Introduction
Thank you for choosing the mooas Newtro Flip Desk Clock. This manual provides detailed instructions to ensure proper setup, operation, and care of your clock. Please read this manual thoroughly before use and retain it for future reference.
Image: The mooas Newtro Flip Desk Clock in various color options, showcasing its design.
Setup
1. Battery Installation
- Locate the battery compartment cover on the back of the clock.
- Open the cover.
- Insert two (2) AA batteries, ensuring correct polarity (+/-). Batteries are not included.
- Close the battery compartment cover securely.
2. Time Setting
- Locate the time setting cover on the back of the clock.
- Open the cover.
- Press the hour pin down with a click to set the hour first.
- Then, set the minutes. Note: If you set the minutes first, the hour pin may not work properly.
- Close the time setting cover.
Image: Visual guide for installing batteries and setting the time on the clock.
3. Placement Options
The mooas Newtro Flip Desk Clock is designed for versatile placement. It can be used as a desk clock or mounted on a wall.
- Desk Placement: Simply place the clock on any flat surface such as a desk, shelf, or bedside table.
- Wall Mounting: The clock features a wall-mount slot on the back for easy hanging. Ensure the mounting surface is secure.
Image: Demonstrating the two ways to use the clock: as a wall clock or a desk clock.
Operating Instructions
Automatic Time Display
Once batteries are installed and the time is set, the clock will automatically display the time. The numbers on the flip mechanism will change smoothly as time progresses.
- AM/PM Indicator: The clock includes an AM/PM indicator for clear distinction between morning and afternoon hours.
- Number Visibility: The bold numeral design ensures high legibility from a distance.
Image: Detail of the clock face showing the AM/PM indicator.
Sound of Operation
The flip mechanism produces a subtle sound as the numbers change. This is a normal characteristic of flip clocks and indicates proper operation.
Video: Demonstration of the mooas Newtro Flip Clock's automatic flipping mechanism and overall design.
Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or the transparent cover.
- Battery Replacement: Replace batteries when the clock starts to lose accuracy or the numbers stop flipping smoothly. Always use new AA batteries.
- Transparent Cover: The clock features a transparent front cover designed to protect the flip cards from dust and damage. Keep this cover clean for optimal visibility.
Image: The transparent cover of the clock, designed for protection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock not keeping accurate time or stopping. | Low batteries or improperly installed batteries. | Replace with two new AA batteries, ensuring correct polarity. |
| Numbers not flipping smoothly or getting stuck. | Low batteries or a minor obstruction. | Replace batteries. Gently check for any debris or obstruction around the flip cards. If the issue persists, ensure the time was set correctly (hour first, then minutes). |
| Hour or minute display is incorrect after setting. | Time setting procedure not followed correctly. | Reset the time by pressing the hour pin first, then the minute pin. Refer to the "Time Setting" section. |
Specifications
| Feature | Detail |
|---|---|
| Brand | mooas |
| Model Number | MC-F3 |
| Display Type | Analog (Flip) |
| Power Source | Battery Powered (2 x AA batteries, not included) |
| Material | ABS, AS (Acrylonitrile Butadiene Styrene), Plastic |
| Product Dimensions (W x H) | 6.9 inches x 2.8 inches |
| Mounting Type | Wall Mount, Tabletop |
| Operation Mode | Automatic |
| Special Features | Automatic Flip, AM/PM Indicator, Transparent Cover |
Image: Key specifications of the mooas Newtro Flip Desk Clock.
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact mooas customer service directly. Contact details can typically be found on the manufacturer's official website or on the product's retail page.