Jocoevol Round Dining Table (Vintage, 47-Inch) Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, usage, and maintenance of your Jocoevol Round Dining Table. Please read this manual thoroughly before assembly and use to ensure safe and proper operation. Keep this manual for future reference.

The Jocoevol 47-inch round dining table is designed to comfortably seat 4 to 6 people, making it suitable for various dining spaces. It features a sturdy construction with a thickened MDF tabletop and reinforced metal legs, complemented by a convenient storage shelf.

2. Important Safety Information

Failure to follow these safety instructions may result in injury or damage to the product.

• Do not exceed the maximum weight capacity of 300 pounds.
• Ensure the table is stable and does not wobble after assembly. Adjust leveling feet if necessary.
• Anchor the table to the wall to prevent tipping, especially if children are present. (Anchoring hardware not explicitly listed, but recommended for safety).
• Follow assembly instructions carefully to ensure safety and structural integrity.
• Keep small parts and packaging materials away from children.
• Use the table on a flat, level surface.

3. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Tabletop (1)
• Pedestal Base Components (Metal Legs, Crossbars)
• Storage Shelf (1)
• Accessory Bag (Screws, bolts, washers, Allen wrench, screwdriver)
• Instruction Manual (1)

4. Assembly Instructions (Setup)

Assembly typically takes approximately 30-40 minutes with two people. Ensure you have enough space and a soft, clean surface to prevent scratching the table components during assembly.

Tools Required:

• Included Allen Wrench
• Included Screwdriver

Step-by-Step Assembly:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface. Refer to the parts list and diagrams to identify each piece.
2. Assemble the Pedestal Base: Attach the metal legs to the crossbars using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten screws until the entire base is assembled.
3. Install the Storage Shelf: Secure the storage shelf to the designated points on the pedestal base using the appropriate hardware.
4. Attach Tabletop to Base: Carefully place the tabletop upside down on your soft surface. Align the assembled pedestal base with the pre-drilled holes on the underside of the tabletop. Attach the base to the tabletop using the provided screws.
5. Tighten All Screws: Once all components are loosely assembled, gradually tighten all screws and bolts. Ensure the table is stable and level.
6. Upright the Table: With assistance, carefully flip the table upright. Place it in its desired location.

Figure 1: Product Dimensions. This diagram illustrates the overall dimensions of the table, including the 47.2-inch tabletop diameter and 30-inch height, which are crucial for planning your space and confirming parts.

Figure 2: Key Features. This image details the vintage tabletop finish, the robust 25mm thick iron tubes forming the base, and the integrated storage shelf, providing a visual guide to the table's construction and functionality.

5. Usage Guidelines (Operating)

Your Jocoevol Round Dining Table is designed for versatile use in your kitchen or dining area.

• Seating Capacity: The 47-inch tabletop comfortably accommodates 4 to 6 individuals. The round design promotes easy conversation and interaction.
• Storage Shelf: Utilize the integrated storage shelf for organizing tableware, placemats, napkins, or other kitchen essentials. This helps keep your tabletop clear and organized.
• Placement: Position the table in an area that allows sufficient space for chairs to be pulled out and for people to move around comfortably.

Figure 3: Table in Use with Storage. This image shows the table set up with four chairs, highlighting how the lower shelf can be used for convenient storage of items like coffee bags or small containers, enhancing its practical utility.

6. Care and Maintenance

Proper care will help maintain the appearance and longevity of your dining table.

• Cleaning: Wipe the tabletop and metal frame with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Spills: Clean up spills immediately to prevent staining, especially on the wood-grain tabletop.
• Heat Protection: Although the MDF tabletop is heat-resistant, it is recommended to use coasters and placemats to protect the surface from hot dishes and prolonged heat exposure.
• Scratch Prevention: Avoid dragging sharp or heavy objects across the tabletop. Use felt pads under decorative items.
• Regular Checks: Periodically check and tighten all screws and bolts to ensure the table remains stable.

7. Troubleshooting

Common Issues and Solutions:

• Table Wobbles:
  • Ensure all screws and bolts are fully tightened.
  • Check if the floor surface is even. Adjust the leveling feet on the base if present.
  • Verify that all components are assembled correctly according to the instructions.
• Missing Parts or Damaged Components:
  • Carefully re-check all packaging materials. Small parts can sometimes be overlooked.
  • Contact Jocoevol customer support immediately for assistance. Provide your purchase details and a description of the missing or damaged item.
• Difficulty Aligning Holes During Assembly:
  • Do not fully tighten any screws until all components are loosely fitted together. This allows for minor adjustments.
  • Ensure you are using the correct screws for each step as indicated in the instructions.

8. Product Specifications

9. Warranty Information

Jocoevol products are manufactured to high-quality standards. For specific warranty details regarding your Round Dining Table, please refer to the warranty card included with your purchase or contact Jocoevol customer support directly. Typically, manufacturer warranties cover defects in materials and workmanship under normal use.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Jocoevol customer support.

• Brand: Jocoevol
• Contact: Please refer to the contact information provided in your product packaging or visit the official Jocoevol website for support options.
• Response Time: Jocoevol is dedicated to excellent service and aims to respond to inquiries within 24 hours.