Roxicosly RGB Vibrating Alarm Clock with Bed Shaker

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Roxicosly RGB Vibrating Alarm Clock with Bed Shaker, Model CR1001EMR. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Image: Roxicosly RGB Vibrating Alarm Clock with Bed Shaker, displaying the time with colorful digits, alongside the bed shaker and a smartphone connected for charging.

Setup

1. Power Connection

• Connect the provided power adapter to the DC 5V input port on the back of the alarm clock.
• Plug the power adapter into a standard electrical outlet. The clock requires continuous AC power to operate.
• For memory function during power outages, insert two AAA batteries (not included) into the battery compartment on the back of the clock. These batteries will maintain time and alarm settings but will not power the display or vibrator.

Image: Rear view of the alarm clock, illustrating the battery compartment for AAA batteries and the power input port.

2. Connecting the Bed Shaker

• Plug the bed shaker's cable into the dedicated shaker port on the back of the alarm clock.
• Place the bed shaker under your pillow or mattress for optimal vibration.

Operating Instructions

1. Setting the Time

1. Press and hold the TIME button to enter time setting mode. The hour digits will flash.
2. Use the + or - buttons to adjust the hour.
3. Press the TIME button again to set the minutes. Use + or - to adjust the minutes.
4. Press TIME once more to confirm and exit.
5. To switch between 12-hour and 24-hour format, press the 12/24H button. The AM/PM indicator will show in 12-hour format.
6. To activate or deactivate Daylight Saving Time (DST), press the DST button. The DST indicator will appear when active.

2. Setting Alarms (Dual Alarms)

The clock features two independent alarms (AL1 and AL2) that can be set for different schedules.

1. Press and hold the AL1 or AL2 button to enter alarm setting mode. The hour digits will flash.
2. Use the + or - buttons to adjust the alarm hour.
3. Press the AL1 or AL2 button again to set the alarm minutes. Use + or - to adjust.
4. Press the AL1 or AL2 button again to select the alarm period:
   • MON-SUN (Every day)
   • MON-FRI (Weekdays)
   • SAT-SUN (Weekends)
5. Press AL1 or AL2 once more to confirm and exit. The corresponding alarm icon will appear on the display.
6. To activate/deactivate an alarm, short press the AL1 or AL2 button. The alarm icon will appear/disappear.

Image: Alarm clock showing the dual alarm settings, including options for Mon-Sun, Mon-Fri, and Sat-Sun schedules.

3. Wake-up Modes and Volume/Vibration Adjustment

The alarm clock offers three wake-up modes:

• Buzzer Only: The clock will sound an audible alarm.
• Bed Shaker Only: The connected bed shaker will vibrate.
• Buzzer + Bed Shaker: Both the audible alarm and bed shaker will activate simultaneously.

To select a wake-up mode, use the VIB/BUZ switch on the back of the clock.

• Vibration Intensity: Adjust the 3-level vibration intensity (HIGH-MIDDLE-LOW) using the switch on the back of the clock.
• Alarm Volume: Adjust the 5-level alarm volume using the VOL button.

Image: Display illustrating the three available wake-up modes (buzzer, shaker, or both), along with controls for adjusting vibration intensity and alarm volume.

4. Snooze Function

• When the alarm sounds, press the large SNOOZE/OK button to temporarily silence the alarm for 9 minutes.
• To turn off the alarm for 24 hours, short press the active AL1 or AL2 button.
• To permanently turn off an alarm, long press the active AL1 or AL2 button until the alarm icon disappears.

Image: Alarm clock featuring a prominent snooze button and a USB charging port actively charging a smartphone.

5. RGB Display and Dimmer

• RGB Color Modes: Press the RGB button to cycle through 10 RGB color modes, including 6 basic colors and 4 dynamic color transitions.
• Display Brightness: The screen brightness is 7-level adjustable. Press the DIMMER button to cycle through brightness levels.
• At the lowest brightness level (level 1), the "LOW DIMMER" icon will appear for 20 seconds and then disappear, providing a completely dark display for sleeping.

Image: The alarm clock showcasing its 10 RGB display modes, including dynamic color changes and static color options like white, red, green, blue, ice blue, and purple.

Image: The alarm clock highlighting its large digital display and demonstrating the seven adjustable brightness levels.

6. USB Charging Port

The alarm clock includes a USB output port (5V/1A) on the back, allowing you to charge compatible mobile devices. Connect your device's charging cable to this port.

Maintenance

• To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the clock is unplugged before cleaning.
• Replace the AAA backup batteries annually or as needed to ensure memory function during power interruptions.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Roxicosly customer service directly. Contact details can typically be found on the product packaging or the official Roxicosly website.

Manufacturer: Wuhan Wismco E-commerce Co., Ltd.