MAST TATTOO WQP-054
Mast Y22 Pro Wireless Tattoo Pen Machine User Manual
Comprehensive instructions for setup, operation, and maintenance of your Mast Y22 Pro Tattoo Machine.
Introduction
The Mast Y22 Pro is a lightweight and versatile wireless tattoo pen machine designed for comfort and precise control. It features dual operating modes (voltage and frequency), a powerful MCORE motor, and a long-lasting 1300mAh battery. This manual provides essential information to ensure safe and effective use of your device.
Figure 1: Mast Y22 Pro Wireless Tattoo Pen Machine overview.
Figure 2: The Y22 Pro features an enhanced power configuration with a next-gen MCORE motor for greater force and coloring efficiency.
Package Contents
Upon opening the package, ensure all items are present:
- 1 x Mast Y22 Pro Tattoo Machine
- 1 x USB-C Cable
- 1 x User Manual (this document)
Video 1: Unboxing the Mast Y22 Pro Tattoo Pen Machine. This video demonstrates the contents of the package and initial handling of the device.
Setup
1. Charging the Device
The Mast Y22 Pro is equipped with a 1300mAh battery. For optimal performance, fully charge the device before first use.
- Connect the provided USB-C cable to the charging port located at the base of the machine.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included).
- The display will indicate charging status. A full charge takes approximately 3.5 hours.
- A fully charged battery provides up to 7 hours of continuous operation.
Figure 3: The Mast Y22 Pro features a built-in 1300mAh high-capacity battery, charged via a Type-C port.
2. Attaching a Cartridge Needle
The Mast Y22 Pro is compatible with all standard cartridge needles.
- Gently insert the cartridge needle into the machine's grip, ensuring it is securely seated.
- Twist the grip to adjust the needle depth as required for your tattooing technique.
Video 2: Demonstration of how to attach a needle cartridge and adjust needle length on the Mast Y22 Pro Tattoo Machine.
Operating Instructions
1. Power On/Off
Press and hold the power button (usually located at the top or side of the display) to turn the machine on or off.
2. Switching Operating Modes
The Mast Y22 Pro offers two operating modes: Voltage Mode and Frequency Mode.
- Voltage Mode: Allows adjustment of voltage from 2V to 12V.
- Frequency Mode: Allows adjustment of frequency across 10 steps (3Hz, 5Hz, 7Hz, 9Hz, 12Hz, 16Hz, 22Hz, 32Hz, 48Hz, 90Hz).
- Double-click the power button to switch between Voltage Mode and Frequency Mode.
Figure 4: The Mast Y22 Pro features dual operating modes for voltage and frequency adjustment.
3. Adjusting Settings
Use the '+' and '-' buttons on the device to increase or decrease the voltage or frequency, depending on the selected mode. Long-press for quick adjustments.
4. Wireless Connectivity
The Mast Y22 Pro supports wireless connectivity for enhanced control. The first connection requires pairing; subsequent startups will automatically connect.
Figure 5: The Mast Y22 Pro supports smart wireless connectivity for convenient operation.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Mast Y22 Pro.
- Cleaning: After each use, wipe down the machine's exterior with a sterile wipe or a soft cloth dampened with a suitable disinfectant. Avoid getting liquids inside the device.
- Storage: Store the machine in a clean, dry place away from direct sunlight and extreme temperatures.
- Needle Disposal: Always dispose of used cartridge needles in a designated sharps container according to local regulations.
- Battery Care: Do not expose the battery to high temperatures or attempt to disassemble it. Charge regularly to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on. | Low or depleted battery. | Charge the machine fully using the provided USB-C cable. |
| Needle not extending/retracting properly. | Improperly seated cartridge or grip adjustment. | Ensure the cartridge is fully inserted. Adjust the grip by twisting to set needle depth. |
| Inconsistent power/motor performance. | Low battery or internal issue. | Recharge the battery. If the issue persists, contact customer support. |
| Display not working. | Device off or internal display issue. | Ensure the device is powered on. If still unresponsive, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | WQP-054 |
| Weight | 126 g |
| Length | 146 mm |
| Grip Diameter | 26 mm |
| Stroke Length | 3.0 mm |
| Motor Speed | 12V/10000rpm (MCORE motor) |
| Battery Capacity | 1300mAh |
| Operating Time | Up to 7 hours (on full charge) |
| Charging Time | Less than 3.5 hours |
| Charging Port | USB-C |
| Voltage Range | 2V–12V |
| Frequency Settings | 3Hz, 5Hz, 7Hz, 9Hz, 12Hz, 16Hz, 22Hz, 32Hz, 48Hz, 90Hz (10 steps) |
| Needle Compatibility | All standard cartridge needles |
Figure 6: Detailed technical specifications of the Mast Y22 Pro Tattoo Machine.
Warranty
The Mast Y22 Pro Tattoo Machine comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please contact MAST TATTOO customer service through the retailer where the product was purchased or visit the official MAST TATTOO website.
Online Resources:
- MAST TATTOO Amazon Store
- Refer to the included manual for additional information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.