RC-1115 Replacement Remote Control User Manual

1. Introduction

This manual provides comprehensive instructions for the Beyution RC-1115 Replacement Remote Control. Designed as a direct replacement for various Denon AV Surround Receivers, this infrared remote control requires no complex programming or pairing. It is ready to use right out of the box, offering a convenient solution for replacing a damaged or lost original remote.

The RC-1115 features a lightweight and ergonomic design, ensuring a comfortable grip. Its buttons are designed with good elasticity, requiring only a light press for perfect functionality. With upgraded smart chips, it offers a stable performance and a transmitting distance of up to 10 meters.

2. Setup

2.1 Battery Installation

The RC-1115 remote control operates on two AAA batteries (not included). Follow these steps to install the batteries:

1. Locate the battery compartment on the back of the remote control.
2. Press down on the tab and slide the battery cover downwards to open it.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Figure 2.1: Battery compartment of the RC-1115 remote control.

This image displays the rear of the RC-1115 remote control, with the battery cover removed, revealing the two slots for AAA batteries. The internal springs and contact points are visible, indicating where the batteries should be inserted according to polarity markings.

Once batteries are installed, the remote is ready for use. No additional programming or pairing is required.

3. Operating Instructions

The RC-1115 remote control is designed for intuitive operation. Simply point the remote towards your Denon AV Surround Receiver and press the desired button.

Figure 3.1: Front view of the RC-1115 remote control.

This image shows the complete layout of the RC-1115 remote control, featuring all its buttons. The top section includes power and input selection buttons (DVD, VCR/iPod, V.AUX, EXT.IN, CD, CD-R/TAPE, AUX, TUNER). Below are the numeric keypad (0-9, PRESETS, BAND). The central section contains navigation buttons (SETUP, D.INPUTS, TEST, STATUS, DIMMER, SURROUND PARAMETER, VOLUME, MEMORY/ENTER, directional arrows). The bottom section includes audio/video controls (CH SEL, NIGHT, STEREO, TONE, SEARCH, MUTE, SURROUND, CHANNEL +/-, and iPod playback controls like skip, repeat, random).

3.1 Key Functions Overview

• OFF/ON: Power on or off your Denon receiver.
• Input Selectors (DVD, VCR/iPod, V.AUX, EXT.IN, CD, CD-R/TAPE, AUX, TUNER): Select the desired audio/video input source.
• Numeric Keypad (0-9): Directly select radio stations or other numbered functions.
• PRESETS: Access stored radio station presets.
• BAND: Switch between AM/FM radio bands.
• VOLUME (+/-): Adjust the master volume level.
• MUTE: Temporarily silence the audio output.
• CHANNEL (+/-): Navigate through radio channels or other sequential selections.
• Navigation Arrows (Up, Down, Left, Right) and MEMORY/ENTER: Navigate menus and confirm selections.
• SETUP: Access the receiver's setup menu.
• D.INPUTS: Cycle through digital input options.
• TEST: Initiate speaker test tones.
• STATUS: Display current status information on screen.
• DIMMER: Adjust the brightness of the receiver's display.
• SURROUND PARAMETER: Adjust surround sound settings.
• CH SEL: Select individual channels for adjustment.
• NIGHT: Activate night listening mode.
• STEREO: Switch to stereo audio mode.
• TONE: Access tone control settings (bass/treble).
• SEARCH: Initiate search functions for radio or media.
• SURROUND: Cycle through various surround sound modes.
• iPod Controls (Play/Pause, Skip, Repeat, Random): Control playback for connected iPod devices.

4. Care and Maintenance

To ensure the longevity and optimal performance of your RC-1115 remote control, please follow these care guidelines:

• Cleaning: Use a soft, dry cloth to wipe the surface of the remote. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials, as they can damage the remote's finish or buttons.
• Battery Replacement: Replace batteries when the remote's response becomes sluggish or the operating range decreases. Always replace both batteries at the same time with new ones. Remove batteries if the remote will not be used for an extended period to prevent leakage.
• Storage: Store the remote in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
• Avoid Drops: While durable, repeated drops can damage internal components. Handle the remote with care.

5. Troubleshooting

If you encounter any issues with your RC-1115 remote control, please refer to the following table for common problems and their solutions:

If the problem persists after trying these solutions, please contact customer support for further assistance.

6. Specifications

7. Compatible Models

The RC-1115 Replacement Remote Control is compatible with a wide range of Denon AV Surround Receivers. Please note that this list is not exhaustive, but includes the most commonly supported models:

• AVR-390
• AVR-3801
• AVR-3802
• AVR-3804
• AVR-3805
• AVR-3806
• AVR-3807
• AVR-1610
• AVR-1705
• AVR-1804
• AVR-2105
• AVR3801
• AVR-3803
• AVR-2807
• AVR2807
• AVR-2808
• AVR2808
• AVR-2809
• AVR2809
• AVR390
• AVR3803

If your device model is not listed, or if you are unsure about compatibility, please contact the seller before purchasing to confirm.

8. Support and Contact Information

For any questions, concerns, or issues regarding your RC-1115 Replacement Remote Control, please contact the seller directly through the platform where you made your purchase. They are committed to providing satisfactory solutions for any product-related inquiries, including damaged or non-working units.

9. Warranty Information

Specific warranty details for the Beyution RC-1115 Replacement Remote Control are not provided in the product information. For any warranty-related inquiries or claims, please contact the seller directly. They will be able to provide information regarding their return or replacement policies.