Ftoghe 10-inch Android 13 IPS Touchscreen Car Stereo User Manual

1. Introduction

Thank you for choosing the Ftoghe 10-inch Android 13 IPS Touchscreen Car Stereo. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new car stereo system. Please read this manual thoroughly before installation and use to ensure optimal performance and to prevent damage.

This car stereo is designed for specific Mitsubishi models: ASX (2013-2015) and Outlander Sport (2011-2017), including RVR (2011-2017). It features Android 13, Wireless CarPlay, Android Auto, GPS navigation, Bluetooth, Wi-Fi, FM radio, and supports a backup camera.

2. Safety Information

• Professional Installation Recommended: Due to the complexity of car electrical systems, professional installation is highly recommended to avoid damage to the vehicle or the stereo unit.
• Power Disconnection: Always disconnect the vehicle's battery negative terminal before beginning any installation or wiring work.
• Correct Voltage: Ensure the vehicle's electrical system operates at 12V DC (negative ground).
• Wiring: Connect all wires correctly according to the wiring diagram. Incorrect wiring can cause damage or fire.
• Driving Safety: Do not operate the stereo's advanced features or watch videos while driving. Distracted driving can lead to accidents.
• Ventilation: Ensure adequate ventilation around the unit to prevent overheating.
• Water Exposure: Avoid exposing the unit to water or excessive moisture.

3. Package Contents

Verify that all items are present in the package before proceeding with installation.

• Ftoghe 10-inch Car Stereo Unit
• Rear Camera (if included in package)
• RCA Input/Output Cables
• Power Cable Harness
• Camera Input Cable
• GPS Antenna
• Radio Adapter Cable
• 2 x USB Cables
• Original Car USB Cable (if applicable)
• Instruction Manual

Figure 3.1: Product Size and Package List. This image displays the main 10-inch stereo unit and various connection cables, including the rear camera, RCA cables, power cable, GPS antenna, and USB cables.

4. Installation Guide

4.1 Pre-Installation Check

• Confirm vehicle compatibility: Mitsubishi ASX (2013-2015), Outlander Sport (2011-2017), RVR (2011-2017).
• Ensure all package contents are present.
• Disconnect the negative terminal of the car battery.

4.2 Removing the Original Stereo

1. Carefully remove the trim panels surrounding the factory stereo using appropriate trim removal tools to avoid damage.
2. Unscrew the mounting bolts or clips securing the original stereo.
3. Gently pull out the original stereo and disconnect all wiring harnesses and antenna cables from the back.

Figure 4.1: Before and After Installation. This image illustrates the visual transformation of the car's dashboard from the original stereo to the new 10-inch touchscreen unit.

Figure 4.2: Outlander Sport Stereo Installation Example. This image provides a visual reference for the installed stereo in an Outlander Sport vehicle.

4.3 Wiring Connections

Refer to the detailed wiring diagram provided with your unit for specific connections. General connections include:

• Power Harness: Connect the main power harness to the vehicle's wiring. Ensure ACC, B+, and Ground wires are correctly matched.
• Speaker Wires: Connect the speaker output wires to the corresponding vehicle speaker wires. Pay attention to polarity.
• GPS Antenna: Mount the GPS antenna in a location with a clear view of the sky (e.g., dashboard, corner of the windshield) and connect it to the unit.
• USB Cables: Route the USB cables to an accessible location (e.g., glove compartment) for connecting external devices or for CarPlay/Android Auto.
• Backup Camera: Connect the backup camera video input and power wires. The camera's power should typically be connected to the vehicle's reverse light circuit, and the video signal to the "CAM IN" port on the stereo.
• RCA Cables: Connect any external amplifiers or subwoofers using the RCA output cables.
• Steering Wheel Control (SWC): Connect the SWC wires to your vehicle's steering wheel control interface. This may require programming in the unit's settings.

4.4 Mounting the New Stereo

1. Carefully slide the new stereo unit into the dashboard opening, ensuring all wires are tucked away and not pinched.
2. Secure the stereo with the mounting bolts or clips.
3. Reattach the trim panels, ensuring they snap securely into place.

5. Initial Setup

5.1 Power On and Basic Settings

1. Reconnect the car battery's negative terminal.
2. Turn on the vehicle's ignition. The stereo should power on automatically.
3. Follow any on-screen prompts for initial language and time zone settings.
4. Adjust screen brightness in the settings menu for optimal visibility.

