase volume and down to decrease volume.
Image: A top-down view of the HyperX Cloud III Wireless Headset, highlighting the volume scroll wheel on the right earcup and the power/mute buttons on the left earcup.
Microphone Mute
Press the microphone mute button on the left earcup to toggle the microphone on or off. An LED indicator on the microphone will show its mute status (red for muted).
DTS Headphone Spatial Audio
The headset supports DTS Headphone Spatial Audio for enhanced positional accuracy. This feature is typically enabled and managed through the HyperX NGENUITY software on PC. Ensure the software is installed and updated for optimal performance.
Maintenance
Cleaning
- Use a soft, dry cloth to wipe down the headset and earcups.
- For deeper cleaning, use the provided Diginerds Cleaning Kit. Follow the kit's instructions for safe and effective cleaning of electronics.
- Do not use harsh chemicals, abrasive cleaners, or immerse the headset in water.
- Ensure the headset is powered off and disconnected from all devices before cleaning.
Storage
When not in use, store the headset on the provided headphone stand in a cool, dry place away from direct sunlight and extreme temperatures. Detach the microphone if preferred for storage or transport.
Troubleshooting
| Issue | Possible Solution |
|---|---|
| No audio from headset |
|
| Microphone not working |
|
| Headset not connecting wirelessly |
|
| Short battery life |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | Cloud III Wireless Gaming Headset |
| Model Number | 77Z46AA |
| Connectivity Technology | Proprietary 2.4 GHz Wireless (USB-C Dongle) |
| Compatible Devices | Windows PCs, PS5, PS4, Nintendo Switch |
| Audio Driver Size | 53 mm Dynamic Drivers |
| Battery Life | Up to 120 hours |
| Charging Time | Approximately 2 hours |
| Microphone | Detachable, Noise-Canceling with LED Mute Indicator |
| Spatial Audio | DTS Headphone Spatial Audio |
| Frame Material | Aluminum |
| Earcup Material | Leatherette-covered Memory Foam |
| Item Weight | 12.8 ounces (approx. 0.8 lbs) |
| Product Dimensions | 6.1 x 3.41 x 7.48 inches |
Warranty and Support
HyperX products are designed for reliability and performance. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official HyperX support website.
For technical support, troubleshooting assistance, or to download the latest drivers and software (such as HyperX NGENUITY), please visit:
HyperX Official Support Website
When contacting support, please have your product model number (77Z46AA) and purchase information ready.
