Introduction
Thank you for choosing the Livoo PURE'UP Multi-Surface Cleaner, Model DOH144-500W. This appliance is designed for efficient deep cleaning of various surfaces, including textiles and hard floors. To ensure safe and optimal performance, please read this manual thoroughly before first use and retain it for future reference.
Image: Front view of the Livoo PURE'UP Multi-Surface Cleaner, showcasing its compact design and two transparent water tanks.
Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.
- Read all instructions before use.
- Do not immerse the appliance in water or other liquids.
- Do not use the appliance if the power cord or plug is damaged.
- Keep children and pets away from the appliance during operation.
- Use only manufacturer-recommended attachments.
- Unplug the appliance before cleaning or maintenance.
- Do not use flammable or combustible liquids to clean.
Product Components
The Livoo PURE'UP Multi-Surface Cleaner comes with several components designed for versatile cleaning.
- Main Unit (with integrated clean and dirty water tanks)
- Flexible Suction Hose (1.3 m)
- Multi-Surface Brush
- Crevice Tool
- Squeegee (17.5 cm)
- Power Cord (5 m)
Image: All components of the Livoo PURE'UP Multi-Surface Cleaner, including the main unit, flexible hose, multi-surface brush, crevice tool, and squeegee.
Setup
- Unpacking: Carefully remove all components from the packaging. Ensure all parts listed in the "Product Components" section are present.
- Filling the Clean Water Tank:
- Locate the clean water tank (1300 ml capacity).
- Remove the tank and fill it with clean water, optionally adding a suitable cleaning solution as per solution manufacturer's instructions. Do not overfill.
- Securely reattach the clean water tank to the main unit.
- Attaching the Hose: Connect the flexible suction hose to the designated port on the main unit until it clicks into place.
- Attaching Accessories: Select the appropriate cleaning accessory (multi-surface brush, crevice tool, or squeegee) for your task and firmly attach it to the end of the hose.
Operating Instructions
- Power Connection: Plug the power cord into a suitable electrical outlet. The 5-meter cord provides ample reach.
- Starting the Appliance: Press the power button located on the main unit to turn on the cleaner.
- Cleaning Surfaces:
- For Wet Cleaning (e.g., carpets, upholstery, hard floors with solution): Hold the accessory over the area to be cleaned. Press the trigger on the hose handle to spray water/solution onto the surface. Move the accessory slowly over the wet area to vacuum up the liquid and dirt. Repeat as necessary.
- For Dry Vacuuming (e.g., dust, small debris): Use the appropriate accessory without pressing the spray trigger. Move the accessory over the surface to vacuum up dry particles.
- Monitoring Dirty Water Tank: The dirty water tank has a 600 ml capacity. Monitor its level and empty it when full to maintain optimal suction.
- Finishing Cleaning: Once cleaning is complete, press the power button to turn off the appliance and unplug it from the electrical outlet.
Maintenance
Regular maintenance ensures the longevity and efficiency of your Livoo PURE'UP cleaner.
- Emptying and Cleaning Water Tanks:
- After each use, remove both the clean and dirty water tanks.
- Empty the dirty water tank and rinse both tanks thoroughly with clean water.
- Allow tanks to air dry before reattaching them to the unit.
- Cleaning Accessories: Rinse all used accessories under running water to remove any debris or residue. Allow them to dry completely.
- Hose Cleaning: Periodically check the hose for blockages. If necessary, rinse it with water.
- External Cleaning: Wipe the main unit with a damp cloth. Do not use abrasive cleaners or solvents.
- Storage: The appliance features a carry handle, hose storage, cord wrap, and accessory storage for convenient organization. Store the cleaner in a dry place, away from direct sunlight and extreme temperatures.
Image: Rear view of the Livoo PURE'UP Multi-Surface Cleaner, showing the integrated power cord wrap and hose storage features.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in; power outlet faulty; power button not pressed. | Ensure power cord is securely plugged in. Test outlet with another device. Press power button firmly. |
| Low suction power. | Dirty water tank full; hose or accessory blocked; tanks not properly seated. | Empty and clean the dirty water tank. Check hose and accessories for obstructions. Ensure tanks are securely attached. |
| No water spray. | Clean water tank empty; spray nozzle blocked; trigger not pressed. | Refill the clean water tank. Check spray nozzle for blockages. Ensure spray trigger is pressed during operation. |
| Water leaking from unit. | Tanks not properly sealed; hose not securely attached. | Ensure both clean and dirty water tanks are correctly installed and sealed. Verify hose connection. |
Specifications
- Model: DOH144
- Power: 500 W
- Suction Power: 11-13 kPa
- Clean Water Tank Capacity: 1300 ml
- Dirty Water Tank Capacity: 600 ml
- Hose Length: 1.3 m
- Power Cord Length: 5 m
- Sound Level: Max 82 dB
- Product Dimensions (L x W x H): 34 x 27 x 33 cm
- Weight: 5.26 kg
- Material: Plastic
Warranty and Support
This Livoo PURE'UP Multi-Surface Cleaner, Model DOH144, is covered by a warranty for spare parts availability for 2 years from the date of purchase. For warranty claims, technical support, or inquiries regarding spare parts, please contact your retailer or the official Livoo customer service.
Please retain your proof of purchase for warranty purposes.
