HiBy R1 HiFi MP3 Player Instruction Manual

Introduction

The HiBy R1 is a portable HiFi music player designed for high-resolution audio playback. It features a built-in CS43131 DAC chip, supporting DSD 256 native and PCM 384kHz audio formats. The device runs on HiByOS, offering a smooth user experience with enhanced Bluetooth stability. It supports various music file types including MP3, WAV, APE, FLAC, DSF, DFF, ISO, CUE, WMA, OGG, AAC, Opus, and AIFF. The R1 also includes Bluetooth 5.1 for wireless audio output and Wi-Fi for online streaming services like Tidal and Qobuz.

Package Contents

The HiBy R1 package typically includes the following items:

• HiBy R1 MP3 Player
• Storage Pouch
• USB2.0 Data Cable
• Lanyard
• Card Pin (for Micro SD card slot)
• User Manual
• Warranty Card
• Protective Films (3 total, 2 pre-applied)

Note: The "Value Set" package may include additional items such as a 32GB Micro SD Card and Yves Earphones.

Image: HiBy R1 package contents showing the player, pouch, cable, and other accessories. The image also illustrates the difference between the Regular Version and the Set Version, which includes a 32GB Micro SD card and Yves Earphones.

Setup

1. Inserting a Micro SD Card

The HiBy R1 requires a Micro SD card for music storage. It supports up to 2TB of expandable storage. Locate the Micro SD card slot on the device. Use the provided card pin to gently push the card into the slot until it clicks into place. To remove, push again until it springs out.

Image: Close-up of the HiBy R1 showing the Micro SD card slot and a Micro SD card being inserted, illustrating the device's expandable storage capability up to 2TB.

2. Charging the Device

Connect the HiBy R1 to a power source using the provided USB-C cable. The device features a 1150mAh battery, offering up to 15 hours of playback. A full charge typically takes a few hours.

3. Initial Firmware Update

It is recommended to update the firmware to the latest version upon first use. Firmware updates often include important fixes and performance enhancements. Connect the device to Wi-Fi and navigate to the system settings to check for and install updates.

Operating Instructions

1. Power On/Off and Basic Navigation

Press and hold the power button to turn the device on or off. The HiBy R1 features a 3-inch IPS touchscreen with an 800x480 resolution for navigation. Use touch gestures to browse menus, select tracks, and adjust settings.

Image: The HiBy R1 displaying its 3-inch IPS touchscreen with 800x480 resolution, showing a music playback interface.

2. Music Playback

After inserting a Micro SD card with music files, the device will scan and organize your library. You can browse music by artist, album, genre, or file. Tap on a track to begin playback. The player supports various high-resolution lossless audio formats.

Image: A person wearing headphones, enjoying music from the HiBy R1 player. The screen shows a music track playing with album art, indicating the device's Hi-Res Audio and Hi-Res Audio Wireless certifications.

3. Bluetooth Connectivity

The HiBy R1 features Bluetooth 5.1 for connecting to wireless headphones or speakers. It supports high-resolution codecs including LDAC, aptX, AAC, and SBC. To pair, go to the Bluetooth settings, enable Bluetooth, and search for available devices. Select your desired audio-receiving device to connect. Note: The R1's Bluetooth is output-only and cannot pair with PCs, phones, or other players.

Image: The HiBy R1 player with wireless earbuds, illustrating Bluetooth 5.1 connectivity and supported codecs like LDAC, aptX, AAC, and SBC. It also highlights Wi-Fi music transfer.

4. Wi-Fi and Streaming Services

Connect the device to a Wi-Fi network to access online streaming services such as Tidal and Qobuz (online only) and internet radio. Navigate to the "Stream media" section to use these features.

Image: The HiBy R1 screen showing options for streaming services like Tidal and Qobuz, indicating its Wi-Fi capabilities for online music access.

5. MSEB Tuning

The built-in MSEB (MageSound 8-Ball) mixer allows for personalized sound tuning. Access this feature through the system settings to adjust various audio parameters to your preference.

Image: A screenshot of the HiBy R1's MSEB (MageSound 8-Ball) tuning interface, showing various sliders for audio customization such as temperature, bass extension, and note thickness.

6. Volume Limiter

To protect your hearing, the HiBy R1 includes a volume limiter. To disable this feature:

1. Tap the system serial number below the HIBY logo 5 times.
2. Exit the "About Player" page.
3. Go to "System" > "Developer Options" > "Volume Lock" > "Disable" to enter Developer Mode.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the player in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50%.
• Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance and access to new features.

Troubleshooting

Device Not Powering On

• Ensure the device is fully charged. Connect it to a power source and wait a few minutes before attempting to power on.
• Try holding the power button for an extended period (10-15 seconds) to perform a hard reset.

Sluggish User Interface

• Ensure the firmware is updated to the latest version.
• Restart the device.
• If you have a very large music library (e.g., close to 50,000 songs), some slowdown may occur due to the device's processing capabilities.

Bluetooth Connectivity Issues

• Ensure the target Bluetooth device is in pairing mode.
• Verify that the HiBy R1's Bluetooth is enabled.
• Remember that the R1's Bluetooth is output-only and cannot connect to non-audio receiving devices like computers or smartphones.
• If connecting to a car's Bluetooth, compatibility may vary. Consider using an AUX connection if available.

Micro SD Card Not Recognized

• Ensure the Micro SD card is properly inserted into the slot.
• Try re-inserting the card.
• Test the Micro SD card in another device to confirm it is functional.
• Ensure the card is formatted correctly (e.g., FAT32 or exFAT).

Specifications

Warranty Information

The HiBy R1 comes with a one-year free maintenance service from the date of purchase. This warranty covers product damage not caused by human factors. Please retain your proof of purchase for warranty claims.

Support

Should you encounter any problems during use or have questions not covered in this manual, please do not hesitate to contact HiBy customer support. Refer to the warranty card or the official HiBy website for specific contact details.

Official HiBy Store on Amazon: Visit the HiBy Store

Official Product Video