Introduction
Thank you for choosing the Parblo PR120 Drawing Tablet Stand. This stand is designed to provide stable and ergonomic support for your drawing monitor or graphic tablet, enhancing your creative workflow. It features broad device compatibility, ergonomic angle adjustment, and heavy-duty stability. Please read this manual carefully before use to ensure proper setup and operation.
Safety Information
- Ensure all components are securely fastened before placing a device on the stand.
- Do not exceed the maximum load capacity of 40kg (88lbs).
- Keep the stand away from extreme temperatures and direct sunlight.
- Avoid placing the stand on unstable or uneven surfaces.
- Keep out of reach of children.
Package Contents
Verify that all items are present in the package:
- Parblo PR120 Stand × 1
- L Shaped Screwdriver × 1
- Screws × 4
Image: Package contents showing the PR120 stand, L-shaped screwdriver, and four screws.
Setup Instructions
Follow these steps to set up your Parblo PR120 Drawing Tablet Stand:
- Identify VESA Mounting Holes: Locate the VESA mounting holes on the back of your drawing monitor or graphic tablet. The PR120 stand supports both 75x75mm and 100x100mm VESA patterns.
- Attach the Stand: Align the mounting plate of the PR120 stand with the VESA holes on your device. Use the provided screws and L-shaped screwdriver to securely fasten the stand to your monitor or tablet. Ensure all four screws are tightened evenly.
- Place on a Stable Surface: Once attached, place the assembled device and stand on a flat, stable surface. The anti-slip sleeves on the stand's legs provide additional stability.
Image: VESA mounting patterns supported by the stand.
Image: Attaching the stand to a monitor.
Operating Instructions
The Parblo PR120 stand allows for easy and ergonomic angle adjustments:
- Adjusting the Tilt Angle: To change the tilt angle, gently lift the locking mechanism tab located on the stand's arm.
- Set Desired Angle: While holding the tab, adjust your device to the desired angle between 20° and 80°. The stand's ergonomic design helps reduce neck and wrist strain.
- Lock the Angle: Release the locking mechanism tab to secure the stand at the chosen angle. Ensure it is firmly locked before use.
Image: Mechanism for adjusting the tilt angle.
Image: Demonstrating the 20° to 80° tilt angle range.
Compatibility
The Parblo PR120 Drawing Tablet Stand is universally compatible with displays featuring VESA mounting holes (75x75mm and 100x100mm). It is designed to support screens ranging from 13.3 inches to 32 inches, including various drawing monitors and graphic tablets.
Image: Stand supporting a large drawing tablet, highlighting broad size compatibility.
Maintenance
To ensure the longevity and optimal performance of your Parblo PR120 stand:
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Storage: When not in use for extended periods, store the stand in a clean, dry environment.
Troubleshooting
If you encounter issues with your Parblo PR120 stand, refer to the following:
- Stand feels unstable: Ensure the stand is placed on a flat, level surface. Verify that all screws attaching the device to the stand are securely tightened. Check that the angle locking mechanism is fully engaged.
- Difficulty adjusting angle: Ensure the locking mechanism tab is fully lifted before attempting to adjust the angle. Do not force the adjustment. If resistance persists, check for any obstructions.
- Device slipping: Confirm that your device's weight does not exceed the 40kg (88lbs) maximum load. Ensure the anti-slip sleeves on the stand's legs are clean and intact.
Specifications
| Model Number | PR120 |
| Product Dimensions | 8.46 x 2.95 x 12.4 inches |
| Item Weight | 1.34 pounds |
| Maximum Load Capacity | 40kg (88lbs) |
| Adjustable Angle Range | 20° to 80° |
| VESA Compatibility | 75x75mm, 100x100mm |
| Compatible Screen Sizes | 13.3 to 32 inches |
| Materials | Zinc Alloy (legs), ABS, Anti-Slip Sleeves |
Image: Stable and durable design features of the stand.
Warranty and Support
Parblo products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Parblo website or contact your local retailer. Keep your purchase receipt as proof of purchase for any warranty claims.
