Introduction
This manual provides essential information for the safe and effective use of your HoMedics Modulair Compression Foot Wrap Massager. This device is designed to provide overlapped compression therapy to your feet, offering various massage programs, adjustable intensity, and heat settings. Please read all instructions carefully before use and retain this manual for future reference.
Important Safety Information
Failure to follow these safety instructions may result in injury or damage to the product.
- May cause burns if used with heat settings for extended periods.
- Do not use if you have any circulatory issues or are pregnant.
- Keep away from water.
- Unplug when not in use.
- Always follow the instructions provided in the manual.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Package Contents
Your HoMedics Modulair Compression Foot Wrap Massager package includes:
- 1 x HoMedics Modulair Compression System Foot Wrap
- 1 x Instruction Bulletin (this document)
- 2-Year Limited Warranty information
Note: The universal controller and battery are sold separately and are required for operation.
Setup
- Charge the Universal Controller: Ensure your HoMedics Modulair Universal Controller (sold separately) is fully charged before use. The controller typically offers an ample 5-hour runtime.
- Attach the Controller: Locate the designated slot on the Foot Wrap. Carefully align and click the universal controller into this slot. The SMRTflex chip within the controller powers the compression relief.
- Wear the Foot Wrap: Place your foot inside the wrap. Secure the wrap snugly around your foot using the adjustable fasteners. Ensure it is comfortable but firm enough for effective compression.
Image: Woman attaching the universal controller to the HoMedics Modulair Foot Wrap. The controller is designed to easily click into place, enabling the compression therapy.
Image: This close-up image displays the HoMedics Modulair Foot Wrap fitted onto a foot, illustrating its ergonomic design intended to provide relief from foot pain.
Operating Instructions
- Power On: Press the power button on the universal controller to turn on the device.
- Select Massage Program: The Foot Wrap offers 4 air compression massage programs: alternating, sequential, pulsing, and full. Use the program selection button on the controller to cycle through these options. A full inflation and deflation cycle typically takes 20-30 seconds.
- Adjust Intensity: Use the intensity control buttons on the controller to adjust the compression strength to your preference.
- Activate Heat Settings: The device features 3 soothing heat settings. Press the heat button on the controller to activate and cycle through the low, medium, and high heat options.
- Power Off: Press and hold the power button to turn off the device when finished.
Image: A woman is shown relaxing on a couch with the HoMedics Modulair Foot Wrap. The image highlights key features: 4 air compression programs, a cordless and portable design, a one-size-fits-most fit, and 3 adjustable heat levels for enhanced comfort.
Image: A diagram visually explains the four available air compression massage programs: alternating, sequential, pulsing, and full, each offering a different massage pattern for varied therapeutic needs.
Video: This official video from Homedics provides a comprehensive demonstration of the Modulair Compression System, showcasing how to use the foot wrap, its various features, and the benefits of compression therapy.
Care and Maintenance
To ensure the longevity and hygiene of your HoMedics Modulair Compression Foot Wrap Massager, follow these general care guidelines:
- Cleaning: Wipe the surface of the foot wrap and controller with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect the wrap and controller for any signs of wear or damage. Discontinue use if any damage is found.
Troubleshooting
If you encounter issues with your HoMedics Modulair Compression Foot Wrap Massager, please refer to the following common solutions:
- Device Not Turning On: Ensure the universal controller is securely attached to the foot wrap and fully charged.
- Weak Compression: Check that the foot wrap is securely fastened around your foot. Adjust the intensity setting on the controller to a higher level.
- No Heat: Verify that the heat function is activated on the controller and allow a few minutes for the heat to build up.
- Short Battery Life: Ensure the controller is charged using the correct USB-C adapter. If battery performance significantly degrades, contact customer support.
For persistent issues, please refer to the detailed instruction bulletin or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 2.5 x 13 x 9 inches |
| Item Model Number | SR-CMF10HJ |
| Manufacturer | Homedics |
| Use For | Feet |
| Power Source | Battery Powered (Controller Sold Separately) |
| Material | Rubber |
| Item Weight | 0.51 Kilograms (1.12 Pounds) |
Warranty
The HoMedics Modulair Compression Foot Wrap Massager comes with a 2-Year Limited Warranty. Please refer to the included warranty information in your package for full details on coverage and how to make a claim.
Customer Support
For further assistance, detailed instructions, or product inquiries, please:
- Consult the comprehensive Instruction Bulletin included in your package.
- Visit the official HoMedics Store on Amazon.