5.2 Wi-Fi Connection

1. Go to "Settings" > "Network & Internet" > "Wi-Fi".
2. Turn on Wi-Fi and select your desired network.
3. Enter the password if prompted and connect. This allows for app downloads, online navigation, and system updates.

5.3 Steering Wheel Control (SWC) Learning

If your vehicle has steering wheel controls, you may need to configure them:

1. Navigate to "Settings" > "Steering Learn" or "SWC Settings".
2. Follow the on-screen instructions to assign functions to each button on your steering wheel.

6. Operating Instructions

6.1 Wireless CarPlay & Android Auto

Connect your smartphone wirelessly to access navigation, music, calls, and messages directly on the stereo screen.

1. Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
2. On the stereo, open the "CarPlay" or "Android Auto" application.
3. Search for your stereo's Bluetooth name on your phone and pair.
4. Confirm the pairing on both devices. CarPlay or Android Auto should launch automatically.

Figure 6.1: Wireless CarPlay, Android Auto, and MirrorLink. This image highlights the stereo's capability to connect wirelessly with smartphones for enhanced functionality.

Figure 6.2: CarPlay Interface. This image shows the user interface when Apple CarPlay is active on the stereo screen.

6.2 Bluetooth Connectivity

For hands-free calling and audio streaming:

1. Go to the "Bluetooth" application on the stereo.
2. Enable Bluetooth on your phone and search for available devices.
3. Select the stereo's Bluetooth name (e.g., "AndroidBT") from your phone's list and pair.
4. Once connected, you can make/receive calls and play music wirelessly.

6.3 GPS Navigation

The unit supports online and offline navigation. Ensure the GPS antenna is properly installed.

• Online Navigation: Connect to Wi-Fi or a mobile hotspot to use pre-installed map applications (e.g., Google Maps) or download others from the Play Store.
• Offline Navigation: Download offline maps for your region through a compatible navigation app to use without an internet connection.
• Voice Control: Use voice commands for navigation (e.g., "Navigate to [address]").

Figure 6.3: Voice Control and GPS Navigation. This image demonstrates the integrated GPS navigation system and the voice control feature for hands-free operation.

6.4 FM Radio

Access the "Radio" application to listen to FM broadcasts.

• Auto Scan: Use the auto-scan function to find and save available stations.
• Manual Tuning: Manually tune to specific frequencies.
• Presets: Save your favorite stations for quick access.

6.5 Media Playback

The stereo supports various media sources:

• USB: Connect USB drives to play audio and video files.
• AUX Input: Use the AUX input for external audio devices.
• Bluetooth Audio: Stream music from your paired smartphone.
• Built-in Speaker: The unit can utilize its own speaker or output to car speakers.
• FM Transmitter: Option to transmit audio to your car's existing FM radio.

Figure 6.4: Audio Output Options. This image illustrates the various ways audio can be played through or from the car stereo.

6.6 Backup Camera

When the vehicle is shifted into reverse, the stereo automatically displays the rear camera feed.

• Parking Assistance: Dynamic parking lines may be displayed to assist with parking.
• Waterproof Camera: The included camera is typically IP67 rated for weather resistance.
• Note: The backup camera is for assistance only and does not record video.

Figure 6.5: Backup Camera Display. This image shows the view from the backup camera on the stereo screen, complete with parking guidelines.

6.7 System Settings

Access the "Settings" menu for various customizations:

• Display: Adjust brightness, wallpaper, and screen timeout.
• Sound: Customize audio settings, including equalizer (EQ) presets (Hi-Fi, Bass, Voice, Rock, Classical, Jazz, Pop) and balance/fader.
• Navigation: Select default navigation app.
• General: Set date, time, language, and perform factory resets.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid abrasive cleaners or solvents.
• Software Updates: Periodically check for software updates via Wi-Fi to ensure optimal performance and access to new features.
• Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold for extended periods.

8. Troubleshooting

9. Specifications

10. Warranty Information

The Ftoghe 10-inch Android 13 IPS Touchscreen Car Stereo comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or normal wear and tear.

Please retain your proof of purchase for warranty claims.

11. Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact our customer support team.

• Seller: Lans-us
• Contact Method: You can reach out to the seller directly through the Amazon platform by visiting the "Lans-us" store page and clicking "Ask a question".
• Email: isliyin@163.com

Figure 11.1: Customer Support Information. This image provides visual guidance on how to contact customer support via Amazon or email.