1. Introduction
Thank you for choosing the ANCEL IR101 Thermal Camera Extension Cable. This cable is designed to facilitate the connection of thermal imaging devices with a Type-C male connector to compatible Apple iPhone and iPad iOS devices that feature a Lightning port. It ensures a stable and reliable connection for your thermal imaging applications.
This manual provides essential information on the product's features, setup, operation, and maintenance to ensure optimal performance and longevity.
2. Package Contents
- 1 x ANCEL Thermal Camera Extension Cable
3. Product Overview
The ANCEL IR101 cable features a Type-C male connector on one end and a Lightning female port on the other. This design allows for seamless integration between thermal imaging devices (typically with a Type-C output) and Apple iOS devices (with a Lightning input).
Figure 1: ANCEL IR101 Thermal Camera Extension Cable. This image displays the ANCEL IR101 extension cable. It features a black cable with a USB-C male connector on one end and a Lightning female port on the other, designed to connect thermal imaging devices to compatible iOS devices.
4. Setup Instructions
- Connect to Thermal Imaging Device: Insert the Type-C male connector of the ANCEL IR101 cable into the Type-C port of your thermal imaging device. Ensure the connection is firm.
- Connect to iOS Device: Insert the Lightning male connector of your Apple iPhone or iPad into the Lightning female port of the ANCEL IR101 cable.
- Verify Connection: Once both ends are connected, your thermal imaging device should be recognized by your iOS device. You may need to open the specific application for your thermal camera on your iOS device to confirm the connection and begin operation.
Compatibility Note: This cable is designed for iOS devices with a Lightning port, such as iPhone 15, iPhone 16, and newer models that utilize the Lightning interface for accessory connections. It is specifically for connecting thermal cameras that output via USB-C to these Lightning-equipped iOS devices.
5. Operating Instructions
The ANCEL IR101 cable acts as a passive adapter, facilitating the physical connection between your thermal imaging device and your iOS device. Its operation is straightforward:
- Ensure both the thermal imaging device and the iOS device are powered on.
- Connect the cable as described in the "Setup Instructions" section.
- Launch the dedicated application for your thermal imaging camera on your iOS device. The application should automatically detect the connected thermal camera.
- Refer to the user manual of your specific thermal imaging device and its accompanying iOS application for detailed operating procedures, image capture, analysis, and settings.
6. Maintenance
To ensure the longevity and proper functioning of your ANCEL IR101 cable, follow these maintenance guidelines:
- Cleaning: Gently wipe the cable and connectors with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply, which can damage internal wires.
- Handling: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling directly on the cable itself to prevent damage to the connectors or cable strain relief.
- Protection: Keep the connectors free from dust, dirt, and moisture. Consider using protective caps if the cable is stored for extended periods.
7. Troubleshooting
If you encounter issues while using the ANCEL IR101 cable, refer to the following common troubleshooting steps:
| Problem | Possible Cause / Solution |
|---|---|
| Thermal camera not recognized by iOS device. |
|
| Intermittent connection. |
|
If the problem persists after attempting these steps, please contact ANCEL customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ANCEL |
| Model Number | ANCEL IR101 |
| Connector Type | USB Type-C (Male) to Lightning (Female) |
| Cable Type | Extension/Adapter Cable |
| Compatible Devices | Thermal Imaging Devices with Type-C output, Apple iPhone/iPad iOS Devices with Lightning port (e.g., iPhone 15, iPhone 16) |
| Package Dimensions | 1.9 x 1.1 x 0.8 inches |
| Item Weight | 0.3 ounces |
| Manufacturer | ANCEL |
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ANCEL website. You can also contact ANCEL customer service directly for assistance with product inquiries, troubleshooting, or warranty claims.
Please have your product model number (IR101) and purchase details ready when contacting support.
