Introduction
Thank you for choosing the Shintenchi Swivel Bar Stools. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new bar stools. Please read this guide thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
Safety Information
Always assemble according to the instructions provided. Be cautious when using the swivel function and keep the stool away from edges to prevent tipping. Do not exceed the maximum weight limit of 300 pounds (136 kg). Ensure all connections are secure before use. Keep small parts away from children during assembly.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Seat Cushions with Backrest
- 2 x Gas Lift Cylinders
- 2 x Round Bases
- 2 x Footrests
- Hardware Pack (screws, washers, Allen wrench)
Assembly Instructions
Follow these steps to assemble your Shintenchi Swivel Bar Stools. It is recommended to assemble on a soft, clean surface to prevent scratches.
- Attach the Gas Lift to the Base: Carefully insert the wider end of the gas lift cylinder into the center hole of the round base. Ensure it is seated firmly.
- Install the Footrest: Slide the footrest over the gas lift cylinder. Ensure the footrest is oriented correctly, with the wider opening facing down towards the base.
- Attach the Seat to the Gas Lift: Align the mounting plate under the seat cushion with the top of the gas lift cylinder. Gently press the seat onto the gas lift until it is securely in place.
- Secure the Seat: Use the provided screws and Allen wrench to firmly attach the seat to the gas lift mechanism. Ensure all screws are tightened evenly to prevent wobbling.
Image: Front view of the assembled bar stool, showcasing its design.
Image: Side view of the assembled bar stool, highlighting the footrest and gas lift.
Operating Instructions
Your Shintenchi Swivel Bar Stools are designed for ease of use and comfort.
Height Adjustment
To adjust the height of the stool:
- To Raise: While standing, lift the lever located under the seat. The seat will automatically rise. Release the lever at the desired height.
- To Lower: While seated, lift the lever located under the seat. The seat will lower under your weight. Release the lever at the desired height.
Image: Visual representation of the height adjustment mechanism and 360-degree swivel capability.
Swivel Function
The stool features a 360-degree swivel function, allowing for easy rotation. Simply turn the seat in any direction. Ensure the base is stable on the floor before swiveling.
Image: Diagram showing the ergonomic adjustable barstool with its 360-degree swivel for convenience.
Maintenance
Proper care will extend the life and appearance of your bar stools.
Cleaning
- Faux Leather Upholstery: Wipe clean with a soft, damp cloth. For tougher stains, use a mild soap solution and immediately wipe dry. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Metal Base and Frame: Wipe with a soft, dry cloth. Avoid prolonged exposure to moisture to prevent rust.
Image: Details on the soft sponge and PU leather material, emphasizing its skin-friendly and water-resistant properties.
General Care
- Periodically check all screws and connections to ensure they remain tight. Retighten as necessary.
- Avoid placing the stools in direct sunlight or near heat sources to prevent material degradation.
- Do not stand on the stools or use them as a ladder.
Troubleshooting
If you encounter any issues with your bar stools, refer to the following common problems and solutions:
- Stool is wobbly: Ensure all assembly screws are tightened securely. Check that the base is on a flat, even surface.
- Difficulty lowering the seat: Ensure you are seated on the stool when attempting to lower it, as the gas lift requires weight to compress. If the issue persists, the gas lift cylinder may need inspection or replacement.
- Missing parts during assembly: If any screws or components were missing upon arrival, please contact customer support immediately for assistance.
Specifications
| Product Dimensions | 16"D x 16"W x 42.9"H (40.6 cm D x 40.6 cm W x 108.9 cm H) |
| Adjustable Height Range | Seat height: 19.3" - 29.5" (49 cm - 75 cm) |
| Color | Black |
| Brand | Shintenchi |
| Material | Faux Leather (Seat), Metal (Frame, Base) |
| Maximum Weight Recommendation | 300 Pounds (136 kg) |
| Assembly Required | Yes |
| Number of Pieces | 2 |
Image: Comprehensive diagram illustrating all key dimensions of the bar stool.
Image: Visual guide to seat height, counter height, and bar height options for versatile use.
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official Shintenchi website. Please have your model number (Swivel Stools) and ASIN (B0DL5R3VJM) ready when contacting support.