1. Introduction
Thank you for choosing the Klarstein Ventimate 60cm Drawer Hood. This appliance is designed to efficiently remove cooking odors and steam from your kitchen, ensuring a fresh and clean environment. Featuring a modern touch control panel, three fan speeds, and versatile operation modes (extraction or recirculation), this hood combines performance with user-friendly design. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance.
2. Safety Instructions
To prevent personal injury or damage to the appliance, please observe the following safety precautions:
- Ensure the power supply matches the voltage specified on the rating label.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the hood if the power cord or plug is damaged.
- Always disconnect the appliance from the power supply before cleaning or maintenance.
- Maintain a minimum distance between the hood and the cooking surface as specified in the installation section.
- Regularly clean grease filters to prevent fire hazards.
- Do not flambé under the range hood.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Ensure adequate ventilation in the room when the range hood is used simultaneously with appliances burning gas or other fuels.
3. Package Contents
Verify that all components are present and undamaged:
- Klarstein Ventimate Drawer Hood unit
- Aluminum grease filter(s)
- Carbon odor filter(s) (for recirculation mode)
- Mounting hardware (screws, brackets, etc.)
- Instruction Manual
4. Technical Specifications
| Brand | Klarstein |
| Model Number | TK15_Ventimate_60BK |
| Dimensions (L x W x H) | 29 x 59.8 x 30.5 cm |
| Weight | 11 kg |
| Airflow Capacity | Up to 390 m³/h |
| Noise Level | 53-64 dB |
| Energy Efficiency Class | A+ |
| Control Type | Touch Panel |
| Number of Speeds | 3 |
| Lighting | 3.5W LED, 6500K |
| Filter Type | Aluminum Grease Filter, Carbon Odor Filter |
| Ventilation Type | Ductless/Recirculating |
| Material | Aluminum |
| Color | Black |
5. Installation
The Klarstein Ventimate drawer hood is designed for integration into a 60cm wide kitchen cabinet. Careful measurement is crucial for proper fit. Due to the precise dimensions, ensure your cabinet's internal width accommodates the hood without obstruction. If you are unsure about the installation process, it is recommended to consult a professional installer.
5.1 Mounting the Hood
- Prepare the Cabinet: Ensure the cabinet opening is correctly sized for the hood (approx. 59.8 cm width).
- Determine Installation Height: For optimal performance, the hood should be installed at a specific distance above the cooking surface. A common recommendation is 60-65 cm (23.6-25.6 inches) above electric hobs and 65-75 cm (25.6-29.5 inches) above gas hobs. Installing too high may reduce extraction efficiency.
- Secure the Hood: Insert the hood into the cabinet opening. Use the provided mounting hardware to secure the hood firmly to the cabinet structure. Refer to the detailed diagrams in the printed manual for specific screw locations and bracket usage.
- Connect Ducting (Extraction Mode): If using extraction mode, connect appropriate ducting (not included) from the hood's outlet to an external vent. Ensure the ducting is as short and straight as possible for maximum efficiency.
- Install Carbon Filters (Recirculation Mode): If using recirculation mode, ensure the carbon filters are correctly installed. These filters purify the air before returning it to the kitchen.
- Electrical Connection: Connect the hood to a suitable power outlet. Ensure the connection is secure and meets all electrical safety standards.
Important Note: Some users have reported challenges with cabinet fit and securing the hood. Double-check all measurements and ensure the hood is stable before final use. The provided instructions for securing the hood may require careful attention to detail.
This image displays the Klarstein Ventimate 60cm drawer hood in black, viewed from below and slightly to the side. The extendable panel is pulled out, revealing the touch control interface with illuminated symbols for power, fan speed, and lighting. The LED lights are visible on the underside of the hood, and the metallic grease filter is partially visible behind the panel.
6. Operation
The Klarstein Ventimate hood features an intuitive touch control panel located on the extendable front flap.
6.1 Basic Functions
- Extend the Flap: Gently pull the front panel of the hood outwards to activate the appliance and reveal the touch controls.
- Power On/Off: Touch the power symbol (O) to turn the hood on or off.
- Fan Speed Adjustment: Use the '+' and '-' symbols to cycle through the three available fan speeds (1, 2, 3). The current speed will be displayed.
- LED Lighting: Touch the light bulb symbol (💡) to turn the integrated LED lighting on or off. The 6500K LED lights provide clear illumination of your cooking area.
- Retract the Flap: Push the front panel back into the cabinet to turn off the hood and conceal the controls.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your hood.
7.1 Cleaning the Grease Filters
The aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain extraction efficiency.
- Disconnect Power: Always switch off and unplug the hood before cleaning.
- Remove Filters: Locate the release latches on the grease filters and carefully remove them.
- Clean Filters: The aluminum grease filters are dishwasher-safe. Alternatively, wash them by hand in hot water with a mild detergent. Rinse thoroughly and allow them to dry completely before reinstallation.
- Reinstall Filters: Insert the dry filters back into their slots, ensuring they click securely into place.
7.2 Replacing Carbon Odor Filters (Recirculation Mode)
If your hood is operating in recirculation mode, the carbon odor filters need to be replaced periodically (typically every 3-6 months, depending on usage and cooking habits). These filters cannot be washed.
- Disconnect Power: Switch off and unplug the hood.
- Remove Grease Filters: Follow the steps above to remove the aluminum grease filters.
- Remove Old Carbon Filters: The carbon filters are usually attached to the motor housing. Follow the specific instructions in your printed manual to detach them.
- Install New Carbon Filters: Attach the new carbon filters, ensuring they are securely fitted.
- Reinstall Grease Filters: Place the aluminum grease filters back into position.
7.3 Cleaning the Exterior
Wipe the exterior surfaces of the hood with a soft cloth dampened with mild detergent. Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
8. Troubleshooting
Before contacting customer support, please check the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on | No power supply; Flap not extended; Power button not pressed | Check power connection; Fully extend the front flap; Press the power symbol on the touch panel. |
| Insufficient suction power | Grease filters clogged; Carbon filters saturated (recirculation mode); Incorrect installation height; Obstruction in ducting (extraction mode) | Clean grease filters; Replace carbon filters; Ensure hood is installed at 60-65 cm above cooking surface; Check ducting for blockages. |
| Excessive noise | Loose components; Obstruction in fan; Ducting issues (extraction mode) | Check for loose screws or parts; Ensure no foreign objects are in the fan area; Verify ducting is properly installed and not vibrating. Note that some noise is normal during operation. |
| LED lights not working | Light button not pressed; Faulty LED module | Press the light symbol on the touch panel; If issue persists, contact customer support for replacement. |
9. Warranty and Support
Klarstein products are manufactured with quality and reliability in mind. For warranty information, please refer to the warranty card included with your purchase or visit the official Klarstein website. If you encounter any issues that cannot be resolved using the troubleshooting guide, or require spare parts, please contact Klarstein customer support or your authorized dealer for assistance.
Manufacturer: Klarstein
Website: www.klarstein.com
