LVB 78.7 Inch Black Oak Computer Desk Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your new LVB 78.7 Inch Black Oak Computer Desk. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The LVB 78.7 Inch Black Oak Computer Desk is designed for versatility and durability, suitable for various uses including computer work, creative projects, writing, conferences, or gaming. It features a sleek design with a black oak finish and sturdy metal frames.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the desk on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly to avoid damaging the material.
• This desk has a maximum weight capacity of 500 lbs (226.8 kg). Do not exceed this limit.
• Keep small parts away from children during assembly.
• Regularly check all fasteners to ensure they remain tight.

Package Contents

Please verify that all components listed below are present in your package.

Parts List

Hardware List

Note: The hardware is typically separated and labeled for ease of assembly.

Assembly Instructions

Follow these steps carefully to assemble your desk. It is recommended to have two people for certain steps.

Step 1: Assemble Desktop Panels

Lay out the main desktop panel (1) and two side desktop panels (2) face down on a soft, clean surface. Ensure the edges align properly.

Image: Fully assembled LVB 78.7 Inch Black Oak Computer Desk in an office environment.

Attach the flat brackets (7) to connect the desktop panels using M6*15mm bolts (A) and the Allen key (B). Secure all 8 bolts.

Video: Official LVB Furniture video demonstrating the assembly process for a similar 70-inch desk, which shares many assembly steps with this 78.7-inch model.

Step 2: Attach Short Metal Tubes

Position the short metal tubes (4) along the edges of the assembled desktop panels.

Secure the short metal tubes (4) to the desktop panels using M6*10mm bolts (F) and the Allen key (B). Ensure all 32 bolts are tightened.

Step 3: Attach Angle Iron Brackets

Place the angle iron brackets (6) along the inner edges of the desktop panels, ensuring the holes face inwards.

Fasten the angle iron brackets (6) to the desktop panels using M6*40mm bolts (C) and the Allen key (B). Do not fully tighten all bolts at this step.

Step 4: Install X-Shaped Leg Frames

Attach the two X-shaped leg frames (3) to the desktop assembly. The leg frames have a distinct design; ensure the double-patterned side faces the front of the desk.

Secure the leg frames to the desktop using M6*40mm bolts (C) and the Allen key (B). Fully tighten all bolts for the leg frames.

Image: Close-up view of the X-shaped metal leg frame, emphasizing its robust design.

Step 5: Attach Long Metal Tubes

Connect the long metal tubes (5) between the two X-shaped leg frames (3) using M6*70mm bolts (E) and the Allen key (B).

Ensure all connections are secure.

Step 6: Install Leveling Feet and Plugs

Insert the leveling feet (D) into the bottom of the leg frames. Adjust the leveling feet as needed to ensure the desk is stable and level on uneven floors.

Insert the plastic plugs (G) into any remaining open holes on the metal tubes for a finished appearance. These are optional.

Image: Product dimensions and weight capacity of the LVB 78.7 Inch Computer Desk.

Operating Instructions

Your LVB 78.7 Inch Black Oak Computer Desk is designed for immediate use upon successful assembly.

• Surface Use: The expansive desktop provides ample space for multiple monitors, laptops, keyboards, and other office or gaming equipment.
• Weight Distribution: Distribute weight evenly across the desktop to maintain stability and prevent stress on any single point.
• Adjustable Feet: If your floor is uneven, rotate the leveling feet (D) at the bottom of the leg frames to stabilize the desk and eliminate wobbling.
• Legroom: The open design beneath the desk provides generous legroom, allowing for comfortable seating and movement.

Maintenance

• Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood finish.
• Heat Protection: Use coasters or heat-resistant pads under hot items to protect the desktop surface.
• Regular Checks: Periodically inspect all bolts and connections to ensure they remain tight. Retighten if necessary.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or discoloration of the desktop finish.

Troubleshooting

Desk is Wobbly

• Check that all assembly bolts (A, C, E, F) are securely tightened.
• Adjust the leveling feet (D) on the bottom of each leg until the desk is stable on your floor.

Parts Missing or Damaged

• Refer to the "Package Contents" section to verify all parts.
• Contact LVB customer support for assistance with replacement parts.

Difficulty Assembling

• Review the "Assembly Instructions" carefully, paying close attention to the diagrams.
• Ensure that components are oriented correctly (e.g., angle iron holes facing inwards, leg frame double-patterned side facing front).
• Do not fully tighten all bolts until instructed, as this allows for minor adjustments during assembly.

Specifications

Warranty and Support

This product comes with a limited warranty. For specific warranty details and to register your product, please visit the official LVB website or contact customer support.

If you encounter any issues or have questions regarding your LVB desk, please contact our customer support team for assistance.

• Online Support: Visit the LVB Store on Amazon.
• Email Support: Refer to your product packaging or the LVB website for direct email contact.