Introduction
Thank you for choosing the LIKIMIO Barn Door Wardrobe. This manual provides essential information for the safe assembly, proper use, and maintenance of your new wardrobe. Please read these instructions carefully before beginning assembly and retain them for future reference.
This wardrobe is designed to offer durable and stable storage with an anti-tipping mechanism for enhanced safety. It features a spacious interior with two barn doors, a drawer, a hanging rod, and five side storage shelves, complemented by a full-length mirror.
Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury or property damage.
- Anti-Tipping Device: This wardrobe includes an anti-tipping device. It is crucial to install this device securely to a wall stud to prevent the wardrobe from tipping over, especially in households with children or pets.
- Assembly: Assemble the wardrobe on a soft, clean surface to prevent scratches. Ensure all parts are correctly aligned and tightened according to the instructions. Do not overtighten screws.
- Weight Capacity: Do not exceed the maximum weight capacity of 500 lbs (approximately 227 kg) for the entire unit. Distribute weight evenly across shelves and hanging rods.
- Mirror Handling: Exercise extreme caution when handling the mirror during assembly. It is fragile and can break. Ensure it is securely fastened.
- Children Safety: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the wardrobe.
- Placement: Place the wardrobe on a level, stable surface. Avoid placing it near heat sources or in direct sunlight to prevent material degradation.
Package Contents
Before assembly, verify that all components listed in the assembly instructions are present and undamaged. Each board and screw is typically labeled for easy identification.
Note: A detailed parts list will be included in your physical assembly manual.
Setup and Assembly
Assembly is designed to be straightforward with labeled parts and clear instructions. It is recommended to have two people for assembly, especially for larger components and lifting.
Tools Required (Not Included):
- Phillips Head Screwdriver
- Hammer (for dowels and back panel nails)
- Drill (for anti-tipping device wall attachment)
- Level
Assembly Steps:
- Unpack and Organize: Carefully unpack all components and lay them out on a soft, clean surface. Group similar parts and identify them using the labels.
- Assemble Base Frame: Follow the numerical sequence in your provided manual to connect the base panels. Ensure all cam locks and screws are tightened.
- Attach Side Panels: Secure the side panels to the base. Pay close attention to the orientation of panels with pre-drilled holes for shelves and the mirror.
- Install Shelves and Dividers: Insert the fixed and adjustable shelves into their designated slots.
- Assemble Drawers: Construct the drawer boxes, ensuring the slides are correctly oriented for smooth operation.
- Install Drawer into Frame: Slide the assembled drawers into their respective compartments.
- Attach Back Panels: Secure the back panels to the wardrobe frame. Ensure they are flush and square.
- Mount Doors: Attach the barn doors to the main frame using the provided hinges. Adjust hinges as needed for proper door alignment.
- Install Hanging Rod: Place the hanging rod inside the main compartment.
- Secure Mirror: Carefully attach the full-length mirror. Important: Some users have reported the mirror detaching. Ensure all fasteners for the mirror are extremely secure. Consider using additional adhesive or fasteners if necessary for long-term stability.
- Install Anti-Tipping Device: This is a critical safety step. Securely attach the anti-tipping strap or bracket to the top rear of the wardrobe and then to a wall stud using appropriate hardware.
- Attach Handles and Hooks: Install the door handles, drawer pulls, and any external hooks.
Image: Overall dimensions and internal measurements of the LIKIMIO Barn Door Wardrobe. This diagram shows the height, width, depth, and internal compartment sizes, including the hanging space, drawer, and side shelves.
Image: View of the main wardrobe compartment with barn doors open, showcasing the hanging rod and internal shelves for clothes and accessories.
Operating Instructions
Using the Wardrobe:
- Barn Doors: Gently slide the barn doors open and closed using the handles. Avoid forcing them to prevent damage to the tracks or doors.
- Drawers: Pull drawers open and push them closed smoothly. Do not overload drawers to ensure easy operation and prevent damage to the slides.
- Hanging Rod: Use the hanging rod for clothes hangers. Do not exceed the recommended weight for the rod to prevent bending or detachment.
- Storage Shelves: Utilize the internal and side shelves for folded clothing, accessories, shoes, or decorative items. Distribute weight evenly.
- Full-Length Mirror: The integrated mirror is for checking outfits. Avoid leaning on it or applying excessive force.
- Side Hooks: The two external hooks can be used for hanging bags, hats, or other lightweight items.
Image: Detailed view of the five-tier cubby shelves located on the side of the wardrobe, suitable for displaying or storing various items.
Image: A person standing in front of the full-length mirror integrated into the wardrobe, demonstrating its utility for daily use.
Image: Close-up view of a fully extendable drawer within the wardrobe, showing its capacity for folded garments or other personal items.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Dusting: Regularly dust the wardrobe to prevent buildup.
- Hardware Check: Periodically check all screws, bolts, and fasteners to ensure they are tight. Retighten if necessary, but do not overtighten.
- Mirror Care: Clean the mirror with a glass cleaner and a soft, lint-free cloth.
- Avoid Moisture: Protect the wardrobe from excessive moisture and humidity, which can cause warping or damage to the engineered wood.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wardrobe feels wobbly or unstable. | Screws are loose; not on a level surface; anti-tipping device not installed. | Ensure all fasteners are tightened. Move to a level surface. Crucially, install the anti-tipping device securely to a wall stud. |
| Drawers do not slide smoothly. | Drawer slides misaligned; drawer overloaded; debris in tracks. | Check drawer slide alignment and re-adjust if necessary. Reduce drawer contents. Clean tracks. |
| Doors are misaligned or do not close properly. | Hinges are loose or improperly adjusted. | Adjust the door hinges using a screwdriver until the doors are properly aligned and close smoothly. |
| Mirror detaches or feels loose. | Inadequate fastening during assembly. | Re-secure the mirror using all provided fasteners. Consider using additional strong adhesive or mirror clips for enhanced security, especially if the wardrobe is in a high-traffic area or a home with children. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LIKIMIO |
| Model Number | HK-YG-03 |
| Color | White |
| Material | Engineered Wood (MDF) |
| Overall Dimensions (L x W x H) | 48.3P x 95.3l x 177.8H centimeters (Approx. 19"D x 37.5"W x 70"H) |
| Maximum Weight Capacity | 500 Pounds (Approx. 227 kg) |
| Special Features | Side storage shelves, Full-length mirror, Anti-tipping device |
| Assembly Type | Freestanding |
