User Manual for Jawploy 64GB Digital Voice Recorder

1. Introduction

Thank you for choosing the Jawploy 64GB Digital Voice Recorder, Model SK688. This portable recording device is designed for high-quality audio capture in various settings, including lectures, meetings, interviews, and classes. It features a color display, advanced sound clarity, voice-activated recording, and ample storage capacity.

Image: The Jawploy SK688 Digital Voice Recorder, showcasing its sleek design, color display, and control buttons. The device is shown from both front and side angles, highlighting its compact form factor.

2. What's in the Box

Please check the contents of your package to ensure all items are present:

• 1 x JAWPLOY 64GB Voice Recorder (Model SK688)
• 1 x USB Type-C Cable
• 1 x User Manual (this document)

3. Product Overview and Components

Familiarize yourself with the various parts of your voice recorder:

Image: A detailed diagram illustrating the dimensions (4.3 inches height, 1.1 inches width) and key features of the Jawploy voice recorder, including its HD color screen, 64GB memory capacity, and 1536kbps HD recording capability.

Key Components:

• Color Display: Shows recording status, menu options, and file information.
• REC/SAVE Button: Initiates and saves recordings.
• PLAY/PAUSE Button: Starts and pauses playback.
• REW (Rewind) Button: Rewinds during playback, navigates menus.
• FF (Fast Forward) Button: Fast forwards during playback, navigates menus.
• MENU Button: Accesses device settings and options.
• BACK Button: Returns to the previous menu or screen.
• Built-in Microphone: For audio input.
• USB Type-C Port: For charging and data transfer.
• ON/OFF Switch: Powers the device on or off.
• 3.5mm Headphone Jack: For private listening during playback.

4. Setup

4.1 Charging the Device

Before first use, fully charge the voice recorder. The device is equipped with a rechargeable Lithium Ion battery.

1. Connect the included USB Type-C cable to the recorder's USB port.
2. Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
3. The battery indicator on the screen will show charging status. A full charge typically takes a few hours.
4. Once fully charged, disconnect the cable. The device supports up to 20 hours of continuous recording on a full charge.

Image: The voice recorder connected via its USB Type-C port, demonstrating how to charge the device and transfer files to a computer.

4.2 Powering On/Off

• To power on, slide the ON/OFF switch to the "ON" position. The screen will light up.
• To power off, slide the ON/OFF switch to the "OFF" position.

5. Operating Instructions

5.1 Basic Recording

The device offers one-touch recording for ease of use.

1. Ensure the device is powered on.
2. Press the REC/SAVE button to start recording. The screen will display "Recording" and a timer.
3. To stop and save the recording, press the REC/SAVE button again. The file will be saved automatically with a date and time stamp.

Image: A visual guide demonstrating the simple three-step process for one-touch recording: Powering on, pressing the REC button to start, and pressing SAVE to conclude and store the recording.

5.2 Playback

1. From the main menu, navigate to "Recordings" or "Files".
2. Use the REW and FF buttons to select the desired recording.
3. Press the PLAY/PAUSE button to start playback.
4. Press PLAY/PAUSE again to pause.
5. Use REW and FF during playback to rewind or fast forward.
6. To stop playback, press the BACK button.

5.3 Voice Activated Recording (VAR)

This mode saves storage space and battery life by recording only when sound is detected.

1. Go to the MENU.
2. Navigate to "Recording Settings" or "VAR Mode".
3. Select "Voice Activated Recording" and turn it "ON". You may be able to adjust sensitivity levels.
4. Exit the menu. When you press REC/SAVE, the recorder will wait for sound before starting to record. It will pause when quiet and resume when sound is detected again.
5. Press REC/SAVE again to stop and save the recording.

Image: The voice recorder in a simulated meeting environment, demonstrating its voice-activated recording capability, which automatically starts recording when sound is detected and pauses during silence.

5.4 Password Protection

Protect your recordings with a password.

1. Go to the MENU.
2. Navigate to "System Settings" or "Security".
3. Select "Password Setting" and follow the on-screen prompts to set your password.
4. Remember your password. If forgotten, a factory reset may be required, which will erase all data.

Image: The voice recorder's display showing a password entry screen, accompanied by a padlock icon, illustrating the device's password protection feature for securing recorded files.

5.5 A-B Repeat

This function allows you to repeat a specific segment of an audio file.

1. During playback, press the MENU button (or designated A-B button if available) at the desired starting point (A).
2. Press the MENU button again at the desired ending point (B).
3. The segment between A and B will now loop.
4. Press the MENU button a third time to exit A-B repeat mode.

5.6 MP3 Player Functionality

The device can also function as an MP3 player, supporting various music formats.

1. Transfer your music files (e.g., MP3, WAV) to the recorder's "Music" folder via USB connection to a computer.
2. Disconnect the recorder from the computer.
3. From the main menu, navigate to "Music" or "MP3 Player".
4. Select the desired song and press PLAY/PAUSE to begin playback.
5. Use REW and FF to skip tracks or fast forward/rewind within a song.

6. File Management

6.1 Transferring Files to a Computer

You can easily transfer recorded files to your computer for backup or further editing.

1. Connect the voice recorder to your computer using the provided USB Type-C cable.
2. The recorder will appear as a removable disk drive (e.g., "JAWPLOY Recorder") on your computer.
3. Open the drive. Recorded files are typically found in a folder named "RECORD" or similar.
4. Drag and drop files to your computer's folders.
5. Safely eject the device from your computer before disconnecting the USB cable.

6.2 Deleting Files

Files can be deleted directly from the device.

1. From the "Recordings" or "Files" menu, select the file you wish to delete.
2. Press the MENU button.
3. Navigate to "Delete" and confirm your selection.

6.3 Smart File Naming

Recording files are automatically named by date and time (e.g., YYYYMMDD_HHMMSS) for easy organization and retrieval.

7. Specifications

8. Troubleshooting

If you encounter issues with your Jawploy voice recorder, please refer to the following common problems and solutions:

9. Maintenance

• Keep the device dry. Moisture can damage internal circuits.
• Avoid extreme temperatures. Do not expose to direct sunlight or very cold environments.
• Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Avoid dropping or subjecting the device to strong impacts.
• Store the device in a clean, dust-free environment when not in use.
• Charge the battery regularly, even if not in frequent use, to maintain battery health.

10. Warranty and Support

Jawploy products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Jawploy website. If you require technical support or have questions not covered in this manual, please contact Jawploy customer service through the contact information provided on the product packaging or official website.

Please retain your proof of purchase for warranty claims.