1. Product Overview
The Saker SW-102 is a versatile 6-in-1 multifunctional handheld vacuum cleaner designed for various cleaning tasks in your car, home, and office. It combines vacuuming, blowing, and inflating functions, powered by a high-speed brushless motor for efficient performance.
Image 1.1: Saker SW-102 Portable Vacuum Cleaner with included accessories.
2. Package Contents
Verify that all items listed below are included in your package:
- Car vacuum cleaner (1 unit)
- Floor brush (1 unit)
- HEPA filter (1 unit)
- Storage bag (1 unit)
- Air extraction nozzle (1 unit)
- USB charging cable (1 unit)
- Short blowing nozzle (1 unit)
- Flat suction brush (1 unit)
- Long flat suction (1 unit)
- Pipe blowing round brush (1 unit)
- Long blowing pipe (1 unit)
- Small inflator nozzle (1 unit)
- Large inflator nozzle (1 unit)
- Test tempered glass (1 unit)
Image 2.1: All components of the Saker SW-102 package.
3. Product Features
- 6-in-1 Multifunctionality: Integrates vacuuming, blowing, and inflating capabilities.
- Powerful Suction: Up to 20,000 PA with a high-speed brushless motor and three adjustable suction levels (10KPA/15KPA/20KPA).
- Safety Features: Integrated car window breaker and U-shaped hidden seatbelt cutter for emergency situations.
- Long Battery Life: Built-in 3*2600mAH battery for extended use.
- Dual Charging Interfaces: Type-C port for charging the vacuum and a USB output port to function as a mobile power source.
- HEPA Filter: Equipped with a washable and reusable HEPA filter for efficient dust collection.
Image 3.1: Overview of the Saker SW-102's key features.
4. Setup and Charging
4.1 Initial Charging
Before first use, fully charge the device. Connect the provided USB Type-C charging cable to the Type-C port on the vacuum cleaner and plug the other end into a compatible USB power adapter (not included). The green indicator light will illuminate when charging is complete.
Image 4.1: Charging the Saker SW-102 and using it as a power bank.
4.2 Attaching Accessories
Select the appropriate nozzle or brush for your cleaning task. Attach it firmly to either the suction end (for vacuuming) or the blowing end (for blowing/inflating) of the device. The vacuum is designed for easy attachment and removal of accessories.
5. Operating Instructions
5.1 Power On/Off and Suction Adjustment
Press and hold the power button to turn the vacuum on. Short presses will cycle through the three suction levels (10KPA, 15KPA, 20KPA). The indicator lights will change to reflect the current power mode. Press and hold the power button again to turn the device off.
5.2 Vacuuming Function
Attach the desired suction nozzle (e.g., long flat suction for crevices, flat suction brush for surfaces, floor brush for larger areas) to the front of the vacuum. Turn on the device and select the appropriate suction level. Move the nozzle over the area to be cleaned.
Image 5.1: Demonstrating the powerful suction of the Saker SW-102.
5.3 Blowing Function
Attach a blowing nozzle (e.g., short blowing nozzle, long blowing pipe, pipe blowing round brush) to the rear exhaust port of the vacuum. Turn on the device and use it to blow away dust from keyboards, car vents, or other hard-to-reach areas.
Image 5.2: Using the Saker SW-102 for its dust blowing capabilities.
5.4 Inflating and Air Extraction
For inflating, attach the small or large inflator nozzle to the rear exhaust port. For air extraction (e.g., vacuum storage bags), attach the air extraction nozzle to the rear exhaust port. Turn on the device to activate the function.
Image 5.3: The Saker SW-102's air inflating and extracting functions.
5.5 Emergency Safety Functions
The vacuum includes a car window breaker at the bottom. To use, press it perpendicularly against the glass surface to break the window. The side features a U-shaped hidden seatbelt cutter. To use, position the seatbelt into the cutter and pull firmly to cut the seatbelt. A test tempered glass piece is included for practice.
Image 5.4: Safety features of the Saker SW-102.
6. Maintenance
6.1 Emptying the Dustbin
Regularly empty the dustbin to maintain optimal suction performance. Twist the dustbin counter-clockwise to detach it from the main unit. Dispose of collected debris. Reattach the dustbin by aligning and twisting clockwise until secure.
6.2 Cleaning the HEPA Filter
The HEPA filter should be cleaned every 2-3 months or as needed. Remove the filter from the dustbin. Use the included brush to remove loose debris. The filter can also be rinsed under running water. Ensure the filter is completely dry before reinserting it into the dustbin and reattaching it to the vacuum.
Image 6.1: Instructions for cleaning the reusable HEPA filter.
7. Specifications
- Brand: Saker
- Model Name: SW-102 Car Vacuum
- Special Features: Cordless, HEPA, Portable, Washable Filter
- Filter Type: HEPA Filter
- Power: 120 watts
- Suction Power: Up to 20,000 PA (3 levels: 10KPA/15KPA/20KPA)
- Battery: 3 Lithium Ion batteries (included), 7800mAH capacity
- Battery Life: Approximately 40 minutes
- Charging: USB Type-C
- Connectivity: USB (for charging out)
- Capacity: 0.2 Liters
- Product Dimensions: 6.5"L x 2.7"W x 8.5"H
- Item Weight: 1.4 pounds
- Recommended Uses: Car, Floor, Home, Office
8. Troubleshooting
- No Power: Ensure the device is fully charged. Check the charging cable and adapter.
- Weak Suction: Empty the dustbin. Clean or replace the HEPA filter. Ensure all attachments are securely fitted.
- Device Not Charging: Verify the USB Type-C cable is correctly inserted into both the vacuum and the power source. Check if the power source is active.
- Unusual Noise: Check for any obstructions in the nozzles, dustbin, or filter.
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Saker website. Keep your purchase receipt for warranty claims.
10. Official Product Video
Video 10.1: Official Saker product video demonstrating the 6-in-1 handheld car vacuum cleaner's features and usage.
