EWA Eco-Wood-Art FERDINAND

Download PDF
Contents

EWA Eco-Wood-Art Ferdinand Retro Car 3D Wooden Mechanical Puzzle

Model: FERDINAND

Brand: EWA Eco-Wood-Art

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your EWA Eco-Wood-Art Ferdinand Retro Car 3D Wooden Mechanical Puzzle. This model is a meticulously designed replica of a 1920s-1940s era automobile, featuring a functional wind-up mechanism and intricate details.

The kit consists of 278 high-quality plywood parts designed for glue-free self-assembly. Upon completion, the assembled model measures approximately 280 x 96 x 90 mm.

Assembled EWA Eco-Wood-Art Ferdinand Retro Car 3D wooden puzzle, front-side view.

Figure 1.1: The fully assembled EWA Eco-Wood-Art Ferdinand Retro Car, showcasing its classic design and intricate details.

2. Safety Warnings

WARNING:

  • This product contains small parts that can be swallowed. Keep out of reach of small children.
  • Recommended age for assembly is 14 years and older.
  • Exercise caution when handling wooden parts to avoid splinters.

3. Package Contents

Your EWA Eco-Wood-Art Ferdinand Retro Car kit includes:

  • 278 precision-cut plywood pieces for assembly.
  • Detailed graphical assembly instructions.
  • A metal spring for the wind-up mechanism.
  • A suitcase-shaped key for winding.
A hand demonstrating the assembly of a wooden component on the underside chassis of the Ferdinand model.

Figure 3.1: Example of a wooden component during the assembly process.

4. Setup and Assembly Instructions

The Ferdinand Retro Car is designed for glue-free assembly. Follow the included detailed graphical instructions carefully for the best results. Assembly typically takes approximately 4 hours, but this can vary based on individual experience.

  1. Unpack Components: Carefully remove all plywood sheets from the packaging. Identify the different sheets and parts.
  2. Prepare Parts: Gently detach each piece from its wooden frame. Use a small tool or your fingers to carefully push them out. If a piece is stubborn, a craft knife can be used with caution.
  3. Follow Instructions: Refer to the step-by-step diagrams in the provided instruction booklet. Each step illustrates which pieces to connect and how.
  4. Connect Pieces: Align the tabs and slots of the wooden pieces and press them together firmly. Some connections may require a gentle wiggle or slight pressure.
  5. Mechanical Components: Pay close attention when assembling the internal gear system and the wind-up mechanism. Ensure all gears rotate freely before proceeding to the next step.
Underside view of the Ferdinand Retro Car, revealing the intricate gear system and mechanical components.

Figure 4.1: The intricate gear system and mechanical components visible from the underside of the model.

Tip: Keep a small piece of sandpaper handy for any rough edges, though the pieces are generally well-finished. Do not force pieces together; if they don't fit, double-check the instructions and the orientation of the parts.

5. Operating Instructions

The Ferdinand Retro Car features a functional wind-up mechanism that allows it to move independently.

  1. Winding the Mechanism: Locate the winding key on the side of the car. Insert the suitcase-shaped key and turn it clockwise to wind the metal spring. Do not overwind.
  2. Activating Movement: Once wound, place the car on a flat, smooth surface. Release the mechanism to allow the car to move forward.
  3. Front Wheel Positions: The front wheels have three fixed positions, allowing for straight movement or gentle turns. Adjust them manually before winding the car.
  4. Engine Detail: The hood can be opened to reveal a detailed four-cylinder engine model. This is for display and does not affect the car's movement.
A hand winding the spring mechanism on the side of the Ferdinand Retro Car to activate its movement.

Figure 5.1: Winding the mechanical spring using the provided key.

Close-up view of the four-cylinder engine mechanism located under the hood of the Ferdinand model.

Figure 5.2: The detailed four-cylinder engine under the hood.

6. Maintenance

  • Cleaning: Dust the model regularly with a soft, dry cloth. Avoid using water or chemical cleaners, as they may damage the wood.
  • Storage: Store the model in a dry environment, away from direct sunlight and extreme temperature fluctuations, to prevent warping or damage to the wood.
  • Moving Parts: Ensure all moving parts, especially gears and axles, remain free of dust and debris to maintain smooth operation of the mechanism.

7. Troubleshooting

If your Ferdinand Retro Car is not functioning as expected, consider the following:

  • Mechanism Not Moving:
    • Ensure the spring is fully wound (but not overwound).
    • Check for any obstructions in the gear system or wheels.
    • Verify that all parts of the mechanism are correctly assembled and aligned according to the instructions.
  • Parts Not Fitting:
    • Double-check the instruction diagrams to ensure you are using the correct pieces and orientation for each step.
    • Do not force pieces. If a piece is too tight, gently sand the edges slightly.

8. Specifications

FeatureDetail
Model NameFERDINAND
BrandEWA Eco-Wood-Art
MaterialHigh-quality Plywood
Number of Pieces278
Assembly RequiredYes (Glue-free)
Batteries RequiredNo
Assembled Dimensions (L x W x H)280 x 96 x 90 mm (11.02 x 3.78 x 3.54 inches)
Recommended Age14 years and older
Educational GoalsMemory skills, Logical thinking, Pattern recognition, Problem-solving, Spatial awareness

9. Warranty and Support

For information regarding warranty, replacement parts, or further support, please refer to the documentation included with your product or visit the official EWA Eco-Wood-Art website.

Official Website: Eco-Wood-Art Official Website

YouTube Channel: EWA Eco-Wood-Art YouTube Channel

10. Additional Product Views

Front view of the assembled EWA Eco-Wood-Art Ferdinand Retro Car.

Figure 10.1: Front view of the Ferdinand Retro Car.

Rear view of the assembled Ferdinand Retro Car, featuring a small, detachable suitcase.

Figure 10.2: Rear view with detachable suitcase.

Detailed view of the interior of the Ferdinand Retro Car, showing the steering wheel and dashboard.

Figure 10.3: Interior view with steering wheel.

A hand opening the rear trunk of the Ferdinand Retro Car, revealing the small wooden suitcase inside.

Figure 10.4: Opening the trunk to reveal the suitcase.

11. Packaging Details

Front packaging of the EWA Eco-Wood-Art Ferdinand 3D Wooden Mechanical Model Kit, showing the assembled car and key features.

Figure 11.1: Front view of the product packaging.

Back packaging of the EWA Eco-Wood-Art Ferdinand kit, detailing assembly time, complexity, and other available models.

Figure 11.2: Back view of the product packaging, showing assembly details and other models.

© 2024 EWA Eco-Wood-Art. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.